Red Hat SummitEste conteúdo não está disponível no idioma selecionado.
Chapter 8. RHEL Installations on IBM Power Servers
You can install Red Hat Enterprise Linux on various IBM Power System servers.
8.1. Supported IBM Power Servers
Copiar o linkLink copiado para a área de transferência!
You can install Red Hat Enterprise Linux on IBM Power Systems. You can find the complete list of supported IBM Power servers on the Red Hat Ecosystem Catalog.
8.2. Overview of the installation process on PowerVM LPAR by using the HMC
Copiar o linkLink copiado para a área de transferência!
You can install RHEL on the PowerVM logical partition (LPAR) by using the Hardware Management Console. A Hardware Management Console (HMC) is a hardware appliance that you can use to administer IBM Power Systems servers.
The installation workflow involves the following general steps:
- Download the RHEL installation ISO.
- Prepare a bootable physical installation medium based on your installation method.
- Verify that the Power System is added to the HMC.
- Configure VIOS and LPAR on the managed system or configure full system LPAR based on the requirements.
Log in to the HMC console.
-
Run ssh
hscroot@<HMC_IP_address>to access the LPAR console by using either themkvterm -m <managed_system_name> -p <lpar_name>command or thevtmenuinterface. - Power on the LPAR by using the HMC GUI.
- Optional: Switch to a remote desktop session.
-
Run ssh
- Install Red Hat Enterprise Linux.
- Optional: Install IBM Tools Repository to use Service and Productivity tools, IBM Advance Toolchain for Linux on Power, and IBM SDK for PowerLinux.
8.3. Overview of the installation process on IBM Power Servers with the graphics card
Copiar o linkLink copiado para a área de transferência!
You can install RHEL on IBM Power Systems servers with the graphics card.
The installation workflow involves the following general steps:
- Download the RHEL installation ISO.
- Prepare a bootable physical installation medium based on your installation method.
- Prepare the machine for RHEL installation.
- Boot the installer kernel.
- Install Red Hat Enterprise Linux.
- Optional: Install IBM Tools Repository to use Service and Productivity tools, IBM AdvanceD Toolchain for Linux on Power, and IBM SDK for PowerLinux.
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}