이 콘텐츠는 선택한 언어로 제공되지 않습니다.

A.3. Setting up the Heketi Server

After deploying the containers and installing the templates, the system is now ready to load the Heketi topology file. Heketi provides a RESTful management interface which can be used to manage the lifecycle of Red Hat Gluster Storage volumes.

A sample, formatted topology file (topology-sample.json) is installed with the ‘heketi-templates’ package in the /usr/share/heketi/ directory.

{
    "clusters": [
               {
                  "nodes": [
                                {
                        "node": {
                            "hostnames": {
                                "manage": [
                                    "node1.example.com"
                                ],
                                "storage": [
                                    "192.168.121.168"
                                 ]
                             },
                             "zone": 1
                         },
                         "devices": [
                             "/dev/sdb",
                             "/dev/sdc",
                             "/dev/sdd",
                             "/dev/sde"
                         ]
               },...

{
    "clusters": [
               {
                  "nodes": [
                                {
                        "node": {
                            "hostnames": {
                                "manage": [
                                    "node1.example.com"
                                ],
                                "storage": [
                                    "192.168.121.168"
                                 ]
                             },
                             "zone": 1
                         },
                         "devices": [
                             "/dev/sdb",
                             "/dev/sdc",
                             "/dev/sdd",
                             "/dev/sde"
                         ]
               },...

Copy to Clipboard

Toggle word wrap

Edit the topology file based on the Red Hat Gluster Storage pod hostname under the node.hostnames.manage section and node.hostnames.storage section with the IP address. For simplicity, the /usr/share/heketi/topology-sample.json file only sets up 4 nodes with 8 drives each.

Important

Heketi stores its database on a Red Hat Gluster Storage volume. Heketi service does not respond if the volume is down.

To resolve this issue, restart the gluster pods hosting the Heketi volume.

Execute the following steps to set up the Heketi server:

Execute the following command to check if the bootstrap container is running:

curl http://deploy-heketi-<project_name>.<sub-domain_name>/hello

# curl http://deploy-heketi-<project_name>.<sub-domain_name>/hello

Copy to Clipboard

Toggle word wrap

For example:

curl http://deploy-heketi-storage-project.cloudapps.mystorage.com/hello

# curl http://deploy-heketi-storage-project.cloudapps.mystorage.com/hello

Hello from Heketi

Copy to Clipboard

Toggle word wrap

Execute the following command to load the topology file:

export  HEKETI_CLI_SERVER=http://deploy-heketi-<project_name>.<sub_domain_name>

# export  HEKETI_CLI_SERVER=http://deploy-heketi-<project_name>.<sub_domain_name>

Copy to Clipboard

Toggle word wrap

For example:

export HEKETI_CLI_SERVER=http://deploy-heketi-storage-project.cloudapps.mystorage.com

# export HEKETI_CLI_SERVER=http://deploy-heketi-storage-project.cloudapps.mystorage.com

Copy to Clipboard

Toggle word wrap

heketi-cli topology load --json=topology.json

# heketi-cli topology load --json=topology.json

Copy to Clipboard

Toggle word wrap

For example:

heketi-cli topology load --json=topology.json

# heketi-cli topology load --json=topology.json

 Creating node node1.example.com ... ID: 95cefa174c7210bd53072073c9c041a3
        Adding device /dev/sdb ... OK
        Adding device /dev/sdc ... OK
        Adding device /dev/sdd ... OK
        Adding device /dev/sde ... OK
    Creating node node2.example.com ... ID: f9920995e580f0fe56fa269d3f3f8428
        Adding device /dev/sdb ... OK
        Adding device /dev/sdc ... OK
        Adding device /dev/sdd ... OK
        Adding device /dev/sde ... OK
    Creating node node3.example.com ... ID: 73fe4aa89ba35c51de4a51ecbf52544d
        Adding device /dev/sdb ... OK
        Adding device /dev/sdc ... OK
        Adding device /dev/sdd ... OK
        Adding device /dev/sde ... OK

Copy to Clipboard

Toggle word wrap

Execute the following command to verify that the topology is loaded:
```
heketi-cli topology info
```
```
# heketi-cli topology info
```
Copy to Clipboard Toggle word wrap
Execute the following command to create the Heketi storage volume which will store the database on a reliable Red Hat Gluster Storage volume:
```
heketi-cli setup-openshift-heketi-storage
```
```
# heketi-cli setup-openshift-heketi-storage
```
Copy to Clipboard Toggle word wrap
For example:
```
heketi-cli setup-openshift-heketi-storage
```
```
# heketi-cli setup-openshift-heketi-storage

Saving heketi-storage.json
```
Copy to Clipboard Toggle word wrap
Note
If the Trusted Storage Pool where the heketidbstorage volume is created is down, then the Heketi service will not work. Hence, you must ensure that the Trusted Storage Pool is up before running heketi-cli.

Execute the following command to create a job which will copy the database from deploy-heketi bootstrap container to the volume.

oc create -f heketi-storage.json

# oc create -f heketi-storage.json

Copy to Clipboard

Toggle word wrap

For example:

oc create -f heketi-storage.json

# oc create -f heketi-storage.json

secret "heketi-storage-secret" created
endpoints "heketi-storage-endpoints" created
service "heketi-storage-endpoints" created
job "heketi-storage-copy-job" created

Copy to Clipboard

Toggle word wrap

Execute the following command to verify that the job has finished successfully:
```
oc get jobs
```
```
# oc get jobs
```
Copy to Clipboard Toggle word wrap
For example:
```
oc get jobs
```
```
# oc get jobs
NAME                      DESIRED   SUCCESSFUL   AGE
heketi-storage-copy-job   1            1               2m
```
Copy to Clipboard Toggle word wrap

Execute the following command to remove all resources used to bootstrap heketi:

oc delete all,job,template,secret --selector="deploy-heketi"

# oc delete all,job,template,secret --selector="deploy-heketi"

Copy to Clipboard

Toggle word wrap

For example:

oc delete all,job,template,secret --selector="deploy-heketi"

# oc delete all,job,template,secret --selector="deploy-heketi"

deploymentconfig "deploy-heketi" deleted
route "deploy-heketi" deleted
service "deploy-heketi" deleted
pod "deploy-heketi-1-4k1fh" deleted
job "heketi-storage-copy-job" deleted
template "deploy-heketi" deleted

Copy to Clipboard

Toggle word wrap

Execute the following command to deploy the Heketi service which will be used to create persistent volumes for OpenShift:

oc process heketi -v \
    HEKETI_KUBE_NAMESPACE=<Project name> \
    HEKETI_KUBE_APIHOST='<OpenShift master endpoint address>' \
    HEKETI_KUBE_INSECURE=y \
    HEKETI_KUBE_SECRETNAME=<heketi-service-account secret> | oc create -f -

# oc process heketi -v \
    HEKETI_KUBE_NAMESPACE=<Project name> \
    HEKETI_KUBE_APIHOST='<OpenShift master endpoint address>' \
    HEKETI_KUBE_INSECURE=y \
    HEKETI_KUBE_SECRETNAME=<heketi-service-account secret> | oc create -f -

Copy to Clipboard

Toggle word wrap

For example:

oc process heketi -v \
    HEKETI_KUBE_NAMESPACE=storage-project \
    HEKETI_KUBE_APIHOST='https://master.example.com:8443' \
    HEKETI_KUBE_INSECURE=y \
    HEKETI_KUBE_SECRETNAME=<secret from step 4 example> | oc create -f -


service "heketi" created
route "heketi" created
deploymentconfig "heketi" created

oc process heketi -v \
    HEKETI_KUBE_NAMESPACE=storage-project \
    HEKETI_KUBE_APIHOST='https://master.example.com:8443' \
    HEKETI_KUBE_INSECURE=y \
    HEKETI_KUBE_SECRETNAME=<secret from step 4 example> | oc create -f -


service "heketi" created
route "heketi" created
deploymentconfig "heketi" created

Copy to Clipboard

Toggle word wrap

Execute the following command to let the client communicate with the container:

export  HEKETI_CLI_SERVER=http://heketi-<project_name>.<sub_domain_name>

# export  HEKETI_CLI_SERVER=http://heketi-<project_name>.<sub_domain_name>

Copy to Clipboard

Toggle word wrap

For example:

export  HEKETI_CLI_SERVER=http://heketi-storage-project.cloudapps.mystorage.com

# export  HEKETI_CLI_SERVER=http://heketi-storage-project.cloudapps.mystorage.com

Copy to Clipboard

Toggle word wrap

heketi-cli topology info

# heketi-cli topology info

Copy to Clipboard

Toggle word wrap

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

A.3. Setting up the Heketi Server

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat 소개

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links