Chapter 33. firewall

-h, --help

Show this help message and exit

--name NAME

Name for the firewall group

--description <description>

Description of the firewall group

--ingress-firewall-policy <ingress-firewall-policy>

Ingress firewall policy (name or ID)

--no-ingress-firewall-policy

Detach ingress firewall policy from the firewall group

--egress-firewall-policy <egress-firewall-policy>

Egress firewall policy (name or ID)

--no-egress-firewall-policy

Detach egress firewall policy from the firewall group

--public

Make the firewall group public, which allows it to be used in all projects (as opposed to the default, which is to restrict its use to the current project). This option is deprecated and would be removed in R release.

--private

Restrict use of the firewall group to the current project. This option is deprecated and would be removed in R release.

--share

Share the firewall group to be used in all projects (by default, it is restricted to be used by the current project).

--no-share

Restrict use of the firewall group to the current project

--enable

Enable firewall group

--disable

Disable firewall group

--project <project>

Owner’s project (name or id)

--project-domain <project-domain>

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--port <port>

Port(s) (name or id) to apply firewall group. this option can be repeated

--no-port

Detach all port from the firewall group

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

<firewall-group>

Firewall group(s) to delete (name or id)

-h, --help

Show this help message and exit

-h, --help

Show this help message and exit

--long

List additional fields in output

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--noindent

Whether to disable indenting the json

--quote {all,minimal,none,nonnumeric}

when to include quotes, defaults to nonnumeric

<firewall-policy>

Firewall policy to insert rule (name or id)

<firewall-rule>

Firewall rule to be inserted (name or id)

-h, --help

Show this help message and exit

--insert-before <firewall-rule>

Insert the new rule before this existing rule (name or ID)

--insert-after <firewall-rule>

Insert the new rule after this existing rule (name or ID)

<name>

Name for the firewall policy

-h, --help

Show this help message and exit

--description DESCRIPTION

Description of the firewall policy

--audited

Enable auditing for the policy

--no-audited

Disable auditing for the policy

--share

Share the firewall policy to be used in all projects (by default, it is restricted to be used by the current project).

--public

Make the firewall policy public, which allows it to be used in all projects (as opposed to the default, which is to restrict its use to the current project.) This option is deprecated and would be removed in R release.

--private

Restrict use of the firewall policy to the current project.This option is deprecated and would be removed in R release.

--no-share

Restrict use of the firewall policy to the current project

--project <project>

Owner’s project (name or id)

--project-domain <project-domain>

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--firewall-rule <firewall-rule>

Firewall rule(s) to apply (name or ID)

--no-firewall-rule

Unset all firewall rules from firewall policy

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

<firewall-policy>

Firewall policy(s) to delete (name or id)

-h, --help

Show this help message and exit

-h, --help

Show this help message and exit

--long

List additional fields in output

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--noindent

Whether to disable indenting the json

--quote {all,minimal,none,nonnumeric}

when to include quotes, defaults to nonnumeric

<firewall-policy>

Firewall policy to remove rule (name or id)

<firewall-rule>

Firewall rule to remove from policy (name or id)

-h, --help

Show this help message and exit

<firewall-policy>

Firewall policy to update (name or id)

-h, --help

Show this help message and exit

--description DESCRIPTION

Description of the firewall policy

--audited

Enable auditing for the policy

--no-audited

Disable auditing for the policy

--share

Share the firewall policy to be used in all projects (by default, it is restricted to be used by the current project).

--public

Make the firewall policy public, which allows it to be used in all projects (as opposed to the default, which is to restrict its use to the current project.) This option is deprecated and would be removed in R release.

--private

Restrict use of the firewall policy to the current project.This option is deprecated and would be removed in R release.

--no-share

Restrict use of the firewall policy to the current project

--name <name>

Name for the firewall policy

--firewall-rule <firewall-rule>

Firewall rule(s) to apply (name or ID)

--no-firewall-rule

Remove all firewall rules from firewall policy

<firewall-policy>

Firewall policy to show (name or id)

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

<firewall-policy>

Firewall policy to unset (name or id)

-h, --help

Show this help message and exit

--firewall-rule <firewall-rule>

Remove firewall rule(s) from the firewall policy (name or ID)

--all-firewall-rule

Remove all firewall rules from the firewall policy

--audited

Disable auditing for the policy

--share

Restrict use of the firewall policy to the current project

--public

Restrict use of the firewall policy to the current project. This option is deprecated and would be removed in R release.

-h, --help

Show this help message and exit

--name <name>

Name of the firewall rule

--description <description>

Description of the firewall rule

--protocol {tcp,udp,icmp,any}

Protocol for the firewall rule

--action {allow,deny,reject}

Action for the firewall rule

--ip-version <ip-version>

Set IP version 4 or 6 (default is 4)

--source-ip-address <source-ip-address>

Source IP address or subnet

--no-source-ip-address

Detach source IP address

--destination-ip-address <destination-ip-address>

Destination IP address or subnet

--no-destination-ip-address

Detach destination IP address

--source-port <source-port>

Source port number or range(integer in [1, 65535] or range like 123:456)

--no-source-port

Detach source port number or range

--destination-port <destination-port>

Destination port number or range(integer in [1, 65535] or range like 123:456)

--no-destination-port

Detach destination port number or range

--public

Make the firewall policy public, which allows it to be used in all projects (as opposed to the default, which is to restrict its use to the current project). This option is deprecated and would be removed in R Release

--private

Restrict use of the firewall rule to the current project.This option is deprecated and would be removed in R release.

--share

Share the firewall rule to be used in all projects (by default, it is restricted to be used by the current project).

--no-share

Restrict use of the firewall rule to the current project

--enable-rule

Enable this rule (default is enabled)

--disable-rule

Disable this rule

--project <project>

Owner’s project (name or id)

--project-domain <project-domain>

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

<firewall-rule>

Firewall rule(s) to delete (name or id)

-h, --help

Show this help message and exit

-h, --help

Show this help message and exit

--long

List additional fields in output

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--noindent

Whether to disable indenting the json

--quote {all,minimal,none,nonnumeric}

when to include quotes, defaults to nonnumeric

<firewall-rule>

Firewall rule to set (name or id)

-h, --help

Show this help message and exit

--name <name>

Name of the firewall rule

--description <description>

Description of the firewall rule

--protocol {tcp,udp,icmp,any}

Protocol for the firewall rule

--action {allow,deny,reject}

Action for the firewall rule

--ip-version <ip-version>

Set IP version 4 or 6 (default is 4)

--source-ip-address <source-ip-address>

Source IP address or subnet

--no-source-ip-address

Detach source IP address

--destination-ip-address <destination-ip-address>

Destination IP address or subnet

--no-destination-ip-address

Detach destination IP address

--source-port <source-port>

Source port number or range(integer in [1, 65535] or range like 123:456)

--no-source-port

Detach source port number or range

--destination-port <destination-port>

Destination port number or range(integer in [1, 65535] or range like 123:456)

--no-destination-port

Detach destination port number or range

--public

Make the firewall policy public, which allows it to be used in all projects (as opposed to the default, which is to restrict its use to the current project). This option is deprecated and would be removed in R Release

--private

Restrict use of the firewall rule to the current project.This option is deprecated and would be removed in R release.

--share

Share the firewall rule to be used in all projects (by default, it is restricted to be used by the current project).

--no-share

Restrict use of the firewall rule to the current project

--enable-rule

Enable this rule (default is enabled)

--disable-rule

Disable this rule

<firewall-rule>

Firewall rule to display (name or id)

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

<firewall-rule>

Firewall rule to unset (name or id)

-h, --help

Show this help message and exit

--source-ip-address

Source ip address or subnet

--destination-ip-address

Destination IP address or subnet

--source-port

Source port number or range(integer in [1, 65535] or range like 123:456)

--destination-port

Destination port number or range(integer in [1, 65535] or range like 123:456)

--share

Restrict use of the firewall rule to the current project

--public

Restrict use of the firewall rule to the current project. This option is deprecated and would be removed in R Release.

--enable-rule

Disable this rule

<firewall-group>

Firewall group to update (name or id)

-h, --help

Show this help message and exit

--name NAME

Name for the firewall group

--description <description>

Description of the firewall group

--ingress-firewall-policy <ingress-firewall-policy>

Ingress firewall policy (name or ID)

--no-ingress-firewall-policy

Detach ingress firewall policy from the firewall group

--egress-firewall-policy <egress-firewall-policy>

Egress firewall policy (name or ID)

--no-egress-firewall-policy

Detach egress firewall policy from the firewall group

--public

Make the firewall group public, which allows it to be used in all projects (as opposed to the default, which is to restrict its use to the current project). This option is deprecated and would be removed in R release.

--private

Restrict use of the firewall group to the current project. This option is deprecated and would be removed in R release.

--share

Share the firewall group to be used in all projects (by default, it is restricted to be used by the current project).

--no-share

Restrict use of the firewall group to the current project

--enable

Enable firewall group

--disable

Disable firewall group

--port <port>

Port(s) (name or id) to apply firewall group. this option can be repeated

--no-port

Detach all port from the firewall group

<firewall-group>

Firewall group to show (name or id)

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

<firewall-group>

Firewall group to unset (name or id)

-h, --help

Show this help message and exit

--port <port>

Port(s) (name or id) to apply firewall group. this option can be repeated

--all-port

Remove all ports for this firewall group

--ingress-firewall-policy

Ingress firewall policy (name or ID) to delete

--egress-firewall-policy

Egress firewall policy (name or ID) to delete

--public

Make the firewall group public, which allows it to be used in all projects (as opposed to the default, which is to restrict its use to the current project). This option is deprecated and would be removed in R release.

--share

Restrict use of the firewall group to the current project

--enable

Disable firewall group