Red Hat Summit이 콘텐츠는 선택한 언어로 제공되지 않습니다.
3.10. iSCSI interface and offload support in Compute
Note
iSCSI interface and offload support is only present since Kilo.
Compute supports open-iscsi iSCSI interfaces for offload cards. Offload hardware must be present and configured on every compute node where offload is desired. Once an open-iscsi interface is configured, the iface name (
iface.iscsi_ifacename) should be passed to libvirt via the iscsi_iface parameter for use. All iscsi sessions will be bound to this iSCSI interface.
Currently supported transports (iface.transport_name) are
be2iscsi, bnx2i, cxgb3i, cxgb4i, qla4xxx, ocs
. No configuration changes are needed outside of Compute node.
iSER is currently supported via the separate iSER LibvirtISERVolumeDriver and will be rejected if used via the
iscsi_iface parameter.
3.10.1. iSCSI iface configuration
- Note the distinction between the transport name (
iface.transport_name) and iface name (iface.iscsi_ifacename). The actual iface name must be specified via theiscsi_ifaceparameter to libvirt for offload to work. - The default name for an iscsi iface (open-iscsi parameter
iface.iscsi_ifacename) is in the format transport_name.hwaddress when generated by iscsiadm. - iscsiadm can be used to view and generate current iface configuration. Every network interface that supports an open-iscsi transport can have one or more iscsi ifaces associated with it. If no ifaces have been configured for a network interface supported by an open-iscsi transport, this command will create a default iface configuration for that network interface. For example :
#iscsiadm -m ifacedefault tcp,<empty>,<empty>,<empty>,<empty> iser iser,<empty>,<empty>,<empty>,<empty> bnx2i.00:05:b5:d2:a0:c2 bnx2i,00:05:b5:d2:a0:c2,5.10.10.20,<empty>,<empty> cxgb4i.00:07:43:28:b2:58 cxgb4i,00:07:43:28:b2:58,102.50.50.80,<empty>,<empty> qla4xxx.00:c0:dd:08:63:ea qla4xxx,00:c0:dd:08:63:ea,20.15.0.9,<empty>,<empty>The output is in the format : iface_name transport_name,hwaddress,ipaddress,net_ifacename,initiatorname. - Individual iface configuration can be viewed via
#iscsiadm -m iface -I IFACE_NAME# BEGIN RECORD 2.0-873 iface.iscsi_ifacename = cxgb4i.00:07:43:28:b2:58 iface.net_ifacename = <empty> iface.ipaddress = 102.50.50.80 iface.hwaddress = 00:07:43:28:b2:58 iface.transport_name = cxgb4i iface.initiatorname = <empty> # END RECORDConfiguration can be updated as desired via#iscsiadm -m iface-I IFACE_NAME--op=update -n iface.SETTING -v VALUE - All iface configurations need a minimum of
iface.iface_name,iface.transport_nameandiface.hwaddressto be correctly configured to work. Some transports may requireiface.ipaddressandiface.net_ifacenameas well to bind correctly.Detailed configuration instructions can be found in the Linux* Open-iSCSI README file .
