Chapter 13. FlowCollector API reference

agent

object

Agent configuration for flows extraction.

consolePlugin

object

consolePlugin defines the settings related to the OpenShift Container Platform Console plugin, when available.

deploymentModel

string

deploymentModel defines the desired type of deployment for flow processing. Possible values are:

- Direct (default) to make the flow processor listen directly from the agents.

- Kafka to make flows sent to a Kafka pipeline before consumption by the processor.

Kafka can provide better scalability, resiliency, and high availability (for more details, see https://www.redhat.com/en/topics/integration/what-is-apache-kafka).

exporters

array

exporters defines additional optional exporters for custom consumption or storage.

kafka

object

Kafka configuration, allowing to use Kafka as a broker as part of the flow collection pipeline. Available when the spec.deploymentModel is Kafka.

loki

object

loki, the flow store, client settings.

namespace

string

Namespace where Network Observability pods are deployed.

networkPolicy

object

networkPolicy defines ingress network policy settings for Network Observability components isolation.

processor

object

processor defines the settings of the component that receives the flows from the agent, enriches them, generates metrics, and forwards them to the Loki persistence layer and/or any available exporter.

prometheus

object

prometheus defines Prometheus settings, such as querier configuration used to fetch metrics from the Console plugin.

ebpf

object

ebpf describes the settings related to the eBPF-based flow reporter when spec.agent.type is set to eBPF.

type

string

type [deprecated *] selects the flows tracing agent. Previously, this field allowed to select between eBPF or IPFIX. Only eBPF is allowed now, so this field is deprecated and is planned for removal in a future version of the API.

advanced

object

advanced allows setting some aspects of the internal configuration of the eBPF agent. This section is aimed mostly for debugging and fine-grained performance optimizations, such as GOGC and GOMAXPROCS env vars. Set these values at your own risk.

cacheActiveTimeout

string

cacheActiveTimeout is the max period during which the reporter aggregates flows before sending. Increasing cacheMaxFlows and cacheActiveTimeout can decrease the network traffic overhead and the CPU load, however you can expect higher memory consumption and an increased latency in the flow collection.

cacheMaxFlows

integer

cacheMaxFlows is the max number of flows in an aggregate; when reached, the reporter sends the flows. Increasing cacheMaxFlows and cacheActiveTimeout can decrease the network traffic overhead and the CPU load, however you can expect higher memory consumption and an increased latency in the flow collection.

excludeInterfaces

array (string)

excludeInterfaces contains the interface names that are excluded from flow tracing. An entry enclosed by slashes, such as /br-/, is matched as a regular expression. Otherwise it is matched as a case-sensitive string.

features

array (string)

List of additional features to enable. They are all disabled by default. Enabling additional features might have performance impacts. Possible values are:

- PacketDrop: Enable the packets drop flows logging feature. This feature requires mounting the kernel debug filesystem, so the eBPF agent pods must run as privileged. If the spec.agent.ebpf.privileged parameter is not set, an error is reported.

- DNSTracking: Enable the DNS tracking feature.

- FlowRTT: Enable flow latency (sRTT) extraction in the eBPF agent from TCP traffic.

- NetworkEvents: Enable the network events monitoring feature, such as correlating flows and network policies. This feature requires mounting the kernel debug filesystem, so the eBPF agent pods must run as privileged. It requires using the OVN-Kubernetes network plugin with the Observability feature.
IMPORTANT: This feature is available as a Technology Preview.

- PacketTranslation: Enable enriching flows with packet translation information, such as Service NAT.

- EbpfManager: Unsupported * . Use eBPF Manager to manage Network Observability eBPF programs. Pre-requisite: the eBPF Manager operator (or upstream bpfman operator) must be installed.

- UDNMapping: Unsupported *. Enable interfaces mapping to User Defined Networks (UDN).
This feature requires mounting the kernel debug filesystem, so the eBPF agent pods must run as privileged. It requires using the OVN-Kubernetes network plugin with the Observability feature.

flowFilter

object

flowFilter defines the eBPF agent configuration regarding flow filtering.

imagePullPolicy

string

imagePullPolicy is the Kubernetes pull policy for the image defined above

interfaces

array (string)

interfaces contains the interface names from where flows are collected. If empty, the agent fetches all the interfaces in the system, excepting the ones listed in excludeInterfaces. An entry enclosed by slashes, such as /br-/, is matched as a regular expression. Otherwise it is matched as a case-sensitive string.

kafkaBatchSize

integer

kafkaBatchSize limits the maximum size of a request in bytes before being sent to a partition. Ignored when not using Kafka. Default: 1MB.

logLevel

string

logLevel defines the log level for the Network Observability eBPF Agent

metrics

object

metrics defines the eBPF agent configuration regarding metrics.

privileged

boolean

Privileged mode for the eBPF Agent container. When ignored or set to false, the operator sets granular capabilities (BPF, PERFMON, NET_ADMIN, SYS_RESOURCE) to the container. If for some reason these capabilities cannot be set, such as if an old kernel version not knowing CAP_BPF is in use, then you can turn on this mode for more global privileges. Some agent features require the privileged mode, such as packet drops tracking (see features) and SR-IOV support.

resources

object

resources are the compute resources required by this container. For more information, see https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

sampling

integer

Sampling rate of the flow reporter. 100 means one flow on 100 is sent. 0 or 1 means all flows are sampled.

env

object (string)

env allows passing custom environment variables to underlying components. Useful for passing some very concrete performance-tuning options, such as GOGC and GOMAXPROCS, that should not be publicly exposed as part of the FlowCollector descriptor, as they are only useful in edge debug or support scenarios.

scheduling

object

scheduling controls how the pods are scheduled on nodes.

affinity

object

If specified, the pod’s scheduling constraints. For documentation, refer to https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#scheduling.

nodeSelector

object (string)

nodeSelector allows scheduling of pods only onto nodes that have each of the specified labels. For documentation, refer to https://kubernetes.io/docs/concepts/configuration/assign-pod-node/.

priorityClassName

string

If specified, indicates the pod’s priority. For documentation, refer to https://kubernetes.io/docs/concepts/scheduling-eviction/pod-priority-preemption/#how-to-use-priority-and-preemption. If not specified, default priority is used, or zero if there is no default.

tolerations

array

tolerations is a list of tolerations that allow the pod to schedule onto nodes with matching taints. For documentation, refer to https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#scheduling.

action

string

action defines the action to perform on the flows that match the filter. The available options are Accept, which is the default, and Reject.

cidr

string

cidr defines the IP CIDR to filter flows by. Examples: 10.10.10.0/24 or 100:100:100:100::/64

destPorts

integer-or-string

destPorts optionally defines the destination ports to filter flows by. To filter a single port, set a single port as an integer value. For example, destPorts: 80. To filter a range of ports, use a "start-end" range in string format. For example, destPorts: "80-100". To filter two ports, use a "port1,port2" in string format. For example, ports: "80,100".

direction

string

direction optionally defines a direction to filter flows by. The available options are Ingress and Egress.

enable

boolean

Set enable to true to enable the eBPF flow filtering feature.

icmpCode

integer

icmpCode, for Internet Control Message Protocol (ICMP) traffic, optionally defines the ICMP code to filter flows by.

icmpType

integer

icmpType, for ICMP traffic, optionally defines the ICMP type to filter flows by.

peerCIDR

string

peerCIDR defines the Peer IP CIDR to filter flows by. Examples: 10.10.10.0/24 or 100:100:100:100::/64

peerIP

string

peerIP optionally defines the remote IP address to filter flows by. Example: 10.10.10.10.

pktDrops

boolean

pktDrops optionally filters only flows containing packet drops.

ports

integer-or-string

ports optionally defines the ports to filter flows by. It is used both for source and destination ports. To filter a single port, set a single port as an integer value. For example, ports: 80. To filter a range of ports, use a "start-end" range in string format. For example, ports: "80-100". To filter two ports, use a "port1,port2" in string format. For example, ports: "80,100".

protocol

string

protocol optionally defines a protocol to filter flows by. The available options are TCP, UDP, ICMP, ICMPv6, and SCTP.

rules

array

rules defines a list of filtering rules on the eBPF Agents. When filtering is enabled, by default, flows that don’t match any rule are rejected. To change the default, you can define a rule that accepts everything: { action: "Accept", cidr: "0.0.0.0/0" }, and then refine with rejecting rules. Unsupported *.

sampling

integer

sampling sampling rate for the matched flows, overriding the global sampling defined at spec.agent.ebpf.sampling.

sourcePorts

integer-or-string

sourcePorts optionally defines the source ports to filter flows by. To filter a single port, set a single port as an integer value. For example, sourcePorts: 80. To filter a range of ports, use a "start-end" range in string format. For example, sourcePorts: "80-100". To filter two ports, use a "port1,port2" in string format. For example, ports: "80,100".

tcpFlags

string

tcpFlags optionally defines TCP flags to filter flows by. In addition to the standard flags (RFC-9293), you can also filter by one of the three following combinations: SYN-ACK, FIN-ACK, and RST-ACK.

action

string

action defines the action to perform on the flows that match the filter. The available options are Accept, which is the default, and Reject.

cidr

string

cidr defines the IP CIDR to filter flows by. Examples: 10.10.10.0/24 or 100:100:100:100::/64

destPorts

integer-or-string

destPorts optionally defines the destination ports to filter flows by. To filter a single port, set a single port as an integer value. For example, destPorts: 80. To filter a range of ports, use a "start-end" range in string format. For example, destPorts: "80-100". To filter two ports, use a "port1,port2" in string format. For example, ports: "80,100".

direction

string

direction optionally defines a direction to filter flows by. The available options are Ingress and Egress.

icmpCode

integer

icmpCode, for Internet Control Message Protocol (ICMP) traffic, optionally defines the ICMP code to filter flows by.

icmpType

integer

icmpType, for ICMP traffic, optionally defines the ICMP type to filter flows by.

peerCIDR

string

peerCIDR defines the Peer IP CIDR to filter flows by. Examples: 10.10.10.0/24 or 100:100:100:100::/64

peerIP

string

peerIP optionally defines the remote IP address to filter flows by. Example: 10.10.10.10.

pktDrops

boolean

pktDrops optionally filters only flows containing packet drops.

ports

integer-or-string

ports optionally defines the ports to filter flows by. It is used both for source and destination ports. To filter a single port, set a single port as an integer value. For example, ports: 80. To filter a range of ports, use a "start-end" range in string format. For example, ports: "80-100". To filter two ports, use a "port1,port2" in string format. For example, ports: "80,100".

protocol

string

protocol optionally defines a protocol to filter flows by. The available options are TCP, UDP, ICMP, ICMPv6, and SCTP.

sampling

integer

sampling sampling rate for the matched flows, overriding the global sampling defined at spec.agent.ebpf.sampling.

sourcePorts

integer-or-string

sourcePorts optionally defines the source ports to filter flows by. To filter a single port, set a single port as an integer value. For example, sourcePorts: 80. To filter a range of ports, use a "start-end" range in string format. For example, sourcePorts: "80-100". To filter two ports, use a "port1,port2" in string format. For example, ports: "80,100".

tcpFlags

string

tcpFlags optionally defines TCP flags to filter flows by. In addition to the standard flags (RFC-9293), you can also filter by one of the three following combinations: SYN-ACK, FIN-ACK, and RST-ACK.

disableAlerts

array (string)

disableAlerts is a list of alerts that should be disabled. Possible values are:

NetObservDroppedFlows, which is triggered when the eBPF agent is missing packets or flows, such as when the BPF hashmap is busy or full, or the capacity limiter is being triggered.

enable

boolean

Set enable to false to disable eBPF agent metrics collection. It is enabled by default.

server

object

Metrics server endpoint configuration for the Prometheus scraper.

port

integer

The metrics server HTTP port.

tls

object

TLS configuration.

insecureSkipVerify

boolean

insecureSkipVerify allows skipping client-side verification of the provided certificate. If set to true, the providedCaFile field is ignored.

provided

object

TLS configuration when type is set to Provided.

providedCaFile

object

Reference to the CA file when type is set to Provided.

type

string

Select the type of TLS configuration:

- Disabled (default) to not configure TLS for the endpoint. - Provided to manually provide cert file and a key file. Unsupported *. - Auto to use OpenShift Container Platform auto generated certificate using annotations.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

file

string

File name within the config map or secret.

name

string

Name of the config map or secret containing the file.

namespace

string

Namespace of the config map or secret containing the file. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the file reference: configmap or secret.

limits

integer-or-string

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

requests

integer-or-string

Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

advanced

object

advanced allows setting some aspects of the internal configuration of the console plugin. This section is aimed mostly for debugging and fine-grained performance optimizations, such as GOGC and GOMAXPROCS env vars. Set these values at your own risk.

autoscaler

object

autoscaler spec of a horizontal pod autoscaler to set up for the plugin Deployment. Refer to HorizontalPodAutoscaler documentation (autoscaling/v2).

enable

boolean

Enables the console plugin deployment.

imagePullPolicy

string

imagePullPolicy is the Kubernetes pull policy for the image defined above

logLevel

string

logLevel for the console plugin backend

portNaming

object

portNaming defines the configuration of the port-to-service name translation

quickFilters

array

quickFilters configures quick filter presets for the Console plugin

replicas

integer

replicas defines the number of replicas (pods) to start.

resources

object

resources, in terms of compute resources, required by this container. For more information, see https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

args

array (string)

args allows passing custom arguments to underlying components. Useful for overriding some parameters, such as a URL or a configuration path, that should not be publicly exposed as part of the FlowCollector descriptor, as they are only useful in edge debug or support scenarios.

env

object (string)

env allows passing custom environment variables to underlying components. Useful for passing some very concrete performance-tuning options, such as GOGC and GOMAXPROCS, that should not be publicly exposed as part of the FlowCollector descriptor, as they are only useful in edge debug or support scenarios.

port

integer

port is the plugin service port. Do not use 9002, which is reserved for metrics.

register

boolean

register allows, when set to true, to automatically register the provided console plugin with the OpenShift Container Platform Console operator. When set to false, you can still register it manually by editing console.operator.openshift.io/cluster with the following command: oc patch console.operator.openshift.io cluster --type='json' -p '[{"op": "add", "path": "/spec/plugins/-", "value": "netobserv-plugin"}]'

scheduling

object

scheduling controls how the pods are scheduled on nodes.

affinity

object

If specified, the pod’s scheduling constraints. For documentation, refer to https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#scheduling.

nodeSelector

object (string)

nodeSelector allows scheduling of pods only onto nodes that have each of the specified labels. For documentation, refer to https://kubernetes.io/docs/concepts/configuration/assign-pod-node/.

priorityClassName

string

If specified, indicates the pod’s priority. For documentation, refer to https://kubernetes.io/docs/concepts/scheduling-eviction/pod-priority-preemption/#how-to-use-priority-and-preemption. If not specified, default priority is used, or zero if there is no default.

tolerations

array

tolerations is a list of tolerations that allow the pod to schedule onto nodes with matching taints. For documentation, refer to https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#scheduling.

enable

boolean

Enable the console plugin port-to-service name translation

portNames

object (string)

portNames defines additional port names to use in the console, for example, portNames: {"3100": "loki"}.

default

boolean

default defines whether this filter should be active by default or not

filter

object (string)

filter is a set of keys and values to be set when this filter is selected. Each key can relate to a list of values using a coma-separated string, for example, filter: {"src_namespace": "namespace1,namespace2"}.

name

string

Name of the filter, that is displayed in the Console

limits

integer-or-string

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

requests

integer-or-string

Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

ipfix

object

IPFIX configuration, such as the IP address and port to send enriched IPFIX flows to.

kafka

object

Kafka configuration, such as the address and topic, to send enriched flows to.

openTelemetry

object

OpenTelemetry configuration, such as the IP address and port to send enriched logs or metrics to.

type

string

type selects the type of exporters. The available options are Kafka, IPFIX, and OpenTelemetry.

targetHost

string

Address of the IPFIX external receiver.

targetPort

integer

Port for the IPFIX external receiver.

transport

string

Transport protocol (TCP or UDP) to be used for the IPFIX connection, defaults to TCP.

address

string

Address of the Kafka server

sasl

object

SASL authentication configuration. Unsupported *.

tls

object

TLS client configuration. When using TLS, verify that the address matches the Kafka port used for TLS, generally 9093.

topic

string

Kafka topic to use. It must exist. Network Observability does not create it.

clientIDReference

object

Reference to the secret or config map containing the client ID

clientSecretReference

object

Reference to the secret or config map containing the client secret

type

string

Type of SASL authentication to use, or Disabled if SASL is not used

file

string

File name within the config map or secret.

name

string

Name of the config map or secret containing the file.

namespace

string

Namespace of the config map or secret containing the file. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the file reference: configmap or secret.

file

string

File name within the config map or secret.

name

string

Name of the config map or secret containing the file.

namespace

string

Namespace of the config map or secret containing the file. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the file reference: configmap or secret.

caCert

object

caCert defines the reference of the certificate for the Certificate Authority.

enable

boolean

Enable TLS

insecureSkipVerify

boolean

insecureSkipVerify allows skipping client-side verification of the server certificate. If set to true, the caCert field is ignored.

userCert

object

userCert defines the user certificate reference and is used for mTLS. When you use one-way TLS, you can ignore this property.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

fieldsMapping

array

Custom fields mapping to an OpenTelemetry conformant format. By default, Network Observability format proposal is used: https://github.com/rhobs/observability-data-model/blob/main/network-observability.md#format-proposal . As there is currently no accepted standard for L3 or L4 enriched network logs, you can freely override it with your own.

headers

object (string)

Headers to add to messages (optional)

logs

object

OpenTelemetry configuration for logs.

metrics

object

OpenTelemetry configuration for metrics.

protocol

string

Protocol of the OpenTelemetry connection. The available options are http and grpc.

targetHost

string

Address of the OpenTelemetry receiver.

targetPort

integer

Port for the OpenTelemetry receiver.

tls

object

TLS client configuration.

input

string

multiplier

integer

output

string

enable

boolean

Set enable to true to send logs to an OpenTelemetry receiver.

enable

boolean

Set enable to true to send metrics to an OpenTelemetry receiver.

pushTimeInterval

string

Specify how often metrics are sent to a collector.

caCert

object

caCert defines the reference of the certificate for the Certificate Authority.

enable

boolean

Enable TLS

insecureSkipVerify

boolean

insecureSkipVerify allows skipping client-side verification of the server certificate. If set to true, the caCert field is ignored.

userCert

object

userCert defines the user certificate reference and is used for mTLS. When you use one-way TLS, you can ignore this property.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

address

string

Address of the Kafka server

sasl

object

SASL authentication configuration. Unsupported *.

tls

object

TLS client configuration. When using TLS, verify that the address matches the Kafka port used for TLS, generally 9093.

topic

string

Kafka topic to use. It must exist. Network Observability does not create it.

clientIDReference

object

Reference to the secret or config map containing the client ID

clientSecretReference

object

Reference to the secret or config map containing the client secret

type

string

Type of SASL authentication to use, or Disabled if SASL is not used

file

string

File name within the config map or secret.

name

string

Name of the config map or secret containing the file.

namespace

string

Namespace of the config map or secret containing the file. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the file reference: configmap or secret.

file

string

File name within the config map or secret.

name

string

Name of the config map or secret containing the file.

namespace

string

Namespace of the config map or secret containing the file. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the file reference: configmap or secret.

caCert

object

caCert defines the reference of the certificate for the Certificate Authority.

enable

boolean

Enable TLS

insecureSkipVerify

boolean

insecureSkipVerify allows skipping client-side verification of the server certificate. If set to true, the caCert field is ignored.

userCert

object

userCert defines the user certificate reference and is used for mTLS. When you use one-way TLS, you can ignore this property.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

advanced

object

advanced allows setting some aspects of the internal configuration of the Loki clients. This section is aimed mostly for debugging and fine-grained performance optimizations.

enable

boolean

Set enable to true to store flows in Loki. The Console plugin can use either Loki or Prometheus as a data source for metrics (see also spec.prometheus.querier), or both. Not all queries are transposable from Loki to Prometheus. Hence, if Loki is disabled, some features of the plugin are disabled as well, such as getting per-pod information or viewing raw flows. If both Prometheus and Loki are enabled, Prometheus takes precedence and Loki is used as a fallback for queries that Prometheus cannot handle. If they are both disabled, the Console plugin is not deployed.

lokiStack

object

Loki configuration for LokiStack mode. This is useful for an easy Loki Operator configuration. It is ignored for other modes.

manual

object

Loki configuration for Manual mode. This is the most flexible configuration. It is ignored for other modes.

microservices

object

Loki configuration for Microservices mode. Use this option when Loki is installed using the microservices deployment mode (https://grafana.com/docs/loki/latest/fundamentals/architecture/deployment-modes/#microservices-mode). It is ignored for other modes.

mode

string

mode must be set according to the installation mode of Loki:

- Use LokiStack when Loki is managed using the Loki Operator

- Use Monolithic when Loki is installed as a monolithic workload

- Use Microservices when Loki is installed as microservices, but without Loki Operator

- Use Manual if none of the options above match your setup

monolithic

object

Loki configuration for Monolithic mode. Use this option when Loki is installed using the monolithic deployment mode (https://grafana.com/docs/loki/latest/fundamentals/architecture/deployment-modes/#monolithic-mode). It is ignored for other modes.

readTimeout

string

readTimeout is the maximum console plugin loki query total time limit. A timeout of zero means no timeout.

writeBatchSize

integer

writeBatchSize is the maximum batch size (in bytes) of Loki logs to accumulate before sending.

writeBatchWait

string

writeBatchWait is the maximum time to wait before sending a Loki batch.

writeTimeout

string

writeTimeout is the maximum Loki time connection / request limit. A timeout of zero means no timeout.

staticLabels

object (string)

staticLabels is a map of common labels to set on each flow in Loki storage.

writeMaxBackoff

string

writeMaxBackoff is the maximum backoff time for Loki client connection between retries.

writeMaxRetries

integer

writeMaxRetries is the maximum number of retries for Loki client connections.

writeMinBackoff

string

writeMinBackoff is the initial backoff time for Loki client connection between retries.

name

string

Name of an existing LokiStack resource to use.

namespace

string

Namespace where this LokiStack resource is located. If omitted, it is assumed to be the same as spec.namespace.

authToken

string

authToken describes the way to get a token to authenticate to Loki.

- Disabled does not send any token with the request.

- Forward forwards the user token for authorization.

- Host [deprecated *] - uses the local pod service account to authenticate to Loki.

When using the Loki Operator, this must be set to Forward.

ingesterUrl

string

ingesterUrl is the address of an existing Loki ingester service to push the flows to. When using the Loki Operator, set it to the Loki gateway service with the network tenant set in path, for example https://loki-gateway-http.netobserv.svc:8080/api/logs/v1/network.

querierUrl

string

querierUrl specifies the address of the Loki querier service. When using the Loki Operator, set it to the Loki gateway service with the network tenant set in path, for example https://loki-gateway-http.netobserv.svc:8080/api/logs/v1/network.

statusTls

object

TLS client configuration for Loki status URL.

statusUrl

string

statusUrl specifies the address of the Loki /ready, /metrics and /config endpoints, in case it is different from the Loki querier URL. If empty, the querierUrl value is used. This is useful to show error messages and some context in the frontend. When using the Loki Operator, set it to the Loki HTTP query frontend service, for example https://loki-query-frontend-http.netobserv.svc:3100/. statusTLS configuration is used when statusUrl is set.

tenantID

string

tenantID is the Loki X-Scope-OrgID that identifies the tenant for each request. When using the Loki Operator, set it to network, which corresponds to a special tenant mode.

tls

object

TLS client configuration for Loki URL.

caCert

object

caCert defines the reference of the certificate for the Certificate Authority.

enable

boolean

Enable TLS

insecureSkipVerify

boolean

insecureSkipVerify allows skipping client-side verification of the server certificate. If set to true, the caCert field is ignored.

userCert

object

userCert defines the user certificate reference and is used for mTLS. When you use one-way TLS, you can ignore this property.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

caCert

object

caCert defines the reference of the certificate for the Certificate Authority.

enable

boolean

Enable TLS

insecureSkipVerify

boolean

insecureSkipVerify allows skipping client-side verification of the server certificate. If set to true, the caCert field is ignored.

userCert

object

userCert defines the user certificate reference and is used for mTLS. When you use one-way TLS, you can ignore this property.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

ingesterUrl

string

ingesterUrl is the address of an existing Loki ingester service to push the flows to.

querierUrl

string

querierURL specifies the address of the Loki querier service.

tenantID

string

tenantID is the Loki X-Scope-OrgID header that identifies the tenant for each request.

tls

object

TLS client configuration for Loki URL.

caCert

object

caCert defines the reference of the certificate for the Certificate Authority.

enable

boolean

Enable TLS

insecureSkipVerify

boolean

insecureSkipVerify allows skipping client-side verification of the server certificate. If set to true, the caCert field is ignored.

userCert

object

userCert defines the user certificate reference and is used for mTLS. When you use one-way TLS, you can ignore this property.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

tenantID

string

tenantID is the Loki X-Scope-OrgID header that identifies the tenant for each request.

tls

object

TLS client configuration for Loki URL.

url

string

url is the unique address of an existing Loki service that points to both the ingester and the querier.

caCert

object

caCert defines the reference of the certificate for the Certificate Authority.

enable

boolean

Enable TLS

insecureSkipVerify

boolean

insecureSkipVerify allows skipping client-side verification of the server certificate. If set to true, the caCert field is ignored.

userCert

object

userCert defines the user certificate reference and is used for mTLS. When you use one-way TLS, you can ignore this property.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

additionalNamespaces

array (string)

additionalNamespaces contains additional namespaces allowed to connect to the Network Observability namespace. It provides flexibility in the network policy configuration, but if you need a more specific configuration, you can disable it and install your own instead.

enable

boolean

Set enable to true to deploy network policies on the namespaces used by Network Observability (main and privileged). It is disabled by default. These network policies better isolate the Network Observability components to prevent undesired connections to them. To increase the security of connections, enable this option or create your own network policy.

addZone

boolean

addZone allows availability zone awareness by labelling flows with their source and destination zones. This feature requires the "topology.kubernetes.io/zone" label to be set on nodes.

advanced

object

advanced allows setting some aspects of the internal configuration of the flow processor. This section is aimed mostly for debugging and fine-grained performance optimizations, such as GOGC and GOMAXPROCS env vars. Set these values at your own risk.

clusterName

string

clusterName is the name of the cluster to appear in the flows data. This is useful in a multi-cluster context. When using OpenShift Container Platform, leave empty to make it automatically determined.

deduper

object

deduper allows you to sample or drop flows identified as duplicates, in order to save on resource usage. Unsupported *.

filters

array

filters lets you define custom filters to limit the amount of generated flows. These filters provide more flexibility than the eBPF Agent filters (in spec.agent.ebpf.flowFilter), such as allowing to filter by Kubernetes namespace, but with a lesser improvement in performance. Unsupported *.

imagePullPolicy

string

imagePullPolicy is the Kubernetes pull policy for the image defined above

kafkaConsumerAutoscaler

object

kafkaConsumerAutoscaler is the spec of a horizontal pod autoscaler to set up for flowlogs-pipeline-transformer, which consumes Kafka messages. This setting is ignored when Kafka is disabled. Refer to HorizontalPodAutoscaler documentation (autoscaling/v2).

kafkaConsumerBatchSize

integer

kafkaConsumerBatchSize indicates to the broker the maximum batch size, in bytes, that the consumer accepts. Ignored when not using Kafka. Default: 10MB.

kafkaConsumerQueueCapacity

integer

kafkaConsumerQueueCapacity defines the capacity of the internal message queue used in the Kafka consumer client. Ignored when not using Kafka.

kafkaConsumerReplicas

integer

kafkaConsumerReplicas defines the number of replicas (pods) to start for flowlogs-pipeline-transformer, which consumes Kafka messages. This setting is ignored when Kafka is disabled.

logLevel

string

logLevel of the processor runtime

logTypes

string

logTypes defines the desired record types to generate. Possible values are:

- Flows to export regular network flows. This is the default.

- Conversations to generate events for started conversations, ended conversations as well as periodic "tick" updates.

- EndedConversations to generate only ended conversations events.

- All to generate both network flows and all conversations events. It is not recommended due to the impact on resources footprint.

metrics

object

Metrics define the processor configuration regarding metrics

multiClusterDeployment

boolean

Set multiClusterDeployment to true to enable multi clusters feature. This adds clusterName label to flows data

resources

object

resources are the compute resources required by this container. For more information, see https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

subnetLabels

object

subnetLabels allows to define custom labels on subnets and IPs or to enable automatic labelling of recognized subnets in OpenShift Container Platform, which is used to identify cluster external traffic. When a subnet matches the source or destination IP of a flow, a corresponding field is added: SrcSubnetLabel or DstSubnetLabel.

conversationEndTimeout

string

conversationEndTimeout is the time to wait after a network flow is received, to consider the conversation ended. This delay is ignored when a FIN packet is collected for TCP flows (see conversationTerminatingTimeout instead).

conversationHeartbeatInterval

string

conversationHeartbeatInterval is the time to wait between "tick" events of a conversation

conversationTerminatingTimeout

string

conversationTerminatingTimeout is the time to wait from detected FIN flag to end a conversation. Only relevant for TCP flows.

dropUnusedFields

boolean

dropUnusedFields [deprecated *] this setting is not used anymore.

enableKubeProbes

boolean

enableKubeProbes is a flag to enable or disable Kubernetes liveness and readiness probes

env

object (string)

env allows passing custom environment variables to underlying components. Useful for passing some very concrete performance-tuning options, such as GOGC and GOMAXPROCS, that should not be publicly exposed as part of the FlowCollector descriptor, as they are only useful in edge debug or support scenarios.

healthPort

integer

healthPort is a collector HTTP port in the Pod that exposes the health check API

port

integer

Port of the flow collector (host port). By convention, some values are forbidden. It must be greater than 1024 and different from 4500, 4789 and 6081.

profilePort

integer

profilePort allows setting up a Go pprof profiler listening to this port

scheduling

object

scheduling controls how the pods are scheduled on nodes.

secondaryNetworks

array

Defines secondary networks to be checked for resources identification. To guarantee a correct identification, indexed values must form an unique identifier across the cluster. If the same index is used by several resources, those resources might be incorrectly labeled.

affinity

object

If specified, the pod’s scheduling constraints. For documentation, refer to https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#scheduling.

nodeSelector

object (string)

nodeSelector allows scheduling of pods only onto nodes that have each of the specified labels. For documentation, refer to https://kubernetes.io/docs/concepts/configuration/assign-pod-node/.

priorityClassName

string

If specified, indicates the pod’s priority. For documentation, refer to https://kubernetes.io/docs/concepts/scheduling-eviction/pod-priority-preemption/#how-to-use-priority-and-preemption. If not specified, default priority is used, or zero if there is no default.

tolerations

array

tolerations is a list of tolerations that allow the pod to schedule onto nodes with matching taints. For documentation, refer to https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#scheduling.

index

array (string)

index is a list of fields to use for indexing the pods. They should form a unique Pod identifier across the cluster. Can be any of: MAC, IP, Interface. Fields absent from the 'k8s.v1.cni.cncf.io/network-status' annotation must not be added to the index.

name

string

name should match the network name as visible in the pods annotation 'k8s.v1.cni.cncf.io/network-status'.

mode

string

Set the Processor de-duplication mode. It comes in addition to the Agent-based deduplication because the Agent cannot de-duplicate same flows reported from different nodes.

- Use Drop to drop every flow considered as duplicates, allowing saving more on resource usage but potentially losing some information such as the network interfaces used from peer, or network events.

- Use Sample to randomly keep only one flow on 50, which is the default, among the ones considered as duplicates. This is a compromise between dropping every duplicate or keeping every duplicate. This sampling action comes in addition to the Agent-based sampling. If both Agent and Processor sampling values are 50, the combined sampling is 1:2500.

- Use Disabled to turn off Processor-based de-duplication.

sampling

integer

sampling is the sampling rate when deduper mode is Sample.

allOf

array

filters is a list of matches that must be all satisfied in order to remove a flow.

outputTarget

string

If specified, these filters only target a single output: Loki, Metrics or Exporters. By default, all outputs are targeted.

sampling

integer

sampling is an optional sampling rate to apply to this filter.

field

string

Name of the field to filter on. Refer to the documentation for the list of available fields: https://github.com/netobserv/network-observability-operator/blob/main/docs/flows-format.adoc.

matchType

string

Type of matching to apply.

value

string

Value to filter on. When matchType is Equal or NotEqual, you can use field injection with $(SomeField) to refer to any other field of the flow.

disableAlerts

array (string)

disableAlerts is a list of alerts that should be disabled. Possible values are:

NetObservNoFlows, which is triggered when no flows are being observed for a certain period.

NetObservLokiError, which is triggered when flows are being dropped due to Loki errors.

includeList

array (string)

includeList is a list of metric names to specify which ones to generate. The names correspond to the names in Prometheus without the prefix. For example, namespace_egress_packets_total shows up as netobserv_namespace_egress_packets_total in Prometheus. Note that the more metrics you add, the bigger is the impact on Prometheus workload resources. Metrics enabled by default are: namespace_flows_total, node_ingress_bytes_total, node_egress_bytes_total, workload_ingress_bytes_total, workload_egress_bytes_total, namespace_drop_packets_total (when PacketDrop feature is enabled), namespace_rtt_seconds (when FlowRTT feature is enabled), namespace_dns_latency_seconds (when DNSTracking feature is enabled), namespace_network_policy_events_total (when NetworkEvents feature is enabled). More information, with full list of available metrics: https://github.com/netobserv/network-observability-operator/blob/main/docs/Metrics.md

server

object

Metrics server endpoint configuration for Prometheus scraper

port

integer

The metrics server HTTP port.

tls

object

TLS configuration.

insecureSkipVerify

boolean

insecureSkipVerify allows skipping client-side verification of the provided certificate. If set to true, the providedCaFile field is ignored.

provided

object

TLS configuration when type is set to Provided.

providedCaFile

object

Reference to the CA file when type is set to Provided.

type

string

Select the type of TLS configuration:

- Disabled (default) to not configure TLS for the endpoint. - Provided to manually provide cert file and a key file. Unsupported *. - Auto to use OpenShift Container Platform auto generated certificate using annotations.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

file

string

File name within the config map or secret.

name

string

Name of the config map or secret containing the file.

namespace

string

Namespace of the config map or secret containing the file. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the file reference: configmap or secret.

limits

integer-or-string

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

requests

integer-or-string

Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

customLabels

array

customLabels allows to customize subnets and IPs labelling, such as to identify cluster-external workloads or web services. If you enable openShiftAutoDetect, customLabels can override the detected subnets in case they overlap.

openShiftAutoDetect

boolean

openShiftAutoDetect allows, when set to true, to detect automatically the machines, pods and services subnets based on the OpenShift Container Platform install configuration and the Cluster Network Operator configuration. Indirectly, this is a way to accurately detect external traffic: flows that are not labeled for those subnets are external to the cluster. Enabled by default on OpenShift Container Platform.

cidrs

array (string)

List of CIDRs, such as ["1.2.3.4/32"].

name

string

Label name, used to flag matching flows.

querier

object

Prometheus querying configuration, such as client settings, used in the Console plugin.

enable

boolean

When enable is true, the Console plugin queries flow metrics from Prometheus instead of Loki whenever possible. It is enbaled by default: set it to false to disable this feature. The Console plugin can use either Loki or Prometheus as a data source for metrics (see also spec.loki), or both. Not all queries are transposable from Loki to Prometheus. Hence, if Loki is disabled, some features of the plugin are disabled as well, such as getting per-pod information or viewing raw flows. If both Prometheus and Loki are enabled, Prometheus takes precedence and Loki is used as a fallback for queries that Prometheus cannot handle. If they are both disabled, the Console plugin is not deployed.

manual

object

Prometheus configuration for Manual mode.

mode

string

mode must be set according to the type of Prometheus installation that stores Network Observability metrics:

- Use Auto to try configuring automatically. In OpenShift Container Platform, it uses the Thanos querier from OpenShift Container Platform Cluster Monitoring

- Use Manual for a manual setup

timeout

string

timeout is the read timeout for console plugin queries to Prometheus. A timeout of zero means no timeout.

forwardUserToken

boolean

Set true to forward logged in user token in queries to Prometheus

tls

object

TLS client configuration for Prometheus URL.

url

string

url is the address of an existing Prometheus service to use for querying metrics.

caCert

object

caCert defines the reference of the certificate for the Certificate Authority.

enable

boolean

Enable TLS

insecureSkipVerify

boolean

insecureSkipVerify allows skipping client-side verification of the server certificate. If set to true, the caCert field is ignored.

userCert

object

userCert defines the user certificate reference and is used for mTLS. When you use one-way TLS, you can ignore this property.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.

certFile

string

certFile defines the path to the certificate file name within the config map or secret.

certKey

string

certKey defines the path to the certificate private key file name within the config map or secret. Omit when the key is not necessary.

name

string

Name of the config map or secret containing certificates.

namespace

string

Namespace of the config map or secret containing certificates. If omitted, the default is to use the same namespace as where Network Observability is deployed. If the namespace is different, the config map or the secret is copied so that it can be mounted as required.

type

string

Type for the certificate reference: configmap or secret.