Appendix A. Using an NFS Share for Content Storage

Your environment requires adequate hard disk space to fulfill content storage. In some situations, it is useful to use an NFS share to store this content. This appendix shows how to mount the NFS share on your Satellite Server’s content management component.

Important

Do not mount the full /var/lib/pulp on an NFS share. Use high-bandwidth, low-latency storage for the /var/lib/pulp file system. Red Hat Satellite has many I/O-intensive operations; therefore, high-latency, low-bandwidth storage might have issues with performance degradation. Only use the NFS share for the /var/lib/pulp/content directory.

Create the NFS share. This example uses a share at nfs.example.com:/satellite/content. Ensure this share provides the appropriate permissions to Satellite Server and its apache user.
Shutdown the Satellite services on the Satellite host:
```
foreman-maintain service stop
```
```
# foreman-maintain service stop
```
Copy to Clipboard Toggle word wrap
Ensure Satellite Server has the nfs-utils package installed:
```
yum install nfs-utils
```
```
# yum install nfs-utils
```
Copy to Clipboard Toggle word wrap
You need to copy the existing contents of /var/lib/pulp/content to the NFS share. First, mount the NFS share to a temporary location:
```
mkdir /mnt/temp
mount -o rw nfs.example.com:/satellite/content /mnt/temp
```
```
# mkdir /mnt/temp
# mount -o rw nfs.example.com:/satellite/content /mnt/temp
```
Copy to Clipboard Toggle word wrap
Copy the existing contents of /var/lib/pulp/content to the temporary location:
```
cp -r /var/lib/pulp/content/* /mnt/temp/.
```
```
# cp -r /var/lib/pulp/content/* /mnt/temp/.
```
Copy to Clipboard Toggle word wrap
Set the permissions for all files on the share to use the apache user. This ID of this user is usually 48.
Unmount the temporary storage location:
```
umount /mnt/temp
```
```
# umount /mnt/temp
```
Copy to Clipboard Toggle word wrap
Remove the existing contents of /var/lib/pulp/content:
```
rm -rf /var/lib/pulp/content/*
```
```
# rm -rf /var/lib/pulp/content/*
```
Copy to Clipboard Toggle word wrap

Edit the /etc/fstab file and add the following line:

nfs.example.com:/satellite/content    /var/lib/pulp/content   nfs    rw,hard,intr,context="system_u:object_r:httpd_sys_rw_content_t:s0"

nfs.example.com:/satellite/content    /var/lib/pulp/content   nfs    rw,hard,intr,context="system_u:object_r:httpd_sys_rw_content_t:s0"

Copy to Clipboard

Toggle word wrap

This makes the mount persistent across system reboots. Ensure to include the SELinux context.

Enable the mount:
```
mount -a
```
```
# mount -a
```
Copy to Clipboard Toggle word wrap
Confirm the NFS share mounts to var/lib/pulp/content:
```
df
```
```
# df
Filesystem                         1K-blocks     Used Available Use% Mounted on
...
nfs.example.com:/satellite/content 309506048 58632800 235128224  20% /var/lib/pulp/content
...
```
Copy to Clipboard Toggle word wrap
Also confirm that the existing content exists at the mount on var/lib/pulp/content:
```
ls /var/lib/pulp/content
```
```
# ls /var/lib/pulp/content
```
Copy to Clipboard Toggle word wrap
Start the Satellite services on the Satellite host:
```
foreman-maintain service start
```
```
# foreman-maintain service start
```
Copy to Clipboard Toggle word wrap

Satellite Server now uses the NFS share to store content. Run a content synchronization (see Section 5.3, “Synchronizing Content”) to ensure the NFS share works as expected.

Voltar ao topo

Este conteúdo não está disponível no idioma selecionado.

Appendix A. Using an NFS Share for Content Storage

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Tornando o open source mais inclusivo

Sobre a Red Hat

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links