Red Hat SummitFuse 6 is no longer supported
As of February 2025, Red Hat Fuse 6 is no longer supported. If you are using Fuse 6, please upgrade to Red Hat build of Apache Camel.이 콘텐츠는 선택한 언어로 제공되지 않습니다.
Chapter 12. Configuring the Hot Deployment System
Abstract
Standalone containers scan a directory for OSGi bundles and JBI artifacts to automatically load. You can change the location of this folder and the interval at which the folder is scanned.
Overview
링크 복사링크가 클립보드에 복사되었습니다!
Standalone containers will automatically load and deploy OSGi bundles and JBI artifacts from a pre-configured folder. It scans the folder once a second for new bundles or JBI artifacts. You can change the folder a container scans and the scan interval by editing properties in the
org.apache.felix.fileinstall-deploy PID.
Important
The hot deployment system is not not enabled for fabric containers.
Important
The hot deployment system works only while the Karaf container is running. In particular, deleting files from the hot deploy directory is not effective while the container is shut down.
Specifying the hot deployment folder
링크 복사링크가 클립보드에 복사되었습니다!
By default, a container scans the
deploy folder that is relative to the folder from which you launched the container. You change the folder the container monitors by setting the felix.fileinstall.dir property in the rg.apache.felix.fileinstall-deploy PID. The value is the absolute path of the folder to monitor. If you set the value to /home/joe/deploy, the container will monitor a folder in Joe's home directory.
Specifying the scan interval
링크 복사링크가 클립보드에 복사되었습니다!
By default containers scan the hot deployment folder every 1000 milliseconds. To change the interval between scans of the hot deployment folders, you change the felix.fileinstall.poll property in the
org.apache.felix.fileinstall-deploy PID. The value is specified in milliseconds.
Example
링크 복사링크가 클립보드에 복사되었습니다!
Example 12.1, “Configuring the Hot Deployment Folders” shows a configuration editing session that sets
/home/smx/jbideploy as the hot deployment folder and sets the scan interval to half a second.
Example 12.1. Configuring the Hot Deployment Folders
JBossFuse:karaf@root> config:edit org.apache.felix.fileinstall-deploy JBossFuse:karaf@root> config:propset felix.fileinstall.dir /home/smx/jbideploy JBossFuse:karaf@root> config:propset felix.fileinstall.poll 500 JBossFuse:karaf@root> config:update
JBossFuse:karaf@root> config:edit org.apache.felix.fileinstall-deploy
JBossFuse:karaf@root> config:propset felix.fileinstall.dir /home/smx/jbideploy
JBossFuse:karaf@root> config:propset felix.fileinstall.poll 500
JBossFuse:karaf@root> config:update
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}