Red Hat Summit이 콘텐츠는 선택한 언어로 제공되지 않습니다.
8.2. Queue Sizing
8.2.1. Controlling Queue Size
링크 복사링크가 클립보드에 복사되었습니다!
Controlling the size of queues is an important part of performance management in a messaging system.
When queues are created, you can specify a maximum queue size (
qpid.max_size) and maximum message count (qpid.max_count) for the queue.
qpid.max_size is specified in bytes. qpid.max_count is specified as the number of messages.
The following
qpid-config creates a queue with a maximum size in memory of 200MB, and a maximum number of 5000 messages:
qpid-config add queue my-queue --max-queue-size=204800000 --max-queue-count 5000
qpid-config add queue my-queue --max-queue-size=204800000 --max-queue-count 5000
In an application, the
qpid.max_count and qpid.max_size directives go inside the arguments of the x-declare of the node. For example, the following address will create the queue as the qpid-config command above:
- Python
tx = ssn.sender("my-queue; {create: always, node: {x-declare: {'auto-delete': True, arguments:{'qpid.max_count': 5000, 'qpid.max_size': 204800000}}}}")tx = ssn.sender("my-queue; {create: always, node: {x-declare: {'auto-delete': True, arguments:{'qpid.max_count': 5000, 'qpid.max_size': 204800000}}}}")Copy to Clipboard Copied! Toggle word wrap Toggle overflow
Note that the
qpid.max_count attribute will only be applied if the queue does not exist when this code is executed.
Behavior when limits are reached:
qpid.policy_type
The behavior when a queue reaches these limits is configurable. By default, on non-durable queues the behavior is reject: further attempts to send to the queue result in a TargetCapacityExceeded exception being thrown at the sender.
The configurable behavior is set using the
qpid.policy_type option. The possible values are:
- reject
- Message publishers throw an exception
TargetCapacityExceeded. This is the default behavior for non-durablequeues. - ring
- The oldest messages are removed to make room for newer messages.
The following example
qpid-config command sets the limit policy to ring:
qpid-config add queue my-queue --max-queue-size=204800 --max-queue-count 5000 --limit-policy ring
qpid-config add queue my-queue --max-queue-size=204800 --max-queue-count 5000 --limit-policy ring
The same thing is achieved in an application like so:
- Python
tx = ssn.sender("my-queue; {create: always, node: {x-declare: {'auto-delete': True, arguments:{'qpid.max_count': 5000, 'qpid.max_size': 204800, 'qpid.policy_type': 'ring'}}}}")tx = ssn.sender("my-queue; {create: always, node: {x-declare: {'auto-delete': True, arguments:{'qpid.max_count': 5000, 'qpid.max_size': 204800, 'qpid.policy_type': 'ring'}}}}")Copy to Clipboard Copied! Toggle word wrap Toggle overflow
See Also:
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}