Red Hat Summit이 콘텐츠는 선택한 언어로 제공되지 않습니다.
1.2. Per-Invocation Flags
Per-invocation flags can be used with data grids in Red Hat JBoss Data Grid to specify behavior for each cache call. Per-invocation flags facilitate the implementation of potentially time saving optimizations.
1.2.1. Per-Invocation Flag Functions
링크 복사링크가 클립보드에 복사되었습니다!
The
putForExternalRead() method in Red Hat JBoss Data Grid's Cache API uses flags internally. This method can load a JBoss Data Grid cache with data loaded from an external resource. To improve the efficiency of this call, JBoss Data Grid calls a normal put operation passing the following flags:
- The
ZERO_LOCK_ACQUISITION_TIMEOUTflag: JBoss Data Grid uses an almost zero lock acquisition time when loading data from an external source into a cache. - The
FAIL_SILENTLYflag: If the locks cannot be acquired, JBoss Data Grid fails silently without throwing any lock acquisition exceptions. - The
FORCE_ASYNCHRONOUSflag: If clustered, the cache replicates asynchronously, irrespective of the cache mode set. As a result, a response from other nodes is not required.
Combining the flags above significantly increases the efficiency of the operation. The basis for this efficiency is that
putForExternalRead calls of this type are used because the client can retrieve the required data from a persistent store if the data cannot be found in memory. If the client encounters a cache miss, it retries the operation.
For a detailed list of all flags available for JBoss Data Grid are available in the JBoss Data Grid API Documentation here: https://access.redhat.com/documentation/en-US/Red_Hat_JBoss_Data_Grid/6.4/html/API_Documentation/files/api/org/infinispan/context/Flag.html
1.2.2. Configure Per-Invocation Flags
링크 복사링크가 클립보드에 복사되었습니다!
To use per-invocation flags in Red Hat JBoss Data Grid, add the required flags to the advanced cache via the
withFlags() method call.
Example 1.1. Configuring Per-Invocation Flags
Cache cache = ...
cache.getAdvancedCache()
.withFlags(Flag.SKIP_CACHE_STORE, Flag.CACHE_MODE_LOCAL)
.put("local", "only");
Cache cache = ...
cache.getAdvancedCache()
.withFlags(Flag.SKIP_CACHE_STORE, Flag.CACHE_MODE_LOCAL)
.put("local", "only");Note
The called flags only remain active for the duration of the cache operation. To use the same flags in multiple invocations within the same transaction, use the
withFlags() method for each invocation. If the cache operation must be replicated onto another node, the flags are also carried over to the remote nodes.
1.2.3. Per-Invocation Flags Example
링크 복사링크가 클립보드에 복사되었습니다!
In a use case for Red Hat JBoss Data Grid, where a write operation, such as
put(), must not return the previous value, the IGNORE_RETURN_VALUES flag is used. This flag prevents a remote lookup (to get the previous value) in a distributed environment, which in turn prevents the retrieval of the undesired, potential, previous value. Additionally, if the cache is configured with a cache loader, this flag prevents the previous value from being loaded from its cache store.
Example 1.2. Using the IGNORE_RETURN_VALUES Flag
Cache cache = ...
cache.getAdvancedCache()
.withFlags(Flag.IGNORE_RETURN_VALUES)
.put("local", "only")
Cache cache = ...
cache.getAdvancedCache()
.withFlags(Flag.IGNORE_RETURN_VALUES)
.put("local", "only")
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}