Red Hat Summit Red Hat SummitSuporteConsoleDesenvolvedoresComeçar um testeContato

Este conteúdo não está disponível no idioma selecionado.

Chapter 59. Replace Field Action

Replace field with a different key in the message in transit.

  • The required parameter 'renames' is a comma-separated list of colon-delimited renaming pairs like for example 'foo:bar,abc:xyz' and it represents the field rename mappings.
  • The optional parameter 'enabled' represents the fields to include. If specified, only the named fields will be included in the resulting message.
  • The optional parameter 'disabled' represents the fields to exclude. If specified, the listed fields will be excluded from the resulting message. This takes precedence over the 'enabled' parameter.
  • The default value of 'enabled' parameter is 'all', so all the fields of the payload will be included.
  • The default value of 'disabled' parameter is 'none', so no fields of the payload will be excluded.

59.1. Configuration Options
Copiar o link

The following table summarizes the configuration options available for the replace-field-action Kamelet:

Expand
PropertyNameDescriptionTypeDefaultExample

renames *

Renames

Comma separated list of field with new value to be renamed

string

 

"foo:bar,c1:c2"

disabled

Disabled

Comma separated list of fields to be disabled

string

"none"

 

enabled

Enabled

Comma separated list of fields to be enabled

string

"all"

 
Note

Fields marked with an asterisk (*) are mandatory.

59.2. Dependencies
Copiar o link

At runtime, the replace-field-action Kamelet relies upon the presence of the following dependencies:

  • github:openshift-integration.kamelet-catalog:camel-kamelets-utils:kamelet-catalog-1.6-SNAPSHOT
  • camel:core
  • camel:jackson
  • camel:kamelet

59.3. Usage
Copiar o link

This section describes how you can use the replace-field-action.

59.3.1. Knative Action
Copiar o link

You can use the replace-field-action Kamelet as an intermediate step in a Knative binding.

replace-field-action-binding.yaml

apiVersion: camel.apache.org/v1alpha1
kind: KameletBinding
metadata:
  name: replace-field-action-binding
spec:
  source:
    ref:
      kind: Kamelet
      apiVersion: camel.apache.org/v1alpha1
      name: timer-source
    properties:
      message: "Hello"
  steps:
  - ref:
      kind: Kamelet
      apiVersion: camel.apache.org/v1alpha1
      name: replace-field-action
    properties:
      renames: "foo:bar,c1:c2"
  sink:
    ref:
      kind: Channel
      apiVersion: messaging.knative.dev/v1
      name: mychannel
Copy to Clipboard Toggle word wrap

59.3.1.1. Prerequisite
Copiar o link

Make sure you have "Red Hat Integration - Camel K" installed into the OpenShift cluster you’re connected to.

59.3.1.2. Procedure for using the cluster CLI
Copiar o link

  1. Save the replace-field-action-binding.yaml file to your local drive, and then edit it as needed for your configuration.

  2. Run the action by using the following command: 

    oc apply -f replace-field-action-binding.yaml
    Copy to Clipboard Toggle word wrap

59.3.1.3. Procedure for using the Kamel CLI
Copiar o link

Configure and run the action by using the following command: 

kamel bind timer-source?message=Hello --step replace-field-action -p "step-0.renames=foo:bar,c1:c2" channel:mychannel
Copy to Clipboard Toggle word wrap

This command creates the KameletBinding in the current namespace on the cluster.

59.3.2. Kafka Action
Copiar o link

You can use the replace-field-action Kamelet as an intermediate step in a Kafka binding.

replace-field-action-binding.yaml

apiVersion: camel.apache.org/v1alpha1
kind: KameletBinding
metadata:
  name: replace-field-action-binding
spec:
  source:
    ref:
      kind: Kamelet
      apiVersion: camel.apache.org/v1alpha1
      name: timer-source
    properties:
      message: "Hello"
  steps:
  - ref:
      kind: Kamelet
      apiVersion: camel.apache.org/v1alpha1
      name: replace-field-action
    properties:
      renames: "foo:bar,c1:c2"
  sink:
    ref:
      kind: KafkaTopic
      apiVersion: kafka.strimzi.io/v1beta1
      name: my-topic
Copy to Clipboard Toggle word wrap

59.3.2.1. Prerequisites
Copiar o link

Ensure that you’ve installed the AMQ Streams operator in your OpenShift cluster and created a topic named my-topic in the current namespace. Make also sure you have "Red Hat Integration - Camel K" installed into the OpenShift cluster you’re connected to.

59.3.2.2. Procedure for using the cluster CLI
Copiar o link

  1. Save the replace-field-action-binding.yaml file to your local drive, and then edit it as needed for your configuration.

  2. Run the action by using the following command: 

    oc apply -f replace-field-action-binding.yaml
    Copy to Clipboard Toggle word wrap

59.3.2.3. Procedure for using the Kamel CLI
Copiar o link

Configure and run the action by using the following command: 

kamel bind timer-source?message=Hello --step replace-field-action -p "step-0.renames=foo:bar,c1:c2" kafka.strimzi.io/v1beta1:KafkaTopic:my-topic
Copy to Clipboard Toggle word wrap

This command creates the KameletBinding in the current namespace on the cluster.

59.4. Kamelet source file
Copiar o link

https://github.com/openshift-integration/kamelet-catalog/replace-field-action.kamelet.yaml

Voltar ao topo
Red Hat logoGithubredditYoutubeTwitter

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Ajudamos os usuários da Red Hat a inovar e atingir seus objetivos com nossos produtos e serviços com conteúdo em que podem confiar. Explore nossas atualizações recentes.

Tornando o open source mais inclusivo

A Red Hat está comprometida em substituir a linguagem problemática em nosso código, documentação e propriedades da web. Para mais detalhes veja o Blog da Red Hat.

Sobre a Red Hat

Fornecemos soluções robustas que facilitam o trabalho das empresas em plataformas e ambientes, desde o data center principal até a borda da rede.

Theme

© 2025 Red Hat