이 콘텐츠는 선택한 언어로 제공되지 않습니다.
Chapter 9. Monitoring a high availability Red Hat Ceph Storage cluster
When you deploy an overcloud with Red Hat Ceph Storage, Red Hat OpenStack Platform uses the ceph-mon
monitor daemon to manage the Ceph cluster. Director deploys the daemon on all Controller nodes.
View the status of the Ceph Monitoring service
On a Controller node, run the service ceph status
command to check that the Ceph Monitoring service is running:
sudo service ceph status
$ sudo service ceph status
=== mon.overcloud-controller-0 ===
mon.overcloud-controller-0: running {"version":"0.94.1"}
View Ceph Monitoring configuration
On a Controller nodes or on a Ceph node, open the /etc/ceph/ceph.conf
file to view the monitoring configuration parameters:
This example shows the following information:
- All three Controller nodes are configured to monitor the Red Hat Ceph Storage cluster with the mon_initial_members parameter.
- The 172.19.0.11/24 network is configured to provide a communication path between the Controller nodes and the Red Hat Ceph Storage nodes.
- The Red Hat Ceph Storage nodes are assigned to a separate network from the Controller nodes, and the IP addresses for the monitoring Controller nodes are 172.18.0.15, 172.18.0.16, and 172.18.0.17.
View individual Ceph node status
Log in to the Ceph node and run the ceph -s
command:
This example output shows that the health parameter value is HEALTH_OK, which indicates that the Ceph node is active and healthy. The output also shows three Ceph monitor services that are running on the three overcloud-controller nodes and the IP addresses and ports of the services.
For more information about Red Hat Ceph Storage, see the Red Hat Ceph product page.