Este conteúdo não está disponível no idioma selecionado.
9.3. Configuring a Virtual Domain as a Resource
You can configure a virtual domain that is managed by the
libvirt virtualization framework as a cluster resource with the pcs resource create command, specifying VirtualDomain as the resource type.
When configuring a virtual domain as a resource, take the following considerations into account:
- A virtual domain should be stopped before you configure it as a cluster resource.
- Once a virtual domain is a cluster resource, it should not be started, stopped, or migrated except through the cluster tools.
- Do not configure a virtual domain that you have configured as a cluster resource to start when its host boots.
- All nodes must have access to the necessary configuration files and storage devices for each managed virtual domain.
If you want the cluster to manage services within the virtual domain itself, you can configure the virtual domain as a guest node. For information on configuring guest nodes, see Section 9.4, “The pacemaker_remote Service”
For information on configuring virtual domains, see the Virtualization Deployment and Administration Guide.
Table 9.3, “Resource Options for Virtual Domain Resources” describes the resource options you can configure for a
VirtualDomain resource.
| Field | Default | Description |
|---|---|---|
config
| |
(required) Absolute path to the
libvirt configuration file for this virtual domain.
|
hypervisor
|
System dependent
|
Hypervisor URI to connect to. You can determine the system's default URI by running the
virsh --quiet uri command.
|
force_stop
| 0
|
Always forcefully shut down ("destroy") the domain on stop. The default behavior is to resort to a forceful shutdown only after a graceful shutdown attempt has failed. You should set this to
true only if your virtual domain (or your virtualization back end) does not support graceful shutdown.
|
migration_transport
|
System dependent
|
Transport used to connect to the remote hypervisor while migrating. If this parameter is omitted, the resource will use
libvirt's default transport to connect to the remote hypervisor.
|
migration_network_suffix
| |
Use a dedicated migration network. The migration URI is composed by adding this parameter's value to the end of the node name. If the node name is a fully qualified domain name (FQDN), insert the suffix immediately prior to the first period (.) in the FQDN. Ensure that this composed host name is locally resolvable and the associated IP address is reachable through the favored network.
|
monitor_scripts
| |
To additionally monitor services within the virtual domain, add this parameter with a list of scripts to monitor. Note: When monitor scripts are used, the
start and migrate_from operations will complete only when all monitor scripts have completed successfully. Be sure to set the timeout of these operations to accommodate this delay
|
autoset_utilization_cpu
| true
|
If set to
true, the agent will detect the number of domainU's vCPUs from virsh, and put it into the CPU utilization of the resource when the monitor is executed.
|
autoset_utilization_hv_memory
| true
|
If set it true, the agent will detect the number of
Max memory from virsh, and put it into the hv_memory utilization of the source when the monitor is executed.
|
migrateport
|
random highport
|
This port will be used in the
qemu migrate URI. If unset, the port will be a random highport.
|
snapshot
| |
Path to the snapshot directory where the virtual machine image will be stored. When this parameter is set, the virtual machine's RAM state will be saved to a file in the snapshot directory when stopped. If on start a state file is present for the domain, the domain will be restored to the same state it was in right before it stopped last. This option is incompatible with the
force_stop option.
|
In addition to the
VirtualDomain resource options, you can configure the allow-migrate metadata option to allow live migration of the resource to another node. When this option is set to true, the resource can be migrated without loss of state. When this option is set to false, which is the default state, the virtual domain will be shut down on the first node and then restarted on the second node when it is moved from one node to the other.
Use the following procedure to create a
VirtualDomain resource:
- To create the
VirtualDomainresource agent for the management of the virtual machine, Pacemaker requires the virtual machine's xml config file to be dumped to a file on disk. For example, if you created a virtual machine namedguest1, dump the xml to a file somewhere on the host. You can use a file name of your choosing; this example uses/etc/pacemaker/guest1.xml.#
virsh dumpxml guest1 > /etc/pacemaker/guest1.xml - If it is running, shut down the guest node. Pacemaker will start the node when it is configured in the cluster.
- Configure the
VirtualDomanresource with thepcs resource createcommand. For example, The following command configures aVirtualDomainresource namedVM. Since theallow-migrateoption is set totrueapcs resource move VM nodeXcommand would be done as a live migration.# pcs resource create VM VirtualDomain config=.../vm.xml \ migration_transport=ssh meta allow-migrate=true
