Este conteúdo não está disponível no idioma selecionado.

Chapter 4. Verifying OpenShift Data Foundation deployment


Use this section to verify that OpenShift Data Foundation is deployed correctly.

4.1. Verifying the state of the pods

Procedure

  1. Click Workloads Pods from the OpenShift Web Console.
  2. Select openshift-storage from the Project drop-down list.

    Note

    If the Show default projects option is disabled, use the toggle button to list all the default projects.

    For more information on the expected number of pods for each component and how it varies depending on the number of nodes, see the following table:

  1. Set filter for Running and Completed pods to verify that the following pods are in Running and Completed state:

    Note

    The available pods depend on the cluster configuration. When the cluster is deployed as a standalone Multicloud Object Gateway, the rook-ceph-operator-* pods are not available. Similarly, when the cluster is deployed without the Multicloud Object Gateway, noobaa-* pods are not available.

Expand

Component

Corresponding pods

OpenShift Data Foundation Operator

  • ocs-operator-* (1 pod on any storage node)
  • ocs-metrics-exporter-* (1 pod on any storage node)
  • odf-operator-controller-manager-* (1 pod on any storage node)
  • odf-console-* (1 pod on any storage node)
  • csi-addons-controller-manager-* (1 pod on any storage node)

Rook-ceph Operator

rook-ceph-operator-*

(1 pod on any storage node)

Multicloud Object Gateway

  • noobaa-operator-* (1 pod on any storage node)
  • noobaa-core-* (1 pod on any storage node)
  • noobaa-db-pg-cluster-1 and noobaa-db-pg-cluster-2 (2 instances of MCG DB pod on any storage node)
  • noobaa-endpoint-* (1 pod on any storage node)
  • cnpg-controller-manager-* (1 pod on any storage node)

MON

rook-ceph-mon-*

(3 pods distributed across storage nodes)

MGR

rook-ceph-mgr-*

(2 pods on different storage nodes, one active, one standby)

MDS

rook-ceph-mds-ocs-storagecluster-cephfilesystem-*

(2 pods distributed across storage nodes)

RGW

rook-ceph-rgw-ocs-storagecluster-cephobjectstore-* (1 pod on any storage node)

CSI

  • cephfs

    • openshift-storage.cephfs.csi.ceph.com-ctrlplugin-* (2 pods distributed across storage nodes)
    • openshift-storage.cephfs.csi.ceph.com-nodeplugin-* (1 pod on each storage node)
  • nfs

    • openshift-storage.nfs.csi.ceph.com-ctrlplugin-* (2 pods distributed across storage nodes)
    • openshift-storage.nfs.csi.ceph.com-nodeplugin-* (1 pod on each storage node)
  • rbd

    • openshift-storage.rbd.csi.ceph.com-ctrlplugin-* (2 pods distributed across storage nodes)
    • openshift-storage.rbd.csi.ceph.com-nodeplugin-* (1 pod on each storage node)

rook-ceph-crashcollector

rook-ceph-crashcollector-*

(1 pod on each storage node)

OSD

  • rook-ceph-osd-* (1 pod for each device)
  • rook-ceph-osd-prepare-ocs-* (1 pod for each device)

4.2. Verifying the OpenShift Data Foundation cluster is healthy

Procedure

  1. In the OpenShift Web Console, click Storage Data Foundation.
  2. In the Status card of the Overview tab, click Storage System and then click the storage system link from the pop up that appears.
  3. In the Status card of the Block and File tab, verify that the Storage Cluster has a green tick.
  4. In the Details card, verify that the cluster information is displayed.

For more information on the health of the OpenShift Data Foundation cluster using the Block and File dashboard, see Monitoring OpenShift Data Foundation.

4.3. Verifying the Multicloud Object Gateway is healthy

Procedure

  1. In the OpenShift Web Console, click Storage Data Foundation.
  2. In the Status card of the Overview tab, click Storage System and then click the storage system link from the pop up that appears.

    1. In the Status card of the Object tab, verify that both Object Service and Data Resiliency have a green tick.
    2. In the Details card, verify that the MCG information is displayed.

For more information on the health of the OpenShift Data Foundation cluster using the object service dashboard, see Monitoring OpenShift Data Foundation.

Important

To avoid data loss, it is recommended to take a backup of NooBaa DB PVC regularly. If NooBaa DB fails and cannot be recovered, then you can revert to the latest backed-up version. For instructions on backing up your NooBaa DB, follow the steps in the knowledgebase article, Perform a One-Time Backup of the Database for the Multicloud Object Gateway.

4.4. Verifying that the specific storage classes exist

Procedure

  1. Click Storage Storage Classes from the left pane of the OpenShift Web Console.
  2. Verify that the following storage classes are created with the OpenShift Data Foundation cluster creation:

    • ocs-storagecluster-ceph-rbd
    • ocs-storagecluster-cephfs
    • openshift-storage.noobaa.io
    • ocs-storagecluster-ceph-rgw
Red Hat logoGithubredditYoutubeTwitter

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Ajudamos os usuários da Red Hat a inovar e atingir seus objetivos com nossos produtos e serviços com conteúdo em que podem confiar. Explore nossas atualizações recentes.

Tornando o open source mais inclusivo

A Red Hat está comprometida em substituir a linguagem problemática em nosso código, documentação e propriedades da web. Para mais detalhes veja o Blog da Red Hat.

Sobre a Red Hat

Fornecemos soluções robustas que facilitam o trabalho das empresas em plataformas e ambientes, desde o data center principal até a borda da rede.

Theme

© 2026 Red Hat
Voltar ao topo