Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

2.6. Subscribing to the Red Hat Gluster Storage Server Channels

After you have successfully installed Red Hat Gluster Storage, you must subscribe to the required channels:

Note

If you used Red Hat Satellite or Layered Installation method to install Red Hat Gluster Storage 3.0, then you can skip the steps mentioned in this chapter. For more information regarding layered installation, see Section 2.3, “Installing Red Hat Gluster Storage Server on Red Hat Enterprise Linux (Layered Install)”
Using Subscription Manager

  1. Register the System with Subscription Manager

    Run the following command and enter your Red Hat Network user name and password to register the system with Subscription Manager: 
    # subscription-manager register
    Copy to Clipboard Toggle word wrap

  2. Identify Available Entitlement Pools

    Run the following commands to find entitlement pools containing the repositories required to install Red Hat Gluster Storage: 
    # subscription-manager list --available | grep -A8 "Red Hat Enterprise Linux Server"
# subscription-manager list --available | grep -A8 "Red Hat Storage"
    Copy to Clipboard Toggle word wrap

  3. Attach Entitlement Pools to the System

    Use the pool identifiers located in the previous step to attach the Red Hat Enterprise Linux Server and Red Hat Gluster Storage entitlements to the system. Run the following command to attach the entitlements: 
    # subscription-manager attach --pool=[POOLID]
    Copy to Clipboard Toggle word wrap
    For example: 
    # subscription-manager attach --pool=8a85f9814999f69101499c05aa706e47
    Copy to Clipboard Toggle word wrap

  4. Enable the Required Channels for Red Hat Gluster Storage on Red Hat Enterprise Linux

    For Red Hat Gluster Storage 3.4 on Red Hat Enterprise Linux 6.7 and later

    1. Run the following commands to enable the repositories required to install Red Hat Gluster Storage: 
      # subscription-manager repos --enable=rhel-6-server-rpms
# subscription-manager repos --enable=rhel-scalefs-for-rhel-6-server-rpms
# subscription-manager repos --enable=rhs-3-for-rhel-6-server-rpms
      Copy to Clipboard Toggle word wrap
    2. For Red Hat Gluster Storage 3.0.4 or later, if you require Samba, then enable the following repository: 
      # subscription-manager repos --enable=rh-gluster-3-samba-for-rhel-6-server-rpms
      Copy to Clipboard Toggle word wrap
    3. NFS-Ganesha is not supported on Red Hat Enterprise Linux 6 based installations.
    For Red Hat Gluster Storage 3.4 on Red Hat Enterprise Linux 7.5

    1. Run the following commands to enable the repositories required to install Red Hat Gluster Storage 
      # subscription-manager repos --enable=rhel-7-server-rpms
# subscription-manager repos --enable=rh-gluster-3-for-rhel-7-server-rpms
      Copy to Clipboard Toggle word wrap
    2. For Red Hat Gluster Storage 3.0.4 or later, if you require Samba, then enable the following repository: 
      # subscription-manager repos --enable=rh-gluster-3-samba-for-rhel-7-server-rpms
      Copy to Clipboard Toggle word wrap
    3. For Red Hat Gluster Storage 3.4, if NFS-Ganesha is required, then enable the following repository: 
      # subscription-manager repos --enable=rh-gluster-3-nfs-for-rhel-7-server-rpms --enable=rhel-ha-for-rhel-7-server-rpms
      Copy to Clipboard Toggle word wrap
    4. For Red Hat Gluster Storage 3.4, if you require CTDB, then enable the following repository: 
      # subscription-manager repos --enable=rh-gluster-3-samba-for-rhel-7-server-rpms
      Copy to Clipboard Toggle word wrap

  5. Verify if the Channels are Enabled

    Run the following command to verify if the channels are enabled: 
    # yum repolist
    Copy to Clipboard Toggle word wrap
Using Red Hat Satellite Server

  1. Configure the Client System to Access Red Hat Satellite

    Configure the client system to access Red Hat Satellite. Refer section Registering Clients with Red Hat Satellite Server in Red Hat Satellite 5.6 Client Configuration Guide.

  2. Register to the Red Hat Satellite Server

    Run the following command to register the system to the Red Hat Satellite Server: 
    # rhn_register
    Copy to Clipboard Toggle word wrap

  3. Register to the Standard Base Channel

    In the select operating system release page, select All available updates and follow the prompts to register the system to the standard base channel for RHEL 6 - rhel-x86_64-server-6. The standard base channel for RHEL 7 is RHEL7-rhel-x86_64-server-7

  4. Subscribe to the Required Red Hat Gluster Storage Server Channels

    For Red Hat Gluster Storage 3.4 on Red Hat Enterprise Linux 6.7 and later

    1. Run the following command to subscribe the system to the required Red Hat Gluster Storage server channel: 
      # rhn-channel --add --channel rhel-x86_64-server-6-rhs-3 --channel rhel-x86_64-server-sfs-6
      Copy to Clipboard Toggle word wrap
    2. For Red Hat Gluster Storage 3.0.4 or later, if you require Samba, then execute the following command to enable the required channel: 
      # rhn-channel --add --channel rhel-x86_64-server-6-rh-gluster-3-samba
      Copy to Clipboard Toggle word wrap
    3. NFS-Ganesha is not supported on Red Hat Enterprise Linux 6 based installations.
    For Red Hat Gluster Storage 3.4 on Red Hat Enterprise Linux 7.5

    1. Run the following command to subscribe the system to the required Red Hat Gluster Storage server channels for RHEL 7: 
      # rhn-channel --add --channel rhel-x86_64-server-7-rh-gluster-3
      Copy to Clipboard Toggle word wrap
    2. For Red Hat Gluster Storage 3.0.4 or later, if you require Samba, then execute the following command to enable the required channel: 
      # rhn-channel --add --channel rhel-x86_64-server-7-rh-gluster-3-samba
      Copy to Clipboard Toggle word wrap
    3. For Red Hat Gluster Storage 3.4, for NFS-Ganesha enable the following channel: 
      # rhn-channel --add --channel rhel-x86_64-server-7-rh-gluster-3-nfs --channel rhel-x86_64-server-ha-7
      Copy to Clipboard Toggle word wrap
    4. For Red Hat Gluster Storage 3.4, if CTDB is required, then enable the following channel: 
      # rhn-channel --add --channel rhel-x86_64-server-7-rh-gluster-3-samba
      Copy to Clipboard Toggle word wrap

  5. Verify if the System is Registered Successfully

    Run the following command to verify if the system is registered successfully: 
    # rhn-channel --list
rhel-x86_64-server-7
rhel-x86_64-server-7-rh-gluster-3
    Copy to Clipboard Toggle word wrap
맨 위로 이동
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2025 Red Hat