Este conteúdo não está disponível no idioma selecionado.
8.2. Mounting an XFS File System
An XFS file system can be mounted with no extra options, for example:
# mount /dev/device /mount/point
XFS also supports several mount options to influence behavior.
XFS allocates inodes to reflect their on-disk location by default. However, because some 32-bit userspace applications are not compatible with inode numbers greater than 232, XFS will allocate all inodes in disk locations which result in 32-bit inode numbers. This can lead to decreased performance on very large filesystems (that is, larger than 2 terabytes), because inodes are skewed to the beginning of the block device, while data is skewed towards the end.
To address this, use the
inode64 mount option. This option configures XFS to allocate inodes and data across the entire file system, which can improve performance:
# mount -o inode64 /dev/device /mount/pointWrite Barriers
By default, XFS uses write barriers to ensure file system integrity even when power is lost to a device with write caches enabled. For devices without write caches, or with battery-backed write caches, disable the barriers by using the
nobarrier option:
# mount -o nobarrier /dev/device /mount/point
For more information about write barriers, refer to Chapter 22, Write Barriers.
