Red Hat Summit Red Hat SummitSuporteConsoleDesenvolvedoresComeçar um testeContato

Este conteúdo não está disponível no idioma selecionado.

Chapter 11. Nodes

11.1. Node maintenance
Copiar o link

Nodes can be placed into maintenance mode by using the oc adm utility or NodeMaintenance custom resources (CRs).

Note

The node-maintenance-operator (NMO) is no longer shipped with OpenShift Virtualization. It is deployed as a standalone Operator from the OperatorHub in the OpenShift Container Platform web console or by using the OpenShift CLI (oc).

For more information on remediation, fencing, and maintaining nodes, see the Workload Availability for Red Hat OpenShift documentation.

Important

Virtual machines (VMs) must have a persistent volume claim (PVC) with a shared ReadWriteMany (RWX) access mode to be live migrated.

The Node Maintenance Operator watches for new or deleted NodeMaintenance CRs. When a new NodeMaintenance CR is detected, no new workloads are scheduled and the node is cordoned off from the rest of the cluster. All pods that can be evicted are evicted from the node. When a NodeMaintenance CR is deleted, the node that is referenced in the CR is made available for new workloads.

Note

Using a NodeMaintenance CR for node maintenance tasks achieves the same results as the oc adm cordon and oc adm drain commands using standard OpenShift Container Platform custom resource processing.

11.1.1. Eviction strategies
Copiar o link

Placing a node into maintenance marks the node as unschedulable and drains all the VMs and pods from it.

You can configure eviction strategies for virtual machines (VMs) or for the cluster.

VM eviction strategy

The VM LiveMigrate eviction strategy ensures that a virtual machine instance (VMI) is not interrupted if the node is placed into maintenance or drained. VMIs with this eviction strategy will be live migrated to another node.

You can configure eviction strategies for virtual machines (VMs) by using the web console or the command line.

Important

The default eviction strategy is LiveMigrate. A non-migratable VM with a LiveMigrate eviction strategy might prevent nodes from draining or block an infrastructure upgrade because the VM is not evicted from the node. This situation causes a migration to remain in a Pending or Scheduling state unless you shut down the VM manually.

You must set the eviction strategy of non-migratable VMs to LiveMigrateIfPossible, which does not block an upgrade, or to None, for VMs that should not be migrated.

Cluster eviction strategy
You can configure an eviction strategy for the cluster to prioritize workload continuity or infrastructure upgrade.
Important

Configuring a cluster eviction strategy is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Expand
Table 11.1. Cluster eviction strategies
Eviction strategyDescriptionInterrupts workflowBlocks upgrades

LiveMigrate 1

Prioritizes workload continuity over upgrades.

No

Yes 2

LiveMigrateIfPossible

Prioritizes upgrades over workload continuity to ensure that the environment is updated.

Yes

No

None 3

Shuts down VMs with no eviction strategy.

Yes

No

  1. Default eviction strategy for multi-node clusters.
  2. If a VM blocks an upgrade, you must shut down the VM manually.
  3. Default eviction strategy for single-node OpenShift.

11.1.1.1. Configuring a VM eviction strategy using the command line
Copiar o link

You can configure an eviction strategy for a virtual machine (VM) by using the command line.

Important

The default eviction strategy is LiveMigrate. A non-migratable VM with a LiveMigrate eviction strategy might prevent nodes from draining or block an infrastructure upgrade because the VM is not evicted from the node. This situation causes a migration to remain in a Pending or Scheduling state unless you shut down the VM manually.

You must set the eviction strategy of non-migratable VMs to LiveMigrateIfPossible, which does not block an upgrade, or to None, for VMs that should not be migrated.

Procedure

  1. Edit the VirtualMachine resource by running the following command: 

    $ oc edit vm <vm_name> -n <namespace>
    Copy to Clipboard Toggle word wrap

    Example eviction strategy

    apiVersion: kubevirt.io/v1
kind: VirtualMachine
metadata:
  name: <vm_name>
spec:
  template:
    spec:
      evictionStrategy: LiveMigrateIfPossible
    1 
    
# ...
    Copy to Clipboard Toggle word wrap

    1
    Specify the eviction strategy. The default value is LiveMigrate.

  2. Restart the VM to apply the changes: 

    $ virtctl restart <vm_name> -n <namespace>
    Copy to Clipboard Toggle word wrap

11.1.1.2. Configuring a cluster eviction strategy by using the command line
Copiar o link

You can configure an eviction strategy for a cluster by using the command line.

Important

Configuring a cluster eviction strategy is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Procedure

  1. Edit the hyperconverged resource by running the following command: 

    $ oc edit hyperconverged kubevirt-hyperconverged -n openshift-cnv
    Copy to Clipboard Toggle word wrap

  2. Set the cluster eviction strategy as shown in the following example:

    Example cluster eviction strategy

    apiVersion: hco.kubevirt.io/v1beta1
kind: HyperConverged
metadata:
  name: kubevirt-hyperconverged
spec:
  evictionStrategy: LiveMigrate
# ...
    Copy to Clipboard Toggle word wrap

11.1.2. Run strategies
Copiar o link

A virtual machine (VM) configured with spec.running: true is immediately restarted. The spec.runStrategy key provides greater flexibility for determining how a VM behaves under certain conditions.

Important

The spec.runStrategy and spec.running keys are mutually exclusive. Only one of them can be used.

A VM configuration with both keys is invalid.

11.1.2.1. Run strategies
Copiar o link

The spec.runStrategy key has four possible values:

Always
The virtual machine instance (VMI) is always present when a virtual machine (VM) is created on another node. A new VMI is created if the original stops for any reason. This is the same behavior as running: true.
RerunOnFailure
The VMI is re-created on another node if the previous instance fails. The instance is not re-created if the VM stops successfully, such as when it is shut down.
Manual
You control the VMI state manually with the start, stop, and restart virtctl client commands. The VM is not automatically restarted.
Halted
No VMI is present when a VM is created. This is the same behavior as running: false.

Different combinations of the virtctl start, stop and restart commands affect the run strategy.

The following table describes a VM’s transition between states. The first column shows the VM’s initial run strategy. The remaining columns show a virtctl command and the new run strategy after that command is run.

Expand
Table 11.2. Run strategy before and after virtctl commands
Initial run strategyStartStopRestart

Always

-

Halted

Always

RerunOnFailure

RerunOnFailure

RerunOnFailure

RerunOnFailure

Manual

Manual

Manual

Manual

Halted

Always

-

-

Note

If a node in a cluster installed by using installer-provisioned infrastructure fails the machine health check and is unavailable, VMs with runStrategy: Always or runStrategy: RerunOnFailure are rescheduled on a new node.

11.1.2.2. Configuring a VM run strategy by using the command line
Copiar o link

You can configure a run strategy for a virtual machine (VM) by using the command line.

Important

The spec.runStrategy and spec.running keys are mutually exclusive. A VM configuration that contains values for both keys is invalid.

Procedure

  • Edit the VirtualMachine resource by running the following command: 

    $ oc edit vm <vm_name> -n <namespace>
    Copy to Clipboard Toggle word wrap

    Example run strategy

    apiVersion: kubevirt.io/v1
kind: VirtualMachine
spec:
  runStrategy: Always
# ...
    Copy to Clipboard Toggle word wrap

11.1.3. Maintaining bare metal nodes
Copiar o link

When you deploy OpenShift Container Platform on bare metal infrastructure, there are additional considerations that must be taken into account compared to deploying on cloud infrastructure. Unlike in cloud environments where the cluster nodes are considered ephemeral, re-provisioning a bare metal node requires significantly more time and effort for maintenance tasks.

When a bare metal node fails, for example, if a fatal kernel error happens or a NIC card hardware failure occurs, workloads on the failed node need to be restarted elsewhere else on the cluster while the problem node is repaired or replaced. Node maintenance mode allows cluster administrators to gracefully power down nodes, moving workloads to other parts of the cluster and ensuring workloads do not get interrupted. Detailed progress and node status details are provided during maintenance.

11.2. Managing node labeling for obsolete CPU models
Copiar o link

You can schedule a virtual machine (VM) on a node as long as the VM CPU model and policy are supported by the node.

11.2.1. About node labeling for obsolete CPU models
Copiar o link

The OpenShift Virtualization Operator uses a predefined list of obsolete CPU models to ensure that a node supports only valid CPU models for scheduled VMs.

By default, the following CPU models are eliminated from the list of labels generated for the node:

Example 11.1. Obsolete CPU models

"486"
Conroe
athlon
core2duo
coreduo
kvm32
kvm64
n270
pentium
pentium2
pentium3
pentiumpro
phenom
qemu32
qemu64
Copy to Clipboard Toggle word wrap

This predefined list is not visible in the HyperConverged CR. You cannot remove CPU models from this list, but you can add to the list by editing the spec.obsoleteCPUs.cpuModels field of the HyperConverged CR.

11.2.2. About node labeling for CPU features
Copiar o link

Through the process of iteration, the base CPU features in the minimum CPU model are eliminated from the list of labels generated for the node.

For example:

  • An environment might have two supported CPU models: Penryn and Haswell.

  • If Penryn is specified as the CPU model for minCPU, each base CPU feature for Penryn is compared to the list of CPU features supported by Haswell.

    Example 11.2. CPU features supported by Penryn

    apic
clflush
cmov
cx16
cx8
de
fpu
fxsr
lahf_lm
lm
mca
mce
mmx
msr
mtrr
nx
pae
pat
pge
pni
pse
pse36
sep
sse
sse2
sse4.1
ssse3
syscall
tsc
    Copy to Clipboard Toggle word wrap

    Example 11.3. CPU features supported by Haswell

    aes
apic
avx
avx2
bmi1
bmi2
clflush
cmov
cx16
cx8
de
erms
fma
fpu
fsgsbase
fxsr
hle
invpcid
lahf_lm
lm
mca
mce
mmx
movbe
msr
mtrr
nx
pae
pat
pcid
pclmuldq
pge
pni
popcnt
pse
pse36
rdtscp
rtm
sep
smep
sse
sse2
sse4.1
sse4.2
ssse3
syscall
tsc
tsc-deadline
x2apic
xsave
    Copy to Clipboard Toggle word wrap

  • If both Penryn and Haswell support a specific CPU feature, a label is not created for that feature. Labels are generated for CPU features that are supported only by Haswell and not by Penryn.

    Example 11.4. Node labels created for CPU features after iteration

    aes
avx
avx2
bmi1
bmi2
erms
fma
fsgsbase
hle
invpcid
movbe
pcid
pclmuldq
popcnt
rdtscp
rtm
sse4.2
tsc-deadline
x2apic
xsave
    Copy to Clipboard Toggle word wrap

11.2.3. Configuring obsolete CPU models
Copiar o link

You can configure a list of obsolete CPU models by editing the HyperConverged custom resource (CR).

Procedure

  • Edit the HyperConverged custom resource, specifying the obsolete CPU models in the obsoleteCPUs array. For example: 

    apiVersion: hco.kubevirt.io/v1beta1
kind: HyperConverged
metadata:
  name: kubevirt-hyperconverged
  namespace: openshift-cnv
spec:
  obsoleteCPUs:
    cpuModels:
    1 
    
      - "<obsolete_cpu_1>"
      - "<obsolete_cpu_2>"
    minCPUModel: "<minimum_cpu_model>"
    2
    Copy to Clipboard Toggle word wrap
    1
    Replace the example values in the cpuModels array with obsolete CPU models. Any value that you specify is added to a predefined list of obsolete CPU models. The predefined list is not visible in the CR.
    2
    Replace this value with the minimum CPU model that you want to use for basic CPU features. If you do not specify a value, Penryn is used by default.

11.3. Preventing node reconciliation
Copiar o link

Use skip-node annotation to prevent the node-labeller from reconciling a node.

11.3.1. Using skip-node annotation
Copiar o link

If you want the node-labeller to skip a node, annotate that node by using the oc CLI.

Prerequisites

  • You have installed the OpenShift CLI (oc).

Procedure

  • Annotate the node that you want to skip by running the following command: 

    $ oc annotate node <node_name> node-labeller.kubevirt.io/skip-node=true
    1
    Copy to Clipboard Toggle word wrap
    1
    Replace <node_name> with the name of the relevant node to skip.

    Reconciliation resumes on the next cycle after the node annotation is removed or set to false.

11.4. Deleting a failed node to trigger virtual machine failover
Copiar o link

If a node fails and node health checks are not deployed on your cluster, virtual machines (VMs) with runStrategy: Always configured are not automatically relocated to healthy nodes.

11.4.1. Prerequisites
Copiar o link

  • A node where a virtual machine was running has the NotReady condition.
  • The virtual machine that was running on the failed node has runStrategy set to Always.
  • You have installed the OpenShift CLI (oc).

11.4.2. Deleting nodes from a bare metal cluster
Copiar o link

When you delete a node using the CLI, the node object is deleted in Kubernetes, but the pods that exist on the node are not deleted. Any bare pods not backed by a replication controller become inaccessible to OpenShift Container Platform. Pods backed by replication controllers are rescheduled to other available nodes. You must delete local manifest pods.

Procedure

Delete a node from an OpenShift Container Platform cluster running on bare metal by completing the following steps:

  1. Mark the node as unschedulable: 

    $ oc adm cordon <node_name>
    Copy to Clipboard Toggle word wrap

  2. Drain all pods on the node: 

    $ oc adm drain <node_name> --force=true
    Copy to Clipboard Toggle word wrap

    This step might fail if the node is offline or unresponsive. Even if the node does not respond, it might still be running a workload that writes to shared storage. To avoid data corruption, power down the physical hardware before you proceed.

  3. Delete the node from the cluster: 

    $ oc delete node <node_name>
    Copy to Clipboard Toggle word wrap

    Although the node object is now deleted from the cluster, it can still rejoin the cluster after reboot or if the kubelet service is restarted. To permanently delete the node and all its data, you must decommission the node.

  4. If you powered down the physical hardware, turn it back on so that the node can rejoin the cluster.

11.4.3. Verifying virtual machine failover
Copiar o link

After all resources are terminated on the unhealthy node, a new virtual machine instance (VMI) is automatically created on a healthy node for each relocated VM. To confirm that the VMI was created, view all VMIs by using the oc CLI.

11.4.3.1. Listing all virtual machine instances using the CLI
Copiar o link

You can list all virtual machine instances (VMIs) in your cluster, including standalone VMIs and those owned by virtual machines, by using the oc command-line interface (CLI).

Procedure

  • List all VMIs by running the following command: 

    $ oc get vmis -A
    Copy to Clipboard Toggle word wrap
Voltar ao topo
Red Hat logoGithubredditYoutubeTwitter

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Ajudamos os usuários da Red Hat a inovar e atingir seus objetivos com nossos produtos e serviços com conteúdo em que podem confiar. Explore nossas atualizações recentes.

Tornando o open source mais inclusivo

A Red Hat está comprometida em substituir a linguagem problemática em nosso código, documentação e propriedades da web. Para mais detalhes veja o Blog da Red Hat.

Sobre a Red Hat

Fornecemos soluções robustas que facilitam o trabalho das empresas em plataformas e ambientes, desde o data center principal até a borda da rede.

Theme

© 2025 Red Hat