5.4.16.4. Converting a Mirrored LVM Device to a RAID1 Device
You can convert an existing mirrored LVM device to a RAID1 LVM device with the
lvconvert command by specifying the --type raid1 argument. This renames the mirror subvolumes (*_mimage_*) to RAID subvolumes (*_rimage_*). In addition, the mirror log is removed and metadata subvolumes (*_rmeta_*) are created for the data subvolumes on the same physical volumes as the corresponding data subvolumes.
The following example shows the layout of a mirrored logical volume
my_vg/my_lv.
# lvs -a -o name,copy_percent,devices my_vg
LV Copy% Devices
my_lv 15.20 my_lv_mimage_0(0),my_lv_mimage_1(0)
[my_lv_mimage_0] /dev/sde1(0)
[my_lv_mimage_1] /dev/sdf1(0)
[my_lv_mlog] /dev/sdd1(0)
The following command converts the mirrored logical volume
my_vg/my_lv to a RAID1 logical volume.
#lvconvert --type raid1 my_vg/my_lv#lvs -a -o name,copy_percent,devices my_vgLV Copy% Devices my_lv 100.00 my_lv_rimage_0(0),my_lv_rimage_1(0) [my_lv_rimage_0] /dev/sde1(0) [my_lv_rimage_1] /dev/sdf1(0) [my_lv_rmeta_0] /dev/sde1(125) [my_lv_rmeta_1] /dev/sdf1(125)
