Red Hat Summit이 콘텐츠는 선택한 언어로 제공되지 않습니다.
Chapter 2. Using Ansible Builder
2.1. Installing Ansible Builder
You can install Ansible Builder using Red Hat Subscription Management to register and attach to your Red Hat Ansible Automation Platform subscription. In your terminal, run the following command:
dnf install ansible-builder
$ dnf install ansible-builderYou can also install Ansible Builder from the Python Package Index (PyPI). To install with this setup, run:
pip install ansible-builder
$ pip install ansible-builder2.2. Building a definition file
Once you have Ansible Builder installed, we will need to create a definition file which Ansible Builder will use to create your automation execution environment image. The high level process to build an automation execution environment image is for Ansible Builder to read and validate your definition file, then create a Containerfile, and finally pass the Containerfile to Podman which then packages and creates your automation execution environment image. The definition file we will create for Ansible Builder is in yaml format and contains different sections which we will discuss in further detail.
The following is an example of a definition file:
Example 2.1. A definition file
For more information about these definition file parameters, please see this section.
2.3. Executing the build and creating commands
Prerequisites
- You have created a definition file
Procedure
To build an automation execution environment image, run:
ansible-builder build
$ ansible-builder build
By default, Ansible Builder will look for a definition file named execution-environment.yml but a different file path can be specified as an argument via the -f flag:
ansible-builder build -f definition-file-name.yml
$ ansible-builder build -f definition-file-name.ymlwhere definition-file-name specifies the name of your definition file.
2.4. Breakdown of definition file content
A definition file is necessary for building automation execution environments with Ansible Builder, as it specifies the content which will be included in the automation execution environment container image.
The following sections breaks down the different parts of a definition file.
2.4.1. Build args and base image
The build_arg_defaults section of the definition file is a dictionary whose keys can provide default values for arguments to Ansible Builder. See the following table for a list of values that can be used in build_arg_defaults:
| Value | Description |
|---|---|
|
|
|
|
| Specifies the parent image for the automation execution environment, enabling a new image to be built that is based off of an already-existing image |
|
| Specifies the image used for compiling-type tasks |
The values given inside build_arg_defaults will be hard-coded into the Containerfile, so these values will persist if podman build is called manually.
If the same variable is specified in the CLI --build-arg flag, the CLI value will take higher precedence.
2.4.2. Ansible config file path
When using an ansible.cfg file to pass a token and other settings for a private account to an automation hub server, list the config file path (relative to where the definition file is located) as a string to enable it as a build argument in the initial phase of the build.
The ansible.cfg file should be formatted like the following example:
Example 2.2. An ansible.cfg file
For more information on how to download a collection from automation hub, please see the related Ansible documentation page.
2.4.3. Dependencies
2.4.3.1. Galaxy
The galaxy entry points to a valid requirements file for the ansible-galaxy collection install -r … command.
The entry requirements.yml may be a relative path from the directory of the automation execution environment definition’s folder, or an absolute path.
The content of a requirements.yml file may look like the following:
Example 2.3. A requirements.yml file for Galaxy
--- collections: - geerlingguy.java - kubernetes.core
---
collections:
- geerlingguy.java
- kubernetes.core2.4.3.2. Python
The python entry in the definition file points to a valid requirements file for the pip install -r … command.
The entry requirements.txt is a file that installs extra Python requirements on top of what the Collections already list as their Python dependencies. It may be listed as a relative path from the directory of the automation execution environment definition’s folder, or an absolute path. The contents of a requirements.txt file should be formatted like the following example, similar to the standard output from a pip freeze command:
Example 2.4. A requirements.txt file for Python
2.4.3.3. System
The system entry in the definition points to a bindep requirements file, which will install system-level dependencies that are outside of what the collections already include as their dependencies. It may be listed as a relative path from the directory of the automation execution environment definition’s folder, or an absolute path.
To demonstrate this, the following is an example bindep.txt file that adds the libxml2 and subversion packages to a container:
Example 2.5. A bindep.txt file
libxml2-devel [platform:rpm] subversion [platform:rpm]
libxml2-devel [platform:rpm]
subversion [platform:rpm]2.4.4. Additional custom build steps
The prepend and append commands may be specified in the additional_build_steps section. These will add commands to the Containerfile which will run either before or after the main build steps are executed.
The syntax for additional_build_steps must be one of the following:
a multi-line string
Example 2.6. A multi-line string entry
RUN whoami RUN cat /etc/os-release
RUN whoami RUN cat /etc/os-releaseCopy to Clipboard Copied! Toggle word wrap Toggle overflow a list
Example 2.7. A list entry
- RUN echo This is a post-install command! - RUN ls -la /etc
- RUN echo This is a post-install command! - RUN ls -la /etcCopy to Clipboard Copied! Toggle word wrap Toggle overflow
2.5. Optional build command arguments
The -t flag will give your automation execution environment image a specific name. For example, the following command will build an image named my_first_ee_image:
ansible-builder build -t my_first_ee_image
$ ansible-builder build -t my_first_ee_image
If you have multiple definition files, you can specify which one to use by utilizing the -f flag:
ansible-builder build -f another-definition-file.yml -t another_ee_image
$ ansible-builder build -f another-definition-file.yml -t another_ee_image
In the example above, Ansible Builder will use the specifications provided in the file another-definition-file.yml instead of the default execution-environment.yml to build an automation execution environment image named another_ee_image.
For other specifications and flags that are possible to use with the build command, enter ansible-builder build --help to see a list of additional options.
2.6. Creating a Containerfile without building an image
To create a shareable Containerfile without building an image from it, run:
ansible-builder create
$ ansible-builder create
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}