Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

12.8. Importing a Block Storage Domain

12.8.1. Importing a Block Storage Domain
링크 복사

An existing block storage domain with type set to iscsi or fcp can be imported to the engine using the REST API. The ability to import storage domains allows you to recover data in the event of a failure in the engine database, and to migrate data from one data center or environment to another.
This procedure assumes the storage domain is not attached to a data center or host in any environment. To import and attach an existing block storage domain to a data center, the target data center must be initialized.

Procedure 12.1. Importing a block storage domain

  1. Discover the targets on your iSCSI storage server: 
    POST /ovirt-engine/api/hosts/052a880a-53e0-4fe3-9ed5-01f939d1df66/iscsidiscover
Accept: application/xml
Content-Type: application/xml

<action>
    <iscsi>
        <address>192.0.2.0</address>
        <port>3260</port>
    </iscsi>
</action>
  2. Get a list of storage domains that are candidates to be imported, using the iSCSI targets discovered in the previous step: 
    POST /ovirt-engine/api/hosts/052a880a-53e0-4fe3-9ed5-01f939d1df66/unregisteredstoragedomainsdiscover HTTP/1.1
Accept: application/xml
Content-type: application/xml

<action>
    <iscsi>
        <address>192.0.2.0</address>
    </iscsi>
    <iscsi_target>iqn.name1.120.01</iscsi_target>
    <iscsi_target>iqn.name2.120.02</iscsi_target>
    <iscsi_target>iqn.name3.120.03</iscsi_target>
</action>
    The response shows a list of storage domains not associated with a host, similar to the following: 
    <action>
    <iscsi>
        <address>192.0.2.0</address>
    </iscsi>
    <storage_domains>
        <storage_domain id="6ab65b16-0f03-4b93-85a7-5bc3b8d52be0">
            <name>scsi4</name>
            <type>data</type>
            <external_status>
              <state>ok</state>
            </external_status>
            <master>false</master>
            <storage>
                <type>iscsi</type>
                <volume_group id="OLkKwa-VmEM-abW7-hPiv-BGrw-sQ2E-vTdAy1"/>
            </storage>
            <available>0</available>
            <used>0</used>
            <committed>0</committed>
            <storage_format>v3</storage_format>
        </storage_domain>
    <status>
        <state>complete</state>
    </status>
    <iscsi_target>iqn.name1.120.01</iscsi_target>
    <iscsi_target>iqn.name2.120.02</iscsi_target>
    <iscsi_target>iqn.name3.120.03</iscsi_target>
</action>
  3. Import the iSCSI storage domains to the host: 
    POST /ovirt-engine/api/storagedomains/ HTTP/1.1
  Accept: application/xml
  Content-type: application/xml

<storage_domain id="6ab65b16-0f03-4b93-85a7-5bc3b8d52be0">
    <import>true</import>
    <host id="052a880a-53e0-4fe3-9ed5-01f939d1df66" />
    <type>data</type>
    <storage>
        <type>iscsi</type>
    </storage>
</storage_domain>
You have now imported the block storage domain to your host.
You may now wish to attach the storage domain to the host, and find any unregistered disks. Attach the storage domain and associated disks with the following steps:

Procedure 12.2. Attaching a block storage domain

  1. Attach the storage domain to your data center: 
    POST /ovirt-engine/api/datacenters/01a45ff0-915a-45e0-8d56-5253234ac988/storagedomains
Accept: application/xml
Content-Type: application/xml

<storage_domain>
    <name>scsi4</name>
</storage_domain>
  2. Find the unregistered disks on the storage domain: 
    GET /ovirt-engine/api/storagedomains/6ab65b16-0f03-4b93-85a7-5bc3b8d52be0/disks;unregistered
Accept: application/xml
Content-Type: application/xml
    This will return information about any unregistered disks on the storage domain, with a response similar to: 
    <disk href= "/ovirt-engine/api/storagedomains/6ab65b16-0f03-4b93-85a7-5bc3b8d52be0/disks/b662f6da-3e97-4bb6-8a50-bda9980a6e83" id="b662f6da-3e97-4bb6-8a50-bda9980a6e83">
  <actions>
      <link href= "/ovirt-engine/api/storagedomains/6ab65b16-0f03-4b93-85a7-5bc3b8d52be0/disks/b662f6da-3e97-4bb6-8a50-bda9980a6e83/export" rel="export"/>
  </actions>
  <name>disk1</name>
  <description/>
  <link href= "/ovirt-engine/api/storagedomains/6ab65b16-0f03-4b93-85a7-5bc3b8d52be0/disks/b662f6da-3e97-4bb6-8a50-bda9980a6e83/permissions" rel="permissions"/>
  <link href= "/ovirt-engine/api/storagedomains/6ab65b16-0f03-4b93-85a7-5bc3b8d52be0/disks/b662f6da-3e97-4bb6-8a50-bda9980a6e83/statistics" rel="statistics"/>
  <alias>disk1</alias>
  <image_id>930d653e-2a11-45ce-8042-9935584a3f87</image_id>
  <storage_domain href= "/ovirt-engine/api/storagedomains/6ab65b16-0f03-4b93-85a7-5bc3b8d52be0" id="8ac10ec5-7cc9-4b1c-9c97-f121a9e4679a"/>
  <storage_domains>
      <storage_domain id="6ab65b16-0f03-4b93-85a7-5bc3b8d52be0"/>
  </storage_domains>
  <size>10737418240</size>
  <provisioned_size>10737418240</provisioned_size>
  <actual_size>10737418240</actual_size>
  <status>
      <state>ok</state>
  </status>
  <interface>ide</interface>
  <format>raw</format>
  <sparse>false</sparse>
  <bootable>false</bootable>
  <shareable>false</shareable>
  <wipe_after_delete>false</wipe_after_delete>
  <propagate_errors>false</propagate_errors>
  <storage_type>image</storage_type>
</disk>
  3. Attach the disk to the storage domain: 
    POST /ovirt-engine/api/storagedomains/6ab65b16-0f03-4b93-85a7-5bc3b8d52be0/disks;unregistered
Accept: application/xml
Content-Type: application/xml

<disk id='b662f6da-3e97-4bb6-8a50-bda9980a6e83'></disk>
The disk is now attached to the imported block storage domain.
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2026 Red Hat맨 위로 이동