Este conteúdo não está disponível no idioma selecionado.

Chapter 3. Deployment

As a storage administrator, you can deploy the Ceph Object Gateway using the Ceph Orchestrator with the command line interface or the service specification. You can also configure multi-site Ceph Object Gateways, and remove the Ceph Object Gateway using the Ceph Orchestrator.

The cephadm command deploys the Ceph Object Gateway as a collection of daemons that manages a single-cluster deployment or a particular realm and zone in a multi-site deployment.

Note

With cephadm, the Ceph Object Gateway daemons are configured using the Ceph Monitor configuration database instead of the ceph.conf file or the command line options. If the configuration is not in the client.rgw section, then the Ceph Object Gateway daemons start up with default settings and bind to port 80.

This section covers the following administrative tasks:

Prerequisites

A running, and healthy Red Hat Ceph Storage cluster.
Root-level access to all the nodes.
Available nodes on the storage cluster.
All the managers, monitors, and OSDs are deployed in the storage cluster.

3.1. Deploying the Ceph Object Gateway using the command line interface

Using the Ceph Orchestrator, you can deploy the Ceph Object Gateway with the ceph orch command in the command line interface.

Prerequisites

A running Red Hat Ceph Storage cluster.
Root-level access to all the nodes.
Hosts are added to the cluster.
All manager, monitor and OSD daemons are deployed.

Procedure

Log into the Cephadm shell:
Example
```
[root@host01 ~]# cephadm shell
```
You can deploy the Ceph object gateway daemons in three different ways:

Method 1

Create realm, zone group, zone, and then use the placement specification with the host name:

Create a realm:

Syntax

radosgw-admin realm create --rgw-realm=REALM_NAME --default

Example

[ceph: root@host01 /]# radosgw-admin realm create --rgw-realm=test_realm --default

Create a zone group:

Syntax

radosgw-admin zonegroup create --rgw-zonegroup=ZONE_GROUP_NAME  --master --default

Example

[ceph: root@host01 /]# radosgw-admin zonegroup create --rgw-zonegroup=default  --master --default

Create a zone:

Syntax

radosgw-admin zone create --rgw-zonegroup=ZONE_GROUP_NAME --rgw-zone=ZONE_NAME --master --default

Example

[ceph: root@host01 /]# radosgw-admin zone create --rgw-zonegroup=default --rgw-zone=test_zone --master --default

Commit the changes:

Syntax

radosgw-admin period update --rgw-realm=REALM_NAME --commit

Example

[ceph: root@host01 /]# radosgw-admin period update --rgw-realm=test_realm --commit

Run the ceph orch apply command:

Syntax

ceph orch apply rgw NAME [--realm=REALM_NAME] [--zone=ZONE_NAME] [--zonegroup=ZONE_GROUP_NAME] --placement="NUMBER_OF_DAEMONS [HOST_NAME_1 HOST_NAME_2]"

Example

[ceph: root@host01 /]# ceph orch apply rgw test --realm=test_realm --zone=test_zone --zonegroup=default --placement="2 host01 host02"

Method 2

Use an arbitrary service name to deploy two Ceph Object Gateway daemons for a single cluster deployment:
Syntax
```
ceph orch apply rgw SERVICE_NAME
```
Example
```
[ceph: root@host01 /]# ceph orch apply rgw foo
```

Method 3

Use an arbitrary service name on a labeled set of hosts:

Syntax

ceph orch host label add HOST_NAME_1 LABEL_NAME
ceph orch host label add HOSTNAME_2 LABEL_NAME
ceph orch apply rgw SERVICE_NAME --placement="label:LABEL_NAME count-per-host:NUMBER_OF_DAEMONS" --port=8000

Note

NUMBER_OF_DAEMONS controls the number of Ceph object gateways deployed on each host. To achieve the highest performance without incurring an additional cost, set this value to 2.

Example

[ceph: root@host01 /]# ceph orch host label add host01 rgw  # the 'rgw' label can be anything
[ceph: root@host01 /]# ceph orch host label add host02 rgw
[ceph: root@host01 /]# ceph orch apply rgw foo --placement="label:rgw count-per-host:2" --port=8000

Verification

List the service:
Example
```
[ceph: root@host01 /]# ceph orch ls
```

List the hosts, daemons, and processes:

Syntax

ceph orch ps --daemon_type=DAEMON_NAME

Example

[ceph: root@host01 /]# ceph orch ps --daemon_type=rgw

3.2. Deploying NFS service with Ceph Object Storage backend

You can deploy the NFS service in Ceph Object Gateway using the Ceph Orchestrator.

Prerequisites

A running Red Hat Ceph Storage cluster.
Root-level access to the bootstrapped host.
Hosts are added to the cluster.
All Manager, Monitor, Ceph Object Gateway, and OSD daemons are deployed.

Procedure

Log into the Cephadm shell:
```
[root@host01 ~]# cephadm shell
```

Create a NFS specification file with the relevant data, including the host on which the NFS service needs to be installed:

Example

[root@host01 ~]# cat nfs-conf.yml

service_type: nfs
service_id: nfs-rgw-service
placement:
  hosts: ['host1']
spec:
  port: 2049

Apply the NFS service via the specification file created in step 2:
Example
```
[root@host01 ~]# ceph orch apply -i nfs-conf.yml
```

Verify if the NFS service has been created successfully:

Example

[root@host01 ~]# ceph orch ls --service_name nfs.nfs-rgw-service --service_type nfs

3.3. Deploying the Ceph Object Gateway using the service specification

You can deploy the Ceph Object Gateway using the service specification with either the default or the custom realms, zones, and zone groups.

Prerequisites

A running Red Hat Ceph Storage cluster.
Root-level access to the bootstrapped host.
Hosts are added to the cluster.
All manager, monitor, and OSD daemons are deployed.

Procedure

As a root user, create a specification file:
Example
```
[root@host01 ~]# touch radosgw.yml
```

Edit the radosgw.yml file to include the following details for the default realm, zone, and zone group:

Syntax

service_type: rgw
service_id: REALM_NAME.ZONE_NAME
placement:
  hosts:
  - HOST_NAME_1
  - HOST_NAME_2
  count_per_host: NUMBER_OF_DAEMONS
spec:
  rgw_realm: REALM_NAME
  rgw_zone: ZONE_NAME
  rgw_zonegroup: ZONE_GROUP_NAME
  rgw_frontend_port: FRONT_END_PORT
networks:
  -  NETWORK_CIDR # Ceph Object Gateway service binds to a specific network

Note

NUMBER_OF_DAEMONS controls the number of Ceph Object Gateways deployed on each host. To achieve the highest performance without incurring an additional cost, set this value to 2.

Example

service_type: rgw
service_id: default
placement:
  hosts:
  - host01
  - host02
  - host03
  count_per_host: 2
spec:
  rgw_realm: default
  rgw_zone: default
  rgw_zonegroup: default
  rgw_frontend_port: 1234
networks:
  - 192.169.142.0/24

Optional: For custom realm, zone, and zone group, create the resources and then create the radosgw.yml file:

Create the custom realm, zone, and zone group:

Example

[root@host01 ~]# radosgw-admin realm create --rgw-realm=test_realm --default
[root@host01 ~]# radosgw-admin zonegroup create --rgw-zonegroup=test_zonegroup --default
[root@host01 ~]# radosgw-admin zone create --rgw-zonegroup=test_zonegroup --rgw-zone=test_zone --default
[root@host01 ~]# radosgw-admin period update --rgw-realm=test_realm --commit

Create the radosgw.yml file with the following details:

Example

service_type: rgw
service_id: test_realm.test_zone
placement:
  hosts:
  - host01
  - host02
  - host03
  count_per_host: 2
spec:
  rgw_realm: test_realm
  rgw_zone: test_zone
  rgw_zonegroup: test_zonegroup
  rgw_frontend_port: 1234
networks:
  - 192.169.142.0/24

Mount the radosgw.yml file under a directory in the container:
Example
```
[root@host01 ~]# cephadm shell --mount radosgw.yml:/var/lib/ceph/radosgw/radosgw.yml
```
Note
Every time you exit the shell, you have to mount the file in the container before deploying the daemon.

Deploy the Ceph Object Gateway using the service specification:

Syntax

ceph orch apply -i FILE_NAME.yml

Example

[ceph: root@host01 /]# ceph orch apply -i /var/lib/ceph/radosgw/radosgw.yml

Verification

List the service:
Example
```
[ceph: root@host01 /]# ceph orch ls
```

List the hosts, daemons, and processes:

Syntax

ceph orch ps --daemon_type=DAEMON_NAME

Example

[ceph: root@host01 /]# ceph orch ps --daemon_type=rgw

3.4. Deploying a multi-site Ceph Object Gateway using the Ceph Orchestrator

Ceph Orchestrator supports multi-site configuration options for the Ceph Object Gateway.

You can configure each object gateway to work in an active-active zone configuration allowing writes to a non-primary zone. The multi-site configuration is stored within a container called a realm.

The realm stores zone groups, zones, and a time period. The rgw daemons handle the synchronization eliminating the need for a separate synchronization agent, thereby operating with an active-active configuration.

You can also deploy multi-site zones using the command line interface (CLI).

Note

The following configuration assumes at least two Red Hat Ceph Storage clusters are in geographically separate locations. However, the configuration also works on the same site.

Prerequisites

At least two running Red Hat Ceph Storage clusters.
At least two Ceph Object Gateway instances, one for each Red Hat Ceph Storage cluster.
Root-level access to all the nodes.
Nodes or containers are added to the storage cluster.
All Ceph Manager, Monitor and OSD daemons are deployed.

Procedure

In the cephadm shell, configure the primary zone:

Create a realm:

Syntax

radosgw-admin realm create --rgw-realm=REALM_NAME --default

Example

[ceph: root@host01 /]# radosgw-admin realm create --rgw-realm=test_realm --default

If the storage cluster has a single realm, then specify the --default flag.

Create a primary zone group:

Syntax

radosgw-admin zonegroup create --rgw-zonegroup=ZONE_GROUP_NAME --endpoints=http://RGW_PRIMARY_HOSTNAME:RGW_PRIMARY_PORT_NUMBER_1 --master --default

Example

[ceph: root@host01 /]# radosgw-admin zonegroup create --rgw-zonegroup=us --endpoints=http://rgw1:80 --master --default

Create a primary zone:

Syntax

radosgw-admin zone create --rgw-zonegroup=PRIMARY_ZONE_GROUP_NAME --rgw-zone=PRIMARY_ZONE_NAME --endpoints=http://RGW_PRIMARY_HOSTNAME:RGW_PRIMARY_PORT_NUMBER_1 --access-key=SYSTEM_ACCESS_KEY --secret=SYSTEM_SECRET_KEY

Example

[ceph: root@host01 /]# radosgw-admin zone create --rgw-zonegroup=us --rgw-zone=us-east-1 --endpoints=http://rgw1:80 --access-key=LIPEYZJLTWXRKXS9LPJC --secret-key=IsAje0AVDNXNw48LjMAimpCpI7VaxJYSnfD0FFKQ

Optional: Delete the default zone, zone group, and the associated pools.

Important

Do not delete the default zone and its pools if you are using the default zone and zone group to store data. Also, removing the default zone group deletes the system user.

To access old data in the default zone and zonegroup, use --rgw-zone default and --rgw-zonegroup default in radosgw-admin commands.

Example

[ceph: root@host01 /]# radosgw-admin zonegroup delete --rgw-zonegroup=default
[ceph: root@host01 /]# ceph osd pool rm default.rgw.log default.rgw.log --yes-i-really-really-mean-it
[ceph: root@host01 /]# ceph osd pool rm default.rgw.meta default.rgw.meta --yes-i-really-really-mean-it
[ceph: root@host01 /]# ceph osd pool rm default.rgw.control default.rgw.control --yes-i-really-really-mean-it
[ceph: root@host01 /]# ceph osd pool rm default.rgw.data.root default.rgw.data.root --yes-i-really-really-mean-it
[ceph: root@host01 /]# ceph osd pool rm default.rgw.gc default.rgw.gc --yes-i-really-really-mean-it

Create a system user:

Syntax

radosgw-admin user create --uid=USER_NAME --display-name="USER_NAME" --access-key=SYSTEM_ACCESS_KEY --secret=SYSTEM_SECRET_KEY --system

Example

[ceph: root@host01 /]# radosgw-admin user create --uid=zone.user --display-name="Zone user" --system

Make a note of the access_key and secret_key.

Add the access key and system key to the primary zone:

Syntax

radosgw-admin zone modify --rgw-zone=PRIMARY_ZONE_NAME --access-key=ACCESS_KEY --secret=SECRET_KEY

Example

[ceph: root@host01 /]# radosgw-admin zone modify --rgw-zone=us-east-1 --access-key=NE48APYCAODEPLKBCZVQ--secret=u24GHQWRE3yxxNBnFBzjM4jn14mFIckQ4EKL6LoW

Commit the changes:

Syntax

radosgw-admin period update --commit

Example

[ceph: root@host01 /]# radosgw-admin period update --commit

Outside the cephadm shell, fetch the FSID of the storage cluster and the processes:
Example
```
[root@host01 ~]#  systemctl list-units | grep ceph
```

Start the Ceph Object Gateway daemon:

Syntax

systemctl start ceph-FSID@DAEMON_NAME
systemctl enable ceph-FSID@DAEMON_NAME

Example

[root@host01 ~]# systemctl start ceph-62a081a6-88aa-11eb-a367-001a4a000672@rgw.test_realm.us-east-1.host01.ahdtsw.service
[root@host01 ~]# systemctl enable ceph-62a081a6-88aa-11eb-a367-001a4a000672@rgw.test_realm.us-east-1.host01.ahdtsw.service

In the Cephadm shell, configure the secondary zone.

Pull the primary realm configuration from the host:

Syntax

radosgw-admin realm pull --rgw-realm=PRIMARY_REALM --url=URL_TO_PRIMARY_ZONE_GATEWAY --access-key=ACCESS_KEY --secret-key=SECRET_KEY --default

Example

[ceph: root@host04 /]# radosgw-admin realm pull --rgw-realm=test_realm --url=http://10.74.249.26:80 --access-key=LIPEYZJLTWXRKXS9LPJC --secret-key=IsAje0AVDNXNw48LjMAimpCpI7VaxJYSnfD0FFKQ --default

Pull the primary period configuration from the host:

Syntax

radosgw-admin period pull --url=URL_TO_PRIMARY_ZONE_GATEWAY --access-key=ACCESS_KEY --secret-key=SECRET_KEY

Example

[ceph: root@host04 /]# radosgw-admin period pull --url=http://10.74.249.26:80 --access-key=LIPEYZJLTWXRKXS9LPJC --secret-key=IsAje0AVDNXNw48LjMAimpCpI7VaxJYSnfD0FFKQ

Configure a secondary zone:

Syntax

radosgw-admin zone create --rgw-zonegroup=ZONE_GROUP_NAME \
             --rgw-zone=SECONDARY_ZONE_NAME --endpoints=http://RGW_SECONDARY_HOSTNAME:RGW_PRIMARY_PORT_NUMBER_1 \
             --access-key=SYSTEM_ACCESS_KEY --secret=SYSTEM_SECRET_KEY \
             --endpoints=http://FQDN:80 \
             [--read-only]

Example

[ceph: root@host04 /]# radosgw-admin zone create --rgw-zonegroup=us --rgw-zone=us-east-2 --endpoints=http://rgw2:80 --access-key=LIPEYZJLTWXRKXS9LPJC --secret-key=IsAje0AVDNXNw48LjMAimpCpI7VaxJYSnfD0FFKQ

Optional: Delete the default zone.

Important

Do not delete the default zone and its pools if you are using the default zone and zone group to store data.

To access old data in the default zone and zonegroup, use --rgw-zone default and --rgw-zonegroup default in radosgw-admin commands.

Example

[ceph: root@host04 /]# radosgw-admin zone rm --rgw-zone=default
[ceph: root@host04 /]# ceph osd pool rm default.rgw.log default.rgw.log --yes-i-really-really-mean-it
[ceph: root@host04 /]# ceph osd pool rm default.rgw.meta default.rgw.meta --yes-i-really-really-mean-it
[ceph: root@host04 /]# ceph osd pool rm default.rgw.control default.rgw.control --yes-i-really-really-mean-it
[ceph: root@host04 /]# ceph osd pool rm default.rgw.data.root default.rgw.data.root --yes-i-really-really-mean-it
[ceph: root@host04 /]# ceph osd pool rm default.rgw.gc default.rgw.gc --yes-i-really-really-mean-it

Update the Ceph configuration database:

Syntax

ceph config set SERVICE_NAME rgw_zone SECONDARY_ZONE_NAME

Example

[ceph: root@host04 /]# ceph config set rgw rgw_zone us-east-2

Commit the changes:

Syntax

radosgw-admin period update --commit

Example

[ceph: root@host04 /]# radosgw-admin period update --commit

Outside the Cephadm shell, fetch the FSID of the storage cluster and the processes:
Example
```
[root@host04 ~]#  systemctl list-units | grep ceph
```

Start the Ceph Object Gateway daemon:

Syntax

systemctl start ceph-FSID@DAEMON_NAME
systemctl enable ceph-FSID@DAEMON_NAME

Example

[root@host04 ~]# systemctl start ceph-62a081a6-88aa-11eb-a367-001a4a000672@rgw.test_realm.us-east-2.host04.ahdtsw.service
[root@host04 ~]# systemctl enable ceph-62a081a6-88aa-11eb-a367-001a4a000672@rgw.test_realm.us-east-2.host04.ahdtsw.service

Optional: Deploy multi-site Ceph Object Gateways using the placement specification:

Syntax

ceph orch apply rgw NAME --realm=REALM_NAME --zone=PRIMARY_ZONE_NAME --placement="NUMBER_OF_DAEMONS HOST_NAME_1 HOST_NAME_2"

Example

[ceph: root@host04 /]# ceph orch apply rgw east --realm=test_realm --zone=us-east-1 --placement="2 host01 host02"

Verification

Check the synchronization status to verify the deployment:
Example
```
[ceph: root@host04 /]# radosgw-admin sync status
```

3.5. Removing the Ceph Object Gateway using the Ceph Orchestrator

You can remove the Ceph object gateway daemons using the ceph orch rm command.

Prerequisites

A running Red Hat Ceph Storage cluster.
Root-level access to all the nodes.
Hosts are added to the cluster.
At least one Ceph object gateway daemon deployed on the hosts.

Procedure

Log into the Cephadm shell:
Example
```
[root@host01 ~]# cephadm shell
```
List the service:
Example
```
[ceph: root@host01 /]# ceph orch ls
```

Remove the service:

Syntax

ceph orch rm SERVICE_NAME

Example

[ceph: root@host01 /]# ceph orch rm rgw.test_realm.test_zone_bb

Verification

List the hosts, daemons, and processes:
Syntax
```
ceph orch ps
```
Example
```
[ceph: root@host01 /]# ceph orch ps
```

Additional Resources

See Deploying the Ceph object gateway using the command line interface section in the Red Hat Ceph Storage Operations Guide for more information.
See Deploying the Ceph object gateway using the service specification section in the Red Hat Ceph Storage Operations Guide for more information.

3.6. Using the Ceph Manager `rgw` module

As a storage administrator, you can deploy Ceph Object Gateway, single site and multi-site, using the rgw module. It helps with bootstrapping and configuring Ceph Object realm, zonegroup, and the different related entities.

You can use the available tokens for the newly created or existing realms. This token is a base64 string that encapsulates the realm information and its master zone endpoint authentication data.

In a multi-site configuration, these tokens can be used to pull a realm to create a secondary zone on a different cluster that syncs with the master zone on the primary cluster by using the rgw zone create command.

3.6.1. Deploying Ceph Object Gateway using the `rgw` module

Bootstrapping Ceph Object Gateway realm creates a new realm entity, a new zonegroup, and a new zone. The rgw module instructs the orchestrator to create and deploy the corresponding Ceph Object Gateway daemons.

Enable the rgw module using the ceph mgr module enable rgw command. After enabling the rgw module, either pass the arguments in the command line or use the yaml specification file to bootstrap the realm.

Prerequisites

A running Red Hat Ceph Storage cluster with at least one OSD deployed.

Procedure

Log into the Cephadm shell:
Example
```
[root@host01 ~]# cephadm shell
```

Enable the` rgw`module:

Example

[ceph: root@host01 /]# ceph mgr module enable rgw

Bootstrap the Ceph Object Gateway realm using either the command-line or the yaml specification file:

Option 1: Use the command-line interface:

Syntax

ceph rgw realm bootstrap [--realm name REALM_NAME] [--zonegroup-name ZONEGROUP_NAME] [--zone-name ZONE_NAME] [--port PORT_NUMBER] [--placement HOSTNAME] [--start-radosgw]

Example

[ceph: root@host01 /]# ceph rgw realm bootstrap --realm-name myrealm --zonegroup-name myzonegroup --zone-name myzone --port 5500 --placement="host01 host02" --start-radosgw
Realm(s) created correctly. Please, use 'ceph rgw realm tokens' to get the token.

Option 2: Use the yaml specification file:

As a root user, create the yaml file:

Syntax

rgw_realm: REALM_NAME
rgw_zonegroup: ZONEGROUP_NAME
rgw_zone: ZONE_NAME
placement:
  hosts:
   - _HOSTNAME_1_
   - _HOSTNAME_2_

Example

[root@host01 ~]# cat rgw.yaml

rgw_realm: myrealm
rgw_zonegroup: myzonegroup
rgw_zone: myzone
placement:
  hosts:
   - host01
   - host02

Optional: You can add the hostnames parameter to the zonegroup during realm bootstrap:

Syntax

service_type: rgw
placement:
  hosts:
  - _host1_
  - _host2_
spec:
  rgw_realm: my_realm
  rgw_zonegroup: my_zonegroup
  rgw_zone: my_zone
  zonegroup_hostnames:
  - _hostname1_
  - _hostname2_

Example

service_type: rgw
placement:
  hosts:
  - _host1_
  - _host2_
spec:
  rgw_realm: my_realm
  rgw_zonegroup: my_zonegroup
  rgw_zone: my_zone
  zonegroup_hostnames:
  - foo
  - bar

Mount the YAML file under a directory in the container:

Example

[root@host01 ~]# cephadm shell --mount rgw.yaml:/var/lib/ceph/rgw/rgw.yaml

Bootstrap the realm:
Example
```
[ceph: root@host01 /]# ceph rgw realm bootstrap -i /var/lib/ceph/rgw/rgw.yaml
```
Note
The specification file used by the rgw module has the same format as the one used by the orchestrator. Thus, you can provide any orchestration supported Ceph Object Gateway parameters including advanced configuration features such as SSL certificates.

List the available tokens:

Example

[ceph: root@host01 /]# ceph rgw realm tokens | jq

[
  {
    "realm": "myrealm",
    "token": "ewogICAgInJlYWxtX25hbWUiOiAibXlyZWFsbSIsCiAgICAicmVhbG1faWQiOiAiZDA3YzAwZWYtOTA0MS00ZjZlLTg4MDQtN2Q0MDI0MDU1NmFlIiwKICAgICJlbmRwb2ludCI6ICJodHRwOi8vdm0tMDA6NDMyMSIsCiAgICAiYWNjZXNzX2tleSI6ICI5NTY1VFZSMVFWTExFRzdVNFIxRCIsCiAgICAic2VjcmV0IjogImQ3b0FJQXZrNEdYeXpyd3Q2QVZ6bEZNQmNnRG53RVdMMHFDenE3cjUiCn1="
  }
]

Note

If you run the above command before the Ceph Object Gateway daemons get deployed, it displays a message that there are no tokens as there are no endpoints yet.

Verification

Verify Object Gateway deployment:

Example

[ceph: root@host01 /]# ceph orch list --daemon-type=rgw
NAME                                                                HOST                                    PORTS  STATUS          REFRESHED   AGE  MEM USE  MEM LIM  VERSION          IMAGE ID      CONTAINER ID
rgw.myrealm.myzonegroup.ceph-saya-6-osd-host01.eburst  ceph-saya-6-osd-host01  *:80   running (111m)     9m ago  111m    82.3M        -  17.2.6-22.el9cp  2d5b080de0b0  2f3eaca7e88e

Verify the hostnames added via realm bootstrap:

Syntax

radosgw-admin zonegroup get --rgw-zonegroup _zone_group_name_

Example

[ceph: root@host01 /]# radosgw-admin zonegroup get --rgw-zonegroup my_zonegroup

{
    "id": "02a175e2-7f23-4882-8651-6fbb15d25046",
    "name": "my_zonegroup_ck",
    "api_name": "my_zonegroup_ck",
    "is_master": true,
    "endpoints": [
        "http://vm-00:80"
    ],
    "hostnames": [
        "foo"
        "bar"
    ],
    "hostnames_s3website": [],
    "master_zone": "f42fea84-a89e-4995-996e-61b7223fb0b0",
    "zones": [
        {
            "id": "f42fea84-a89e-4995-996e-61b7223fb0b0",
            "name": "my_zone_ck",
            "endpoints": [
                "http://vm-00:80"
            ],
            "log_meta": false,
            "log_data": false,
            "bucket_index_max_shards": 11,
            "read_only": false,
            "tier_type": "",
            "sync_from_all": true,
            "sync_from": [],
            "redirect_zone": "",
            "supported_features": [
                "compress-encrypted",
                "resharding"
            ]
        }
    ],
    "placement_targets": [
        {
            "name": "default-placement",
            "tags": [],
            "storage_classes": [
                "STANDARD"
            ]
        }
    ],
    "default_placement": "default-placement",
    "realm_id": "439e9c37-4ddc-43a3-99e9-ea1f3825bb51",
    "sync_policy": {
        "groups": []
    },
    "enabled_features": [
        "resharding"
    ]
}

See the hostnames section of the zonegroup for the list of host names specified in zonegroup_hostnames in the Ceph Object Gateway specification file.

3.6.2. Deploying Ceph Object Gateway multi-site using the `rgw` module

Bootstrapping Ceph Object Gateway realm creates a new realm entity, a new zonegroup, and a new zone. It configures a new system user that can be used for multi-site sync operations. The rgw module instructs the orchestrator to create and deploy the corresponding Ceph Object Gateway daemons.

Prerequisites

A running Red Hat Ceph Storage cluster with at least one OSD deployed.

Procedure

Log into the Cephadm shell:
Example
```
[root@host01 ~]# cephadm shell
```

Enable the` rgw`module:

Example

[ceph: root@host01 /]# ceph mgr module enable rgw

Bootstrap the Ceph Object Gateway realm using either the command-line or the yaml specification file:

Option 1: Use the command-line interface:

Syntax

ceph rgw realm bootstrap [--realm name REALM_NAME] [--zonegroup-name ZONEGROUP_NAME] [--zone-name ZONE_NAME] [--port PORT_NUMBER] [--placement HOSTNAME] [--start-radosgw]

Example

[ceph: root@host01 /]# ceph rgw realm bootstrap --realm-name myrealm --zonegroup-name myzonegroup --zone-name myzone --port 5500 --placement="host01 host02" --start-radosgw
Realm(s) created correctly. Please, use 'ceph rgw realm tokens' to get the token.

Option 2: Use the yaml specification file:

As a root user, create the yaml file:

Syntax

rgw_realm: REALM_NAME
rgw_zonegroup: ZONEGROUP_NAME
rgw_zone: ZONE_NAME
placement:
  hosts:
   - HOSTNAME_1
   - HOSTNAME_2
spec:
  rgw_frontend_port: PORT_NUMBER
zone_endpoints: http://RGW_HOSTNAME_1:RGW_PORT_NUMBER_1, http://RGW_HOSTNAME_2:RGW_PORT_NUMBER_2

Example

[root@host01 ~]# cat rgw.yaml

rgw_realm: myrealm
rgw_zonegroup: myzonegroup
rgw_zone: myzone
placement:
  hosts:
   - host01
   - host02
spec:
  rgw_frontend_port: 5500
zone_endpoints: http://<rgw_host1>:<rgw_port1>, http://<rgw_host2>:<rgw_port2>

Mount the YAML file under a directory in the container:

Example

[root@host01 ~]# cephadm shell --mount rgw.yaml:/var/lib/ceph/rgw/rgw.yaml

Bootstrap the realm:
Example
```
[ceph: root@host01 /]# ceph rgw realm bootstrap -i /var/lib/ceph/rgw/rgw.yaml
```
Note
The specification file used by the rgw module has the same format as the one used by the orchestrator. Thus, you can provide any orchestration supported Ceph Object Gateway parameters including advanced configuration features such as SSL certificates.

List the available tokens:

Example

[ceph: root@host01 /]# ceph rgw realm tokens | jq

[
  {
    "realm": "myrealm",
    "token": "ewogICAgInJlYWxtX25hbWUiOiAibXlyZWFsbSIsCiAgICAicmVhbG1faWQiOiAiZDA3YzAwZWYtOTA0MS00ZjZlLTg4MDQtN2Q0MDI0MDU1NmFlIiwKICAgICJlbmRwb2ludCI6ICJodHRwOi8vdm0tMDA6NDMyMSIsCiAgICAiYWNjZXNzX2tleSI6ICI5NTY1VFZSMVFWTExFRzdVNFIxRCIsCiAgICAic2VjcmV0IjogImQ3b0FJQXZrNEdYeXpyd3Q2QVZ6bEZNQmNnRG53RVdMMHFDenE3cjUiCn1="
  }
]

Note

If you run the above command before the Ceph Object Gateway daemons get deployed, it displays a message that there are no tokens as there are no endpoints yet.

Create the secondary zone using these tokens and join the existing realms:

As a root user, create the yaml file:

Example

[root@host01 ~]# cat zone-spec.yaml
rgw_zone: my-secondary-zone
rgw_realm_token: <token>
placement:
  hosts:
   - ceph-node-1
   - ceph-node-2
spec:
  rgw_frontend_port: 5500

Mount the zone-spec.yaml file under a directory in the container:

Example

[root@host01 ~]# cephadm shell --mount zone-spec.yaml:/var/lib/ceph/radosgw/zone-spec.yaml

Enable the` rgw`module on the secondary zone:
Example
```
[ceph: root@host01 /]# ceph mgr module enable rgw
```

Create the secondary zone:

Example

[ceph: root@host01 /]# ceph rgw zone create -i /var/lib/ceph/radosgw/zone-spec.yaml

Verification

Verify Object Gateway multi-site deployment:

Example

[ceph: root@host01 /]# radosgw-admin realm list
{
"default_info": "d07c00ef-9041-4f6e-8804-7d40240556ae",
"realms": [
"myrealm"
]
}

Este conteúdo não está disponível no idioma selecionado.

Chapter 3. Deployment

3.1. Deploying the Ceph Object Gateway using the command line interface

3.2. Deploying NFS service with Ceph Object Storage backend

3.3. Deploying the Ceph Object Gateway using the service specification

3.4. Deploying a multi-site Ceph Object Gateway using the Ceph Orchestrator

3.5. Removing the Ceph Object Gateway using the Ceph Orchestrator

3.6. Using the Ceph Manager `rgw` module

3.6.1. Deploying Ceph Object Gateway using the `rgw` module

3.6.2. Deploying Ceph Object Gateway multi-site using the `rgw` module

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Tornando o open source mais inclusivo

Sobre a Red Hat

Red Hat legal and privacy links

Red Hat legal and privacy links

Este conteúdo não está disponível no idioma selecionado.

Chapter 3. Deployment

3.1. Deploying the Ceph Object Gateway using the command line interface

3.2. Deploying NFS service with Ceph Object Storage backend

3.3. Deploying the Ceph Object Gateway using the service specification

3.4. Deploying a multi-site Ceph Object Gateway using the Ceph Orchestrator

3.5. Removing the Ceph Object Gateway using the Ceph Orchestrator

3.6. Using the Ceph Manager rgw module

3.6.1. Deploying Ceph Object Gateway using the rgw module

3.6.2. Deploying Ceph Object Gateway multi-site using the rgw module

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Tornando o open source mais inclusivo

Sobre a Red Hat

Red Hat legal and privacy links

Red Hat legal and privacy links

3.6. Using the Ceph Manager `rgw` module

3.6.1. Deploying Ceph Object Gateway using the `rgw` module

3.6.2. Deploying Ceph Object Gateway multi-site using the `rgw` module