Este conteúdo não está disponível no idioma selecionado.

Chapter 14. Configuring Fibre Channel over Ethernet


Fibre Channel over Ethernet (FCoE), defined by IEEE T11 FC‑BB‑5, encapsulates Fibre Channel frames over Ethernet. It enables convergence of LAN and SAN into a unified network, cutting hardware and energy costs while reducing complexity, provided Ethernet is configured for lossless storage traffic.

14.1. Using hardware FCoE HBAs in RHEL

In RHEL you can use hardware Fibre Channel over Ethernet (FCoE) Host Bus Adapter (HBA), which is supported by qedf and fnic drivers. If you use such a HBA, you configure the FCoE settings in the setup of the HBA. For more information, see the documentation of the adapter.

After you configure the HBA, the exported Logical Unit Numbers (LUN) from the Storage Area Network (SAN) are automatically available to RHEL as /dev/sd* devices. You can use these devices similar to local storage devices.

Voltar ao topo
Red Hat logoGithubredditYoutubeTwitter

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Ajudamos os usuários da Red Hat a inovar e atingir seus objetivos com nossos produtos e serviços com conteúdo em que podem confiar. Explore nossas atualizações recentes.

Tornando o open source mais inclusivo

A Red Hat está comprometida em substituir a linguagem problemática em nosso código, documentação e propriedades da web. Para mais detalhes veja o Blog da Red Hat.

Sobre a Red Hat

Fornecemos soluções robustas que facilitam o trabalho das empresas em plataformas e ambientes, desde o data center principal até a borda da rede.

Theme

© 2025 Red Hat