Red Hat SummitRed Hat AMQ 6
As of February 2025, Red Hat is no longer supporting Red Hat AMQ 6. If you are using AMQ 6, please upgrade: Migrating to AMQ 7.Este conteúdo não está disponível no idioma selecionado.
4.4. Disconnect Container from Fabric
Abstract
For containers that joined a Fabric using fabric:join, the only way to disconnect from the fabric is by using the fabric:leave command.
Note
This command is only available from R13 and later.
Overview
Copiar o linkLink copiado para a área de transferência!
If you created a container using the fabric:container-create-child command, use the fabric:delete command as all of the details are stored within Zookeeper. However, for containers that joined a Fabric using fabric:join, the only way to disconnect from the fabric is by using the fabric:leave command.
Use the command
Copiar o linkLink copiado para a área de transferência!
If you specify the container using the fabric:leave command, the specified container leaves the fabric. Otherwise, fabric:leave disconnects the current container from the fabric.
fabric:leave containerName
fabric:leave containerNameContainer containerName will be disconnected from Fabric. This operation is not reversible. Do you want to proceed? (yes/no): yes Container containerName will leave Fabric and restart - cleanup will be done asynchronously.
Container containerName will be disconnected from Fabric. This operation is not reversible.
Do you want to proceed? (yes/no): yes
Container containerName will leave Fabric and restart - cleanup will be done asynchronously.Note
Once you see the above validation, you can create or join a container with the name (containerName) in the Fabric environment.
Validation
Copiar o linkLink copiado para a área de transferência!
There are several reasons you may be unable to disconnect the container from the fabric. The table below helps guide you if you encounter these scenarios.
| Console Validation | Action |
|---|---|
fabric:leave Container is part of the ensemble. It can't be disconnected from fabric. | In this case, you will not be able to disconnect the container. |
fabric:leave xyz Container xyz does not exist. | Check your spelling of the container to be sure you put in the right container name. |
fabric:leave child Container was created using Fabric. Please use fabric:container-delete command instead. | As the container did not join the fabric using the join command, use the suggested method to disconnect the container. |
fabric:leave joined Container joined has dependent containers ([child]). Can't disconnect it. Please remove its child containers first. | Remove the child containers before attempting to disconnect the desired container. |
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}