5.4.16.2. Converting a Linear Device to a RAID Device


You can convert an existing linear logical volume to a RAID device by using the --type argument of the lvconvert command.
The following command converts the linear logical volume my_lv in volume group my_vg to a 2-way RAID1 array.
# lvconvert --type raid1 -m 1 my_vg/my_lv
Copy to Clipboard Toggle word wrap
Since RAID logical volumes are composed of metadata and data subvolume pairs, when you convert a linear device to a RAID1 array, a new metadata subvolume is created and associated with the original logical volume on (one of) the same physical volumes that the linear volume is on. The additional images are added in metadata/data subvolume pairs. For example, if the original device is as follows:
# lvs -a -o name,copy_percent,devices my_vg
  LV     Copy%  Devices     
  my_lv         /dev/sde1(0)
Copy to Clipboard Toggle word wrap
After conversion to a 2-way RAID1 array the device contains the following data and metadata subvolume pairs:
# lvconvert --type raid1 -m 1 my_vg/my_lv
# lvs -a -o name,copy_percent,devices my_vg
  LV               Copy%  Devices                      
  my_lv            6.25   my_lv_rimage_0(0),my_lv_rimage_1(0)
  [my_lv_rimage_0]        /dev/sde1(0)                 
  [my_lv_rimage_1]        /dev/sdf1(1)                 
  [my_lv_rmeta_0]         /dev/sde1(256)               
  [my_lv_rmeta_1]         /dev/sdf1(0)
Copy to Clipboard Toggle word wrap
If the metadata image that pairs with the original logical volume cannot be placed on the same physical volume, the lvconvert will fail.
맨 위로 이동
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2025 Red Hat