Red Hat Summit 红帽全球峰会支持控制台（Console）开发人员开始试用联系人

此内容没有您所选择的语言版本。

Chapter 4. Setting up the Environment

This chapter outlines the details for setting up the environment for Red Hat Gluster Storage Container Converged in OpenShift.
Execute the following steps to prepare the Red Hat OpenShift Container Platform cluster:
  1. On the master or client, execute the following command to login as the cluster admin user: 
    # oc login
    For example: 
     oc login
Authentication required for https://dhcp46-24.lab.eng.blr.redhat.com:8443 (openshift)
Username: test
Password:
Login successful.

You have access to the following projects and can switch between them with 'oc project <project_name>':

    default
    kube-system
    logging
    management-infra
    openshift
    openshift-infra
  * storage-project

Using project "storage-project".
  2. On the master or client, execute the following command to create a project, which will contain all the containerized Red Hat Gluster Storage services: 
    # oc new-project <project_name>
    For example: 
    # oc new-project storage-project

Now using project "storage-project" on server "https://master.example.com:8443"
  3. After the project is created, execute the following command on the master node to enable the deployment of the privileged containers as Red Hat Gluster Storage container can only run in the privileged mode. 
    # oadm policy add-scc-to-user privileged -z storage-project
  4. Execute the following steps on the master to set up the router:

    Note

    If a router already exists, proceed to Step 5.
    1. Execute the following command to enable the deployment of the router: 
      # oadm policy add-scc-to-user privileged -z router
# oadm policy add-scc-to-user privileged -z default
    2. Execute the following command to deploy the router: 
      # oadm router storage-project-router --replicas=1
    3. Edit the subdomain name in the config.yaml file located at /etc/origin/master/master-config.yaml.
      For example: 
      subdomain: "cloudapps.mystorage.com"
    4. Restart the master OpenShift services by executing the following command: 
      # systemctl restart atomic-openshift-master

      Note

      If the router setup fails, use the port forward method as described in Appendix C, Client Configuration using Port Forwarding .
    For more information regarding router setup, see https://access.redhat.com/documentation/en/openshift-container-platform/3.5/paged/installation-and-configuration/chapter-4-setting-up-a-router
  5. Execute the following command to verify if the router is running: 
    # oc get dc <router_name>
    For example: 
    # oc get dc storage-project-router
NAME                   REVISION   DESIRED   CURRENT   TRIGGERED BY
storage-project-router   1          1         1         config

    Note

    Ensure you do not edit the /etc/dnsmasq.conf file until the router has started.
  6. After the router is running, the client has to be setup to access the services in the OpenShift cluster. Execute the following steps on the client to set up the DNS.
    1. Edit the /etc/dnsmasq.conf file and add the following line to the file: 
      address=/.cloudapps.mystorage.com/<Router_IP_Address>
      where, Router_IP_Address is the IP address of the node where the router is running.
    2. Restart the dnsmasq service by executing the following command: 
      # systemctl restart dnsmasq
    3. Edit /etc/resolv.conf and add the following line: 
      nameserver 127.0.0.1
    For more information regarding setting up the DNS, see https://access.redhat.com/documentation/en/openshift-container-platform/3.5/single/installation-and-configuration/#envirornment-requirements.
Red Hat logoGithubredditYoutubeTwitter

学习

尝试、购买和销售

社区

关于红帽文档

通过我们的产品和服务，以及可以信赖的内容，帮助红帽用户创新并实现他们的目标。 了解我们当前的更新.

让开源更具包容性

红帽致力于替换我们的代码、文档和 Web 属性中存在问题的语言。欲了解更多详情，请参阅红帽博客.

關於紅帽

我们提供强化的解决方案，使企业能够更轻松地跨平台和环境（从核心数据中心到网络边缘）工作。

Theme

© 2026 Red Hat返回顶部