5.3. Configuring the resources and resource group for an NFS server in a cluster

Procedure

1. Create the LVM-activate resource named my_lvm. Because the resource group nfsgroup does not yet exist, this command creates the resource group.

   警告

   Do not configure more than one LVM-activate resource that uses the same LVM volume group in an active/passive HA configuration, as this risks data corruption. Additionally, do not configure an LVM-activate resource as a clone resource in an active/passive HA configuration.

   [root@z1 ~]# pcs resource create my_lvm ocf:heartbeat:LVM-activate vgname=my_vg vg_access_mode=system_id --group nfsgroup

2. Check the status of the cluster to verify that the resource is running.

   root@z1 ~]#  pcs status
   Cluster name: my_cluster
   Last updated: Thu Jan  8 11:13:17 2015
   Last change: Thu Jan  8 11:13:08 2015
   Stack: corosync
   Current DC: z2.example.com (2) - partition with quorum
   Version: 1.1.12-a14efad
   2 Nodes configured
   3 Resources configured
   
   Online: [ z1.example.com z2.example.com ]
   
   Full list of resources:
    myapc  (stonith:fence_apc_snmp):       Started z1.example.com
    Resource Group: nfsgroup
        my_lvm     (ocf::heartbeat:LVM-activate):   Started z1.example.com
   
   PCSD Status:
     z1.example.com: Online
     z2.example.com: Online
   
   Daemon Status:
     corosync: active/enabled
     pacemaker: active/enabled
     pcsd: active/enabled

3. Configure a Filesystem resource for the cluster.

   The following command configures an XFS Filesystem resource named nfsshare as part of the nfsgroup resource group. This file system uses the LVM volume group and XFS file system you created in Configuring an LVM volume with an XFS file system in a cluster and will be mounted on the /nfsshare directory you created in Configuring an NFS share.

   [root@z1 ~]# pcs resource create nfsshare Filesystem device=/dev/my_vg/my_lv directory=/nfsshare fstype=xfs --group nfsgroup

   You can specify mount options as part of the resource configuration for a Filesystem resource with the options=options parameter. Run the pcs resource describe Filesystem command for full configuration options.

4. Verify that the my_lvm and nfsshare resources are running.

   [root@z1 ~]# pcs status
   ...
   Full list of resources:
    myapc  (stonith:fence_apc_snmp):       Started z1.example.com
    Resource Group: nfsgroup
        my_lvm     (ocf::heartbeat:LVM-activate):   Started z1.example.com
        nfsshare   (ocf::heartbeat:Filesystem):    Started z1.example.com
   ...

5. Create the nfsserver resource named nfs-daemon as part of the resource group nfsgroup.

   注意

   The nfsserver resource allows you to specify an nfs_shared_infodir parameter, which is a directory that NFS servers use to store NFS-related stateful information.

   It is recommended that this attribute be set to a subdirectory of one of the Filesystem resources you created in this collection of exports. This ensures that the NFS servers are storing their stateful information on a device that will become available to another node if this resource group needs to relocate. In this example;

   • /nfsshare is the shared-storage directory managed by the Filesystem resource
   • /nfsshare/exports/export1 and /nfsshare/exports/export2 are the export directories
   • /nfsshare/nfsinfo is the shared-information directory for the nfsserver resource

   [root@z1 ~]# pcs resource create nfs-daemon nfsserver nfs_shared_infodir=/nfsshare/nfsinfo nfs_no_notify=true --group nfsgroup
   
   [root@z1 ~]# pcs status
   ...

6. Add the exportfs resources to export the /nfsshare/exports directory. These resources are part of the resource group nfsgroup. This builds a virtual directory for NFSv4 clients. NFSv3 clients can access these exports as well.

   注意

   The fsid=0 option is required only if you want to create a virtual directory for NFSv4 clients. For more information, see the Red Hat Knowledgebase solution How do I configure the fsid option in an NFS server’s /etc/exports file?.

   [root@z1 ~]# pcs resource create nfs-root exportfs clientspec=192.168.122.0/255.255.255.0 options=rw,sync,no_root_squash directory=/nfsshare/exports fsid=0 --group nfsgroup
   
   [root@z1 ~]# pcs resource create nfs-export1 exportfs clientspec=192.168.122.0/255.255.255.0 options=rw,sync,no_root_squash directory=/nfsshare/exports/export1 fsid=1 --group nfsgroup
   
   [root@z1 ~]# pcs resource create nfs-export2 exportfs clientspec=192.168.122.0/255.255.255.0 options=rw,sync,no_root_squash directory=/nfsshare/exports/export2 fsid=2 --group nfsgroup

7. Add the floating IP address resource that NFS clients will use to access the NFS share. This resource is part of the resource group nfsgroup. For this example deployment, we are using 192.168.122.200 as the floating IP address.

   [root@z1 ~]# pcs resource create nfs_ip IPaddr2 ip=192.168.122.200 cidr_netmask=24 --group nfsgroup

8. Add an nfsnotify resource for sending NFSv3 reboot notifications once the entire NFS deployment has initialized. This resource is part of the resource group nfsgroup.

   注意

   For the NFS notification to be processed correctly, the floating IP address must have a host name associated with it that is consistent on both the NFS servers and the NFS client.

   [root@z1 ~]# pcs resource create nfs-notify nfsnotify source_host=192.168.122.200 --group nfsgroup

9. After creating the resources and the resource constraints, you can check the status of the cluster. Note that all resources are running on the same node.

   [root@z1 ~]# pcs status
   ...
   Full list of resources:
    myapc  (stonith:fence_apc_snmp):       Started z1.example.com
    Resource Group: nfsgroup
        my_lvm     (ocf::heartbeat:LVM-activate):   Started z1.example.com
        nfsshare   (ocf::heartbeat:Filesystem):    Started z1.example.com
        nfs-daemon (ocf::heartbeat:nfsserver):     Started z1.example.com
        nfs-root   (ocf::heartbeat:exportfs):      Started z1.example.com
        nfs-export1        (ocf::heartbeat:exportfs):      Started z1.example.com
        nfs-export2        (ocf::heartbeat:exportfs):      Started z1.example.com
        nfs_ip     (ocf::heartbeat:IPaddr2):       Started  z1.example.com
        nfs-notify (ocf::heartbeat:nfsnotify):     Started z1.example.com
   ...