1장. Overview of device mapper multipathing


DM Multipath provides redundancy through failover in active/passive configurations and improved performance by spreading I/O across multiple paths in active/active mode.

DM Multipath provides:

Redundancy

DM Multipath can provide failover in an active/passive configuration. In an active/passive configuration, only a subset of the paths is used at any time for I/O. If any element of an I/O path such as the cable, switch, or controller fails, DM Multipath switches to an alternate path. For more information, see:

  • multipath(8) and multipathd(8) man pages on your system
  • /etc/multipath.conf file
참고

The number of paths is dependent on the setup. Usually, DM Multipath setups have 2, 4, or 8 paths to the storage, but this is a common setup and other numbers are possible for the paths.

Improved Performance
DM Multipath can be configured in an active/active mode, where I/O is spread over the paths in a round-robin fashion. In some configurations, DM Multipath can detect loading on the I/O paths and dynamically rebalance the load.

1.1. Active/Passive multipath configuration with one RAID device

Active/passive configuration provides redundant I/O paths through dual HBAs and SAN switches to a single RAID device, enabling automatic failover when path components fail.

In this configuration, there are two Host Bus Adapters (HBAs) on the server, two SAN switches, and two RAID controllers. Following are the possible failure in this configuration:

  • HBA failure
  • Fibre Channel cable failure
  • SAN switch failure
  • Array controller port failure

With DM Multipath configured, a failure at any of these points causes DM Multipath to switch to the alternate I/O path. The following image describes the configuration with two I/O paths from the server to a RAID device. Here, there is one I/O path that goes through hba1, SAN1, and cntrlr1 and a second I/O path that goes through hba2, SAN2, and cntrlr2.

그림 1.1. Active/Passive multipath configuration with one RAID device

Active/Passive multipath configuration with one RAID device
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2026 Red Hat
맨 위로 이동