Red Hat Summit Red Hat SummitSuporteConsoleDesenvolvedoresComeçar um testeContato

Este conteúdo não está disponível no idioma selecionado.

Chapter 3. Customizing configurations in the TektonConfig custom resource

In Red Hat OpenShift Pipelines, you can customize the following configurations by using the TektonConfig custom resource (CR):

  • Optimizing OpenShift Pipelines performance, including high-availability mode for the OpenShift Pipelines controller
  • Configuring the Red Hat OpenShift Pipelines control plane
  • Changing the default service account
  • Disabling the service monitor
  • Configuring pipeline resolvers
  • Disabling cluster tasks and pipeline templates
  • Disabling the integration of Tekton Hub
  • Disabling the automatic creation of RBAC resources
  • Pruning of task runs and pipeline runs

3.1. Prerequisites
Copiar o link

  • You have installed the Red Hat OpenShift Pipelines Operator.

3.2. Performance tuning using TektonConfig CR
Copiar o link

You can modify the fields under the .spec.pipeline.performance parameter in the TektonConfig custom resource (CR) to change high availability (HA) support and performance configuration for the OpenShift Pipelines controller.

Example TektonConfig performance fields

apiVersion: operator.tekton.dev/v1alpha1
kind: TektonConfig
metadata:
  name: config
spec:
  pipeline:
    performance:
      disable-ha: false
      buckets: 7
      replicas: 5
      threads-per-controller: 2
      kube-api-qps: 5.0
      kube-api-burst: 10
Copy to Clipboard Toggle word wrap

All fields are optional. If you set them, the Red Hat OpenShift Pipelines Operator includes most of the fields as arguments in the openshift-pipelines-controller deployment under the openshift-pipelines-controller container. The OpenShift Pipelines Operator also updates the buckets field in the config-leader-election configuration map under the openshift-pipelines namespace.

If you do not specify the values, the OpenShift Pipelines Operator does not update those fields and applies the default values for the OpenShift Pipelines controller.

Note

If you modify or remove any of the performance fields, the OpenShift Pipelines Operator updates the openshift-pipelines-controller deployment and the config-leader-election configuration map (if the buckets field changed) and re-creates openshift-pipelines-controller pods.

High-availability (HA) mode applies to the OpenShift Pipelines controller, which creates and starts pods based on pipeline run and task run definitions. Without HA mode, a single pod executes these operations, potentially creating significant delays under a high load.

In HA mode, OpenShift Pipelines uses several pods (replicas) to execute these operations. Initially, OpenShift Pipelines assigns every controller operation into a bucket. Each replica picks operations from one or more buckets. If two replicas could pick the same operation at the same time, the controller internally determines a leader that executes this operation.

HA mode does not affect execution of task runs after the pods are created.

Expand
Table 3.1. Modifiable fields for tuning OpenShift Pipelines performance
NameDescriptionDefault value for the OpenShift Pipelines controller

disable-ha

Enable or disable the high availability (HA) mode. By default, the HA mode is enabled.

false

buckets

In HA mode, the number of buckets used to process controller operations. The maximum value is 10

1

replicas

In HA mode, the number of pods created to process controller operations. Set this value to the same or lower number than the buckets value.

1

threads-per-controller

The number of threads (workers) to use when the work queue of the OpenShift Pipelines controller is processed.

2

kube-api-qps

The maximum queries per second (QPS) to the cluster master from the REST client.

5.0

kube-api-burst

The maximum burst for a throttle.

10

Note

The OpenShift Pipelines Operator does not control the number of replicas of the OpenShift Pipelines controller. The replicas setting of the deployment determines the number of replicas. For example, to change the number of replicas to 3, enter the following command: 

$ oc --namespace openshift-pipelines scale deployment openshift-pipelines-controller --replicas=3
Copy to Clipboard Toggle word wrap
Important

The kube-api-qps and kube-api-burst fields are multiplied by 2 in the OpenShift Pipelines controller. For example, if the kube-api-qps and kube-api-burst values are 10, the actual QPS and burst values become 20.

3.3. Configuring the Red Hat OpenShift Pipelines control plane
Copiar o link

You can customize the OpenShift Pipelines control plane by editing the configuration fields in the TektonConfig custom resource (CR). The Red Hat OpenShift Pipelines Operator automatically adds the configuration fields with their default values so that you can use the OpenShift Pipelines control plane.

Procedure

  1. In the Administrator perspective of the web console, navigate to Administration CustomResourceDefinitions.
  2. Use the Search by name box to search for the tektonconfigs.operator.tekton.dev custom resource definition (CRD). Click TektonConfig to see the CRD details page.
  3. Click the Instances tab.
  4. Click the config instance to see the TektonConfig CR details.
  5. Click the YAML tab.

  6. Edit the TektonConfig YAML file based on your requirements.

    Example of TektonConfig CR with default values

    apiVersion: operator.tekton.dev/v1alpha1
kind: TektonConfig
metadata:
  name: config
spec:
  pipeline:
    running-in-environment-with-injected-sidecars: true
    metrics.taskrun.duration-type: histogram
    metrics.pipelinerun.duration-type: histogram
    await-sidecar-readiness: true
    params:
      - name: enableMetrics
        value: 'true'
    default-service-account: pipeline
    require-git-ssh-secret-known-hosts: false
    enable-tekton-oci-bundles: false
    metrics.taskrun.level: task
    metrics.pipelinerun.level: pipeline
    enable-api-fields: stable
    enable-provenance-in-status: false
    enable-custom-tasks: true
    disable-creds-init: false
    disable-affinity-assistant: true
    Copy to Clipboard Toggle word wrap

3.3.1. Modifiable fields with default values
Copiar o link

The following list includes all modifiable fields with their default values in the TektonConfig CR:

  • running-in-environment-with-injected-sidecars (default: true): Set this field to false if pipelines run in a cluster that does not use injected sidecars, such as Istio. Setting it to false decreases the time a pipeline takes for a task run to start.

    Note

    For clusters that use injected sidecars, setting this field to false can lead to an unexpected behavior.

  • await-sidecar-readiness (default: true): Set this field to false to stop OpenShift Pipelines from waiting for TaskRun sidecar containers to run before it begins to operate. This allows tasks to be run in environments that do not support the downwardAPI volume type.
  • default-service-account (default: pipeline): This field contains the default service account name to use for the TaskRun and PipelineRun resources, if none is specified.

  • require-git-ssh-secret-known-hosts (default: false): Setting this field to true requires that any Git SSH secret must include the known_hosts field.

    • For more information about configuring Git SSH secrets, see Configuring SSH authentication for Git in the Additional resources section.
  • enable-tekton-oci-bundles (default: false): Set this field to true to enable the use of an experimental alpha feature named Tekton OCI bundle.

  • enable-api-fields (default: stable): Setting this field determines which features are enabled. Acceptable value is stable, beta, or alpha.

    Note

    Red Hat OpenShift Pipelines does not support the alpha value.

  • enable-provenance-in-status (default: false): Set this field to true to enable populating the provenance field in TaskRun and PipelineRun statuses. The provenance field contains metadata about resources used in the task run and pipeline run, such as the source from where a remote task or pipeline definition was fetched.
  • enable-custom-tasks (default: true): Set this field to false to disable the use of custom tasks in pipelines.
  • disable-creds-init (default: false): Set this field to true to prevent OpenShift Pipelines from scanning attached service accounts and injecting any credentials into your steps.
  • disable-affinity-assistant (default: true): Set this field to false to enable affinity assistant for each TaskRun resource sharing a persistent volume claim workspace.

Metrics options

You can modify the default values of the following metrics fields in the TektonConfig CR:

  • metrics.taskrun.duration-type and metrics.pipelinerun.duration-type (default: histogram): Setting these fields determines the duration type for a task or pipeline run. Acceptable value is gauge or histogram.
  • metrics.taskrun.level (default: task): This field determines the level of the task run metrics. Acceptable value is taskrun, task, or namespace.
  • metrics.pipelinerun.level (default: pipeline): This field determines the level of the pipeline run metrics. Acceptable value is pipelinerun, pipeline, or namespace.

3.3.2. Optional configuration fields
Copiar o link

The following fields do not have a default value, and are considered only if you configure them. By default, the Operator does not add and configure these fields in the TektonConfig custom resource (CR).

  • default-timeout-minutes: This field sets the default timeout for the TaskRun and PipelineRun resources, if none is specified when creating them. If a task run or pipeline run takes more time than the set number of minutes for its execution, then the task run or pipeline run is timed out and cancelled. For example, default-timeout-minutes: 60 sets 60 minutes as default.
  • default-managed-by-label-value: This field contains the default value given to the app.kubernetes.io/managed-by label that is applied to all TaskRun pods, if none is specified. For example, default-managed-by-label-value: tekton-pipelines.
  • default-pod-template: This field sets the default TaskRun and PipelineRun pod templates, if none is specified.
  • default-cloud-events-sink: This field sets the default CloudEvents sink that is used for the TaskRun and PipelineRun resources, if none is specified.
  • default-task-run-workspace-binding: This field contains the default workspace configuration for the workspaces that a Task resource declares, but a TaskRun resource does not explicitly declare.
  • default-affinity-assistant-pod-template: This field sets the default PipelineRun pod template that is used for affinity assistant pods, if none is specified.
  • default-max-matrix-combinations-count: This field contains the default maximum number of combinations generated from a matrix, if none is specified.

3.4. Changing the default service account for OpenShift Pipelines
Copiar o link

You can change the default service account for OpenShift Pipelines by editing the default-service-account field in the .spec.pipeline and .spec.trigger specifications. The default service account name is pipeline.

Example

apiVersion: operator.tekton.dev/v1alpha1
kind: TektonConfig
metadata:
  name: config
spec:
  pipeline:
    default-service-account: pipeline
  trigger:
    default-service-account: pipeline
    enable-api-fields: stable
Copy to Clipboard Toggle word wrap

You can set labels and annotations for the openshift-pipelines namespace in which the operator installs OpenShift Pipelines.

Note

Changing the name of the openshift-pipelines namespace is not supported.

Specify the labels and annotations by adding them to the spec.targetNamespaceMetadata specification in the TektonConfig custom resource (CR).

Example of setting labels and annotations for the openshift-pipelines namespace

apiVersion: operator.tekton.dev/v1
kind: TektonConfig
metadata:
  name: config
spec:
  targetNamespaceMetadata:
    labels: {"example-label":"example-value"}
    annotations: {"example-annotation":"example-value"}
Copy to Clipboard Toggle word wrap

3.6. Setting the resync period for the pipelines controller
Copiar o link

You can configure the resync period for the pipelines controller. Once every resync period, the controller reconciles all pipeline runs and task runs, regardless of events.

The default resync period is 10 hours. If you have a large number of pipeline runs and task runs, a full reconciliation every 10 hours might consume too many resources. In this case, you can configure a longer resync period.

Prerequisites

  • You are logged in to your OpenShift Container Platform cluster with cluster-admin privileges.

Procedure

  • In the TektonConfig custom resource, configure the resync period for the pipelines controller, as shown in the following example.

    Example

    apiVersion: operator.tekton.dev/v1alpha1
kind: TektonConfig
metadata:
  name: config
spec:
  pipeline:
    options:
      deployments:
        tekton-pipelines-controller:
          spec:
            template:
              spec:
                containers:
                - name: tekton-pipelines-controller
                  args:
                    - "-resync-period=24h"
    1
    Copy to Clipboard Toggle word wrap

    1
    This example sets the resync period to 24 hours.

3.7. Disabling the service monitor
Copiar o link

You can disable the service monitor, which is part of OpenShift Pipelines, to expose the telemetry data. To disable the service monitor, set the enableMetrics parameter to false in the .spec.pipeline specification of the TektonConfig custom resource (CR):

Example

apiVersion: operator.tekton.dev/v1alpha1
kind: TektonConfig
metadata:
  name: config
spec:
  pipeline:
    params:
       - name: enableMetrics
         value: 'false'
Copy to Clipboard Toggle word wrap

3.8. Configuring pipeline resolvers
Copiar o link

You can configure pipeline resolvers in the TektonConfig custom resource (CR). You can enable or disable these pipeline resolvers:

  • enable-bundles-resolver
  • enable-cluster-resolver
  • enable-git-resolver
  • enable-hub-resolver

Example

apiVersion: operator.tekton.dev/v1alpha1
kind: TektonConfig
metadata:
  name: config
spec:
  pipeline:
    enable-bundles-resolver: true
    enable-cluster-resolver: true
    enable-git-resolver: true
    enable-hub-resolver: true
Copy to Clipboard Toggle word wrap

You can also provide resolver specific configurations in the TektonConfig CR. For example, define the following fields in the map[string]string format to set configurations for each pipeline resolver:

Example

apiVersion: operator.tekton.dev/v1alpha1
kind: TektonConfig
metadata:
  name: config
spec:
  pipeline:
    bundles-resolver-config:
      default-service-account: pipelines
    cluster-resolver-config:
      default-namespace: test
    git-resolver-config:
      server-url: localhost.com
    hub-resolver-config:
      default-tekton-hub-catalog: tekton
Copy to Clipboard Toggle word wrap

3.9. Disabling cluster tasks and pipeline templates
Copiar o link

By default, the TektonAddon custom resource (CR) installs clusterTasks and pipelineTemplates resources along with OpenShift Pipelines on the cluster.

You can disable installation of the clusterTasks and pipelineTemplates resources by setting the parameter value to false in the .spec.addon specification. In addition, you can disable the communityClusterTasks parameter.

Example

apiVersion: operator.tekton.dev/v1alpha1
kind: TektonConfig
metadata:
  name: config
spec:
  addon:
    params:
      - name: clusterTasks
        value: 'false'
      - name: pipelineTemplates
        value: 'false'
      - name: communityClusterTasks
        value: 'true'
Copy to Clipboard Toggle word wrap

Important

In Red Hat OpenShift Pipelines 1.10, ClusterTask functionality is deprecated and is planned to be removed in a future release.

3.10. Disabling the integration of Tekton Hub
Copiar o link

You can disable the integration of Tekton Hub in the web console Developer perspective by setting the enable-devconsole-integration parameter to false in the TektonConfig custom resource (CR).

Example of disabling Tekton Hub

apiVersion: operator.tekton.dev/v1alpha1
kind: TektonConfig
metadata:
  name: config
spec:
  hub:
    params:
      - name: enable-devconsole-integration
        value: false
Copy to Clipboard Toggle word wrap

3.11. Disabling the automatic creation of RBAC resources
Copiar o link

The default installation of the Red Hat OpenShift Pipelines Operator creates multiple role-based access control (RBAC) resources for all namespaces in the cluster, except the namespaces matching the ^(openshift|kube)-* regular expression pattern. Among these RBAC resources, the pipelines-scc-rolebinding security context constraint (SCC) role binding resource is a potential security issue, because the associated pipelines-scc SCC has the RunAsAny privilege.

To disable the automatic creation of cluster-wide RBAC resources after the Red Hat OpenShift Pipelines Operator is installed, cluster administrators can set the createRbacResource parameter to false in the cluster-level TektonConfig custom resource (CR).

Example TektonConfig CR

apiVersion: operator.tekton.dev/v1alpha1
kind: TektonConfig
metadata:
  name: config
spec:
  params:
  - name: createRbacResource
    value: "false"
...
Copy to Clipboard Toggle word wrap

Warning

As a cluster administrator or an user with appropriate privileges, when you disable the automatic creation of RBAC resources for all namespaces, the default ClusterTask resource does not work. For the ClusterTask resource to function, you must create the RBAC resources manually for each intended namespace.

3.12. Disabling inline specification of pipelines and tasks
Copiar o link

By default, OpenShift Pipelines supports inline specification of pipelines and tasks in the following cases:

  • You can create a Pipeline CR that includes one or more task specifications, as in the following example:

    Example of an inline specification in a Pipeline CR

    apiVersion: operator.tekton.dev/v1
kind: Pipeline
metadata:
  name: pipelineInline
spec:
  tasks:
    taskSpec:
# ...
    Copy to Clipboard Toggle word wrap

  • You can create a PipelineRun custom resource (CR) that includes a pipeline specification, as in the following example:

    Example of an inline specification in a PipelineRun CR

    apiVersion: operator.tekton.dev/v1
kind: PipelineRun
metadata:
  name: pipelineRunInline
spec:
  pipelineSpec:
    tasks:
# ...
    Copy to Clipboard Toggle word wrap

  • You can create a TaskRun custom resource (CR) that includes a task specification, as in the following example:

    Example of an inline specification in a TaskRun CR

    apiVersion: operator.tekton.dev/v1
kind: TaskRun
metadata:
  name: taskRunInline
spec:
  taskSpec:
    steps:
# ...
    Copy to Clipboard Toggle word wrap

You can disable inline specification in some or all of these cases. To disable the inline specification, set the disable-inline-spec field of the .spec.pipeline specification of the TektonConfig CR, as in the following example:

Example configuration that disables inline specification

apiVersion: operator.tekton.dev/v1alpha1
kind: TektonConfig
metadata:
  name: config
spec:
  pipeline:
    disable-inline-spec: "pipeline,pipelinerun,taskrun"
# ...
Copy to Clipboard Toggle word wrap

You can set the disable-inline-spec parameter to any single value or to a comma-separated list of multiple values. The following values for the parameter are valid:

Expand
Table 3.2. Supported values for the disable-inline-spec parameter
ValueDescription

pipeline

You cannot use a taskSpec: spec to define a task inside a Pipeline CR. Instead, you must use a taskRef: spec to incorporate a task from a Task CR or to specify a task using a resolver.

pipelinerun

You cannot use a pipelineSpec: spec to define a pipeline inside a PipelineRun CR. Instead, you must use a pipelineRef: spec to incorporate a pipeline from a Pipeline CR or to specify a pipeline using a resolver.

taskrun

You cannot use a taskSpec: spec to define a task inside a TaskRun CR. Instead, you must use a taskRef: spec to incorporate a task from a Task CR or to specify a task using a resolver.

3.13. Automatic pruning of task runs and pipeline runs
Copiar o link

Stale TaskRun and PipelineRun objects and their executed instances occupy physical resources that can be used for active runs. For optimal utilization of these resources, Red Hat OpenShift Pipelines provides a pruner component that automatically removes unused objects and their instances in various namespaces.

Note

You can configure the pruner for your entire installation by using the TektonConfig custom resource and modify configuration for a namespace by using namespace annotations. However, you cannot selectively auto-prune an individual task run or pipeline run in a namespace.

3.13.1. Configuring the pruner
Copiar o link

You can use the TektonConfig custom resource to configure periodic pruning of resources associated with pipeline runs and task runs.

The following example corresponds to the default configuration:

Example of the pruner configuration

apiVersion: operator.tekton.dev/v1alpha1
kind: TektonConfig
metadata:
  name: config
# ...
spec:
  pruner:
    resources:
      - taskrun
      - pipelinerun
    keep: 100
    prune-per-resource: false
    schedule: "* 8 * * *"
    startingDeadlineSeconds: 60
# ...
Copy to Clipboard Toggle word wrap

Expand
Table 3.3. Supported parameters for pruner configuration
ParameterDescription

schedule

The Cron schedule for running the pruner process. The default schedule runs the process at 08:00 every day. For more information about the Cron schedule syntax, see Cron schedule syntax in the Kubernetes documentation.

resources

The resource types to which the pruner applies. The available resource types are taskrun and pipelinerun

keep

The number of most recent resources of every type to keep.

prune-per-resource

If set to false, the value for the keep parameter denotes the total number of task runs or pipeline runs. For example, if keep is set to 100, then the pruner keeps 100 most recent task runs and 100 most recent pipeline runs and removes all other resources.

If set to true, the value for the keep parameter is calculated separately for pipeline runs referencing each pipeline and for task runs referencing each task. For example, if keep is set to 100, then the pruner keeps 100 most recent pipeline runs for Pipeline1, 100 most recent pipeline runs for Pipeline2, 100 most recent task runs for Task1, and so on, and removes all other resources.

keep-since

The maximum time for which to keep resources, in minutes. For example, to retain resources which were created not more than five days ago, set keep-since to 7200.

startingDeadlineSeconds

This parameter is optional. If the pruner job is not started at the scheduled time for any reason, this setting configures the maximum time, in seconds, in which the job can still be started. If the job is not started within the specified time, OpenShift Pipelines considers this job failed and starts the pruner at the next scheduled time. If you do not specify this parameter and the pruner job does not start at the scheduled time, OpenShift Pipelines attempts to start the job at any later time possible.

Note

The keep and keep-since parameters are mutually exclusive. Use only one of them in your configuration.

3.13.2. Annotations for automatically pruning task runs and pipeline runs
Copiar o link

To modify the configuration for automatic pruning of task runs and pipeline runs in a namespace, you can set annotations in the namespace.

The following namespace annotations have the same meanings as the corresponding keys in the TektonConfig custom resource:

  • operator.tekton.dev/prune.schedule
  • operator.tekton.dev/prune.resources
  • operator.tekton.dev/prune.keep
  • operator.tekton.dev/prune.prune-per-resource
  • operator.tekton.dev/prune.keep-since
Note

The operator.tekton.dev/prune.resources annotation accepts a comma-separated list. To prune both task runs and pipeline runs, set this annotation to "taskrun, pipelinerun".

The following additional namespace annotations are available:

  • operator.tekton.dev/prune.skip: When set to true, the namespace for which the annotation is configured is not pruned.
  • operator.tekton.dev/prune.strategy: Set the value of this annotation to either keep or keep-since.

For example, the following annotations retain all task runs and pipeline runs created in the last five days and delete the older resources:

Example of auto-pruning annotations

kind: Namespace
apiVersion: v1
# ...
metadata:
  annotations:
    operator.tekton.dev/prune.resources: "taskrun, pipelinerun"
    operator.tekton.dev/prune.keep-since: 7200
# ...
Copy to Clipboard Toggle word wrap

3.14. Setting additional options for webhooks
Copiar o link

Optionally, you can set the failurePolicy, timeoutSeconds, or sideEffects options for the webhooks created by several controllers in OpenShift Pipelines. For more information about these options, see the Kubernetes documentation.

Prerequisites

  • You installed the oc command-line utility.
  • You are logged into your OpenShift Container Platform cluster with administrator rights for the namespace in which OpenShift Pipelines is installed, typically the openshift-pipelines namespace.

Procedure

  1. View the list of webhooks that the OpenShift Pipelines controllers created. There are two types of webhooks: mutating webhooks and validating webhooks.

    1. To view the list of mutating webhooks, enter the following command: 

      $ oc get MutatingWebhookConfiguration
      Copy to Clipboard Toggle word wrap

      Example output

      NAME                             WEBHOOKS   AGE
annotation.operator.tekton.dev   1          4m20s
proxy.operator.tekton.dev        1          4m20s
webhook.operator.tekton.dev      1          4m22s
webhook.pipeline.tekton.dev      1          4m20s
webhook.triggers.tekton.dev      1          3m50s
      Copy to Clipboard Toggle word wrap

    2. To view the list of validating webhooks, enter the following command: 

      $ oc get ValidatingWebhookConfiguration
      Copy to Clipboard Toggle word wrap

      Example output

      NAME                                                 WEBHOOKS   AGE
config.webhook.operator.tekton.dev                   1          4m24s
config.webhook.pipeline.tekton.dev                   1          4m22s
config.webhook.triggers.tekton.dev                   1          3m52s
namespace.operator.tekton.dev                        1          4m22s
validation.pipelinesascode.tekton.dev                1          2m49s
validation.webhook.operator.tekton.dev               1          4m24s
validation.webhook.pipeline.tekton.dev               1          4m22s
validation.webhook.triggers.tekton.dev               1          3m52s
      Copy to Clipboard Toggle word wrap

  2. In the TektonConfig custom resource (CR), add configuration for mutating and validating webhooks under the section for each of the controllers as necessary, as shown in the following examples. Use the validation.webhook.pipeline.tekton.dev spec for the validating webhooks and the webhook.pipeline.tekton.dev spec for the mutating webhooks.

    Important
    • You cannot set configuration for operator webhooks.
    • All settings are optional. For example, you can set the timeoutSeconds parameter and omit the failurePolicy and sideEffects parameters.

    Example settings for the Pipelines controller

    apiVersion: operator.tekton.dev/v1
kind: TektonConfig
metadata:
  name: config
spec:
  pipeline:
    options:
      webhookConfigurationOptions:
        validation.webhook.pipeline.tekton.dev:
          failurePolicy: Fail
          timeoutSeconds: 20
          sideEffects: None
        webhook.pipeline.tekton.dev:
          failurePolicy: Fail
          timeoutSeconds: 20
          sideEffects: None
    Copy to Clipboard Toggle word wrap

    Example settings for the Triggers controller

    apiVersion: operator.tekton.dev/v1
kind: TektonConfig
metadata:
  name: config
spec:
  triggers:
    options:
      webhookConfigurationOptions:
        validation.webhook.triggers.tekton.dev:
          failurePolicy: Fail
          timeoutSeconds: 20
          sideEffects: None
        webhook.triggers.tekton.dev:
          failurePolicy: Fail
          timeoutSeconds: 20
          sideEffects: None
    Copy to Clipboard Toggle word wrap

    Example settings for the Pipelines as Code controller

    apiVersion: operator.tekton.dev/v1
kind: TektonConfig
metadata:
  name: config
spec:
  pipelinesAsCode:
    options:
      webhookConfigurationOptions:
        validation.pipelinesascode.tekton.dev:
          failurePolicy: Fail
          timeoutSeconds: 20
          sideEffects: None
        pipelines.triggers.tekton.dev:
          failurePolicy: Fail
          timeoutSeconds: 20
          sideEffects: None
    Copy to Clipboard Toggle word wrap

    Example settings for the Tekton Hub controller

    apiVersion: operator.tekton.dev/v1
kind: TektonConfig
metadata:
  name: config
spec:
  hub:
    options:
      webhookConfigurationOptions:
        validation.webhook.hub.tekton.dev:
          failurePolicy: Fail
          timeoutSeconds: 20
          sideEffects: None
        webhook.hub.tekton.dev:
          failurePolicy: Fail
          timeoutSeconds: 20
          sideEffects: None
    Copy to Clipboard Toggle word wrap

Voltar ao topo
Red Hat logoGithubredditYoutubeTwitter

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Ajudamos os usuários da Red Hat a inovar e atingir seus objetivos com nossos produtos e serviços com conteúdo em que podem confiar. Explore nossas atualizações recentes.

Tornando o open source mais inclusivo

A Red Hat está comprometida em substituir a linguagem problemática em nosso código, documentação e propriedades da web. Para mais detalhes veja o Blog da Red Hat.

Sobre a Red Hat

Fornecemos soluções robustas que facilitam o trabalho das empresas em plataformas e ambientes, desde o data center principal até a borda da rede.

Theme

© 2025 Red Hat