Red Hat Summit Red Hat SummitSuporteConsoleDesenvolvedoresComeçar um testeContato

Este conteúdo não está disponível no idioma selecionado.

Appendix A. Sample environment file: creating a Ceph Storage cluster

The following custom environment file uses many of the options described throughout Chapter 2, Preparing overcloud nodes. This sample does not include any commented-out options. For an overview on environment files, see Environment Files (from the Advanced Overcloud Customization guide).

/home/stack/templates/storage-config.yaml

parameter_defaults:
1 

  CinderBackupBackend: ceph
2 

  CephAnsibleDisksConfig:
3 

    osd_scenario: lvm
    osd_objectstore: bluestore
    dmcrypt: true
    devices:
      - /dev/disk/by-path/pci-0000:03:00.0-scsi-0:0:10:0
      - /dev/disk/by-path/pci-0000:03:00.0-scsi-0:0:11:0
      - /dev/nvme0n1
  ControllerCount: 3
4 

  OvercloudControlFlavor: control
  ComputeCount: 3
  OvercloudComputeFlavor: compute
  CephStorageCount: 3
  OvercloudCephStorageFlavor: ceph-storage
  CephMonCount: 3
  OvercloudCephMonFlavor: ceph-mon
  CephMdsCount: 3
  OvercloudCephMdsFlavor: ceph-mds
  NeutronNetworkType: vxlan
5
Copy to Clipboard Toggle word wrap

1
The parameter_defaults section modifies the default values for parameters in all templates. Most of the entries listed here are described in Chapter 4, Customizing the Storage service.
2
If you are deploying the Ceph Object Gateway, you can use Ceph Object Storage (ceph-rgw) as a backup target. To configure this, set CinderBackupBackend to swift. See Section 4.2, “Enabling the Ceph Object Gateway” for details.
3
The CephAnsibleDisksConfig section defines a custom disk layout for deployments using BlueStore and Ceph 3.2 or later. For deployments using FileStore and Ceph 3.1 or earlier, modify CephAnsibleDisksConfig using the examples in described in Section 5.2, “Mapping the Ceph Storage node disk layout”.
Warning

osd_scenario: lvm is used in the example to default new deployments to bluestore as configured by ceph-volume; this is only available with ceph-ansible 3.2 or later and Ceph Luminous or later. The parameters to support filestore with ceph-ansible 3.2 are backwards compatible. Therefore, in existing FileStore deployments, do not simply change the osd_objectstore or osd_scenario parameters without first taking steps to maintain both back ends.

4
For each role, the *Count parameters assign a number of nodes while the Overcloud*Flavor parameters assign a flavor. For example, ControllerCount: 3 assigns 3 nodes to the Controller role, and OvercloudControlFlavor: control sets each of those roles to use the control flavor. See Section 7.1, “Assigning nodes and flavors to roles” for details.
Note

The CephMonCount, CephMdsCount, OvercloudCephMonFlavor, and OvercloudCephMdsFlavor parameters (along with the ceph-mon and ceph-mds flavors) will only be valid if you created a custom CephMON and CephMds role, as described in Chapter 3, Deploying Ceph services on dedicated nodes.

5
NeutronNetworkType: sets the network type that the neutron service should use (in this case, vxlan).
Voltar ao topo
Red Hat logoGithubredditYoutubeTwitter

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Ajudamos os usuários da Red Hat a inovar e atingir seus objetivos com nossos produtos e serviços com conteúdo em que podem confiar. Explore nossas atualizações recentes.

Tornando o open source mais inclusivo

A Red Hat está comprometida em substituir a linguagem problemática em nosso código, documentação e propriedades da web. Para mais detalhes veja o Blog da Red Hat.

Sobre a Red Hat

Fornecemos soluções robustas que facilitam o trabalho das empresas em plataformas e ambientes, desde o data center principal até a borda da rede.

Theme

© 2025 Red Hat