Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

3.2. Virtual Machine Network Quality of Service

Virtual machine network quality of service is a feature that allows you to create profiles for limiting both the inbound and outbound traffic of individual virtual network interface controllers. With this feature, you can limit bandwidth in a number of layers, controlling the consumption of network resources.

3.2.1. Creating a Virtual Machine Network Quality of Service Entry
링크 복사

Create a virtual machine network quality of service entry to regulate network traffic when applied to a virtual network interface controller (vNIC) profile, also known as a virtual machine network interface profile.

Creating a Virtual Machine Network Quality of Service Entry

  1. Click Compute Data Centers.
  2. Click a data center’s name to open the details view.
  3. Click the QoS tab.
  4. Under VM Network, click New.
  5. Enter a Name for the virtual machine network quality of service entry.
  6. Enter the limits for the Inbound and Outbound network traffic.
  7. Click OK.

You have created a virtual machine network quality of service entry that can be used in a virtual network interface controller.

Virtual machine network quality of service settings allow you to configure bandwidth limits for both inbound and outbound traffic on three distinct levels.

Expand
Table 3.1. Virtual Machine Network QoS Settings
Field NameDescription

Data Center

The data center to which the virtual machine network QoS policy is to be added. This field is configured automatically according to the selected data center.

Name

A name to represent the virtual machine network QoS policy within the Manager.

Inbound

The settings to be applied to inbound traffic. Select or clear the Inbound check box to enable or disable these settings.

  • Average: The average speed of inbound traffic.
  • Peak: The speed of inbound traffic during peak times.
  • Burst: The speed of inbound traffic during bursts.

Outbound

The settings to be applied to outbound traffic. Select or clear the Outbound check box to enable or disable these settings.

  • Average: The average speed of outbound traffic.
  • Peak: The speed of outbound traffic during peak times.
  • Burst: The speed of outbound traffic during bursts.

To change the maximum value allowed by the Average, Peak, or Burst fields, use the engine-config command to change the value of the MaxAverageNetworkQoSValue, MaxPeakNetworkQoSValue, or MaxBurstNetworkQoSValue configuration keys. You must restart the ovirt-engine service for any changes to take effect. For example: 

# engine-config -s MaxAverageNetworkQoSValue=2048
# systemctl restart ovirt-engine

3.2.3. Removing a Virtual Machine Network Quality of Service Entry
링크 복사

Remove an existing virtual machine network quality of service entry.

Removing a Virtual Machine Network Quality of Service Entry

  1. Click Compute Data Centers.
  2. Click a data center’s name to open the details view.
  3. Click the QoS tab.
  4. Under VM Network, select a virtual machine network quality of service entry and click Remove.
  5. Click OK.
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2026 Red Hat맨 위로 이동