이 콘텐츠는 선택한 언어로 제공되지 않습니다.

12.4. Configuring the Log Level

Every log message has a log level associated with it. The levels, in descending order, are CRITICAL, ERROR, WARNING, INFO, DEBUG, and TRACE. Red Hat Gluster Storage can be configured to generate log messages only for certain log levels. Only those messages that have log levels above or equal to the configured log level are logged.

For example, if the log level is set to INFO, only CRITICAL, ERROR, WARNING, and INFO messages are logged.

The components can be configured to log at one of the following levels:

CRITICAL
ERROR
WARNING
INFO
DEBUG
TRACE

Important

Setting the log level to TRACE or DEBUG generates a very large number of log messages and can lead to disks running out of space very quickly.

To configure the log level on bricks

# gluster volume set VOLNAME diagnostics.brick-log-level <value>

Example 12.7. Set the log level to warning on a brick

# gluster volume set testvol diagnostics.brick-log-level WARNING

To configure the syslog level on bricks

# gluster volume set VOLNAME diagnostics.brick-sys-log-level <value>

Example 12.8. Set the syslog level to warning on a brick

# gluster volume set testvol diagnostics.brick-sys-log-level WARNING

To configure the log level on clients

# gluster volume set VOLNAME diagnostics.client-log-level <value>

Example 12.9. Set the log level to error on a client

# gluster volume set testvol diagnostics.client-log-level ERROR

To configure the syslog level on clients

# gluster volume set VOLNAME diagnostics.client-sys-log-level <value>

Example 12.10. Set the syslog level to error on a client

# gluster volume set testvol diagnostics.client-sys-log-level ERROR

To configure the log level for glusterd persistently

Edit the /etc/sysconfig/glusterd file, and set the value of the LOG_LEVEL parameter to the log level that you want glusterd to use.

## Set custom log file and log level (below are defaults)
#LOG_FILE='/var/log/glusterfs/glusterd.log'
LOG_LEVEL='VALUE'

This change does not take effect until glusterd is started or restarted with the service or systemctl command.

Example 12.11. Set the log level to WARNING on glusterd

Run the following commands to set the log level to WARNING:

Edit the glusterd service file:
On Red Hat Enterprise 7(RHEL 7) and RHEL 8, the glusterd service file is available at /usr/lib/systemd/system/glusterd.service
On RHEL 6, the glusterd service file is available at /etc/sysconfig/glusterd
Important
Red Hat Gluster Storage is not supported on Red Hat Enterprise Linux 6 (RHEL 6) from 3.5 Batch Update 1 onwards. See Version Details table in section Red Hat Gluster Storage Software Components and Versions of the Installation Guide

Change the LOG_LEVEL variable to the required debug level.

## Set custom log file and log level (below are defaults)
                 #LOG_FILE='/var/log/glusterfs/glusterd.log'
                 LOG_LEVEL='WARNING'

Reload the daemon:
On RHEL 7 and RHEL 8, run
```
systemctl daemon-reload
```
On RHEL 6, run
```
service glusterd reload
```
Important
Red Hat Gluster Storage is not supported on Red Hat Enterprise Linux 6 (RHEL 6) from 3.5 Batch Update 1 onwards. See Version Details table in section Red Hat Gluster Storage Software Components and Versions of the Installation Guide
Restart the glusterd service.
On RHEL 7 and RHEL 8, run
```
systemctl restart glusterd
```
On RHEL 6, run
```
service glusterd restart
```
Important
Red Hat Gluster Storage is not supported on Red Hat Enterprise Linux 6 (RHEL 6) from 3.5 Batch Update 1 onwards. See Version Details table in section Red Hat Gluster Storage Software Components and Versions of the Installation Guide

Example 12.12. Run volume status with a log level of ERROR

# gluster --log-level=ERROR volume status

See Also:

Section 11.1, “Configuring Volume Options”

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

12.4. Configuring the Log Level

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat 소개

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links