Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Chapter 13. FAB Tutorial

Abstract

This tutorial describes a complete example of how to generate, build, run, and deploy a Apache Camel application as a FAB.

13.1. Generating and Running an EIP FAB
링크 복사

Overview
링크 복사

This section explains how to generate, build, and run a complete Apache Camel example as a FAB, where the starting point code is generated with the help of a Maven archetype.

Prerequisites
링크 복사

In order to generate a project using an Red Hat JBoss Fuse Maven archetype, you must have the following prerequisites:
  • Maven installation—Maven is a free, open source build tool from Apache. You can download the latest version from http://maven.apache.org/download.html (minimum is 2.0.9).
  • Internet connection—whilst performing a build, Maven dynamically searches external repositories and downloads the required artifacts on the fly. In order for this to work, your build machine must be connected to the Internet.
  • fusesource Maven repository is configured—in order to locate the archetypes, Maven's settings.xml file must be configured with the location of the fusesource Maven repository. For details of how to set this up, see the section called “Adding the Red Hat JBoss Fuse repository”.

Generating an EIP FAB
링크 복사

The camel-archetype-blueprint archetype creates a sample Maven project that can be deployed as a FAB. To generate a Maven project with the coordinates, org.fusesource.example:camel-fab, enter the following command: 
mvn archetype:generate
-DarchetypeGroupId=org.apache.camel.archetypes
-DarchetypeArtifactId=camel-archetype-blueprint
-DarchetypeVersion=2.12.0.redhat-610379
-DgroupId=org.fusesource.example
-DartifactId=camel-fab
The result of this command is a directory, ProjectDir/camel-fab, containing the files for the generated FAB project.

Modify the POM file
링크 복사

By default, the generated project's POM is configured as an OSGi bundle, not a FAB. To convert the camel-fab/pom.xml file to a FAB POM, modify it as follows:
  1. Open the camel-fab/pom.xml file with your favorite text editor and change the packaging type from bundle to jar, as follows: 
      <groupId>org.fusesource.example</groupId>
  <artifactId>camel-fab</artifactId>
  <packaging>jar</packaging>
  <version>1.0-SNAPSHOT</version>
  2. Add the provided scope to all of the dependencies (except for the dependencies that are already marked with test scope). Scroll down to the dependencies element and add a scope element to each of the dependencies as shown: 
      ...
  <dependencies>
    <dependency>
      <groupId>org.apache.camel</groupId>
      <artifactId>camel-core</artifactId>
      <version>2.12.0.redhat-610346</version>
 <scope>provided</scope>
    </dependency>
    <dependency>
      <groupId>org.apache.camel</groupId>
      <artifactId>camel-blueprint</artifactId>
      <version>2.12.0.redhat-610346</version>
 <scope>provided</scope>
    </dependency>
    ...
  3. Remove the Maven bundle plug-in configuration. Scroll down to the plugins section and remove the complete plugin element corresponding to the maven-bundle-plugin plugin.
  4. Save and close the camel-fab/pom.xml file.

Running the EIP FAB
링크 복사

To install and run the generated camel-fab project, perform the following steps:
  1. Build the project—open a command prompt and change directory to ProjectDir/camel-fab. Use Maven to build the demonstration by entering the following command: 
    mvn install
    If this command runs successfully, the ProjectDir/camel-fab/target directory should contain the JAR file, camel-fab-1.0-SNAPSHOT.jar and the JAR will also be installed in the local Maven repository.
  2. Install the fabric-bundle feature—the fabric-bundle feature is a prerequisite for using FABs. If it is not already installed, enter the following command: 
    JBossFuse:karaf@root> features:install fabric-bundle
  3. Install and start the camel-fab JAR—at the Red Hat JBoss Fuse console, enter the following command: 
    JBossFuse:karaf@root> install fab:mvn:org.fusesource.example/camel-fab
    Note
    It can take a minute or so for the install command to finish, because the FAB runtime needs some time to evaluate the tree of dependencies associated with the camel-fab artifact.
    If the FAB is successfully installed, its bundle ID is logged to the console window. Using this bundle ID, bundleID, start the FAB by entering the following console command: 
    JBossFuse:karaf@root> fab:start bundleID
  4. View the log—After entering the fab:start command, the Camel route starts to log messages to the container's log. To view the log, enter the following command: 
    JBossFuse:karaf@root> log:tail -n 10
    You should see messages like the following: 
    2014-02-24 10:53:02,175 | INFO  | #0 - timer://foo | timerToLog
| rg.apache.camel.util.CamelLogger  176 | 136
- org.apache.camel.camel-core - 2.12.0.redhat-610349
| The message contains Hi from Camel at 2014-02-24 10:53:02
2014-02-24 10:53:07,175 | INFO  | #0 - timer://foo | timerToLog
| rg.apache.camel.util.CamelLogger  176 | 136
- org.apache.camel.camel-core - 2.12.0.redhat-610349
| The message contains Hi from Camel at 2014-02-24 10:53:07
    To exit the log, type Ctrl-C.
  5. Stop the camel-fab bundle—using the FAB's bundle ID, bundleID, stop the camel-fab bundle, as follows: 
    JBossFuse:karaf@root> fab:stop bundleID
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

Legal Notice

Theme

© 2026 Red Hat맨 위로 이동