Chapter 5. Working with containers

You can use an Init Container resource to perform tasks before the rest of a pod is deployed.

A pod can have Init Containers in addition to application containers. Init containers allow you to reorganize setup scripts and binding code.

An Init Container can:

Each Init Container must complete successfully before the next one is started. So, Init Containers provide an easy way to block or delay the startup of app containers until some set of preconditions are met.

For example, the following are some ways you can use Init Containers:

See the Kubernetes documentation for more information.

The following example outlines a simple Pod which has two Init Containers. The first waits for myservice and the second waits for mydb. Once both containers complete, the Pod begins.

Volumes are mounted file systems available to pods and their containers which may be backed by a number of host-local or network attached storage endpoints. Containers are not persistent by default; on restart, their contents are cleared.

To ensure that the file system on the volume contains no errors and, if errors are present, to repair them when possible, OpenShift Container Platform invokes the fsck utility prior to the mount utility. This occurs when either adding a volume or updating an existing volume.

The simplest volume type is emptyDir, which is a temporary directory on a single machine. Administrators may also allow you to request a persistent volume that is automatically attached to your pods.

You can use the CLI command oc set volume to add and remove volumes and volume mounts for any object that has a pod template like replication controllers or DeploymentConfigs. You can also list volumes in pods or any object that has a pod template.

The oc set volume command uses the following general syntax:

$ oc set volume <object_selection> <operation> <mandatory_parameters> <options>

You can list volumes and volume mounts in pods or pod templates:

$ oc set volume <object_type>/<name> --list [options]

List volume supported options:

For example:

You can add volumes and volume mounts to a pod.

$ oc set volume <object_type>/<name> --add [options]

For example:

You can modify the volumes and volume mounts in a pod.

$ oc set volume <object_type>/<name> --add --overwrite [options]

For example:

You can remove a volume or volume mount from a pod.

$ oc set volume <object_type>/<name> --remove [options]

For example:

You can configure a volume to allows you to share one volume for multiple uses in a single pod using the volumeMounts.subPath property to specify a subPath inside a volume instead of the volume’s root. `` .Procedure

Projected volumes can map any combination of these volume sources into a single directory, allowing the user to:

The following general scenarios show how you can use projected volumes.

apiVersion: v1
kind: Pod
metadata:
  name: volume-test
spec:
  containers:
  - name: container-test
    image: busybox
    volumeMounts: 1
    - name: all-in-one
      mountPath: "/projected-volume"2
      readOnly: true 3
  volumes: 4
  - name: all-in-one 5
    projected:
      defaultMode: 0400 6
      sources:
      - secret:
          name: mysecret 7
          items:
            - key: username
              path: my-group/my-username 8
      - downwardAPI: 9
          items:
            - path: "labels"
              fieldRef:
                fieldPath: metadata.labels
            - path: "cpu_limit"
              resourceFieldRef:
                containerName: container-test
                resource: limits.cpu
      - configMap: 10
          name: myconfigmap
          items:
            - key: config
              path: my-group/my-config
              mode: 0777 11

apiVersion: v1
kind: Pod
metadata:
  name: volume-test
spec:
  containers:
  - name: container-test
    image: busybox
    volumeMounts:
    - name: all-in-one
      mountPath: "/projected-volume"
      readOnly: true
  volumes:
  - name: all-in-one
    projected:
      defaultMode: 0755
      sources:
      - secret:
          name: mysecret
          items:
            - key: username
              path: my-group/my-username
      - secret:
          name: mysecret2
          items:
            - key: password
              path: my-group/my-password
              mode: 511

When creating projected volumes, consider the volume file path situations described in Understanding projected vol`umes.

The following example shows how to use a projected volume to mount an existing Secret volume source. The steps can be used to create a user name and password Secrets from local files. You then create a pod that runs one container, using a projected volume to mount the Secrets into the same shared directory.

The Downward API contains such information as the pod’s name, project, and resource values. Containers can consume information from the downward API using environment variables or a volume plug-in.

Fields within the pod are selected using the FieldRef API type. FieldRef has two fields:

Currently, the valid selectors in the v1 API include:

The apiVersion field, if not specified, defaults to the API version of the enclosing pod template.

You containers can consume API values using environment variables or a volume plug-in. Depending on the method you choose, containers can consume:

Annotations and labels are available using only a volume plug-in.

When creating pods, you can use the downward API to inject information about computing resource requests and limits so that image and application authors can correctly create an image for specific environments.

You can do this using environment variable or a volume plug-in.

When creating pods, you can use the downward API to inject Secrets so image and application authors can create an image for specific environments.

When creating pods, you can use the downward API to inject configuration map values so image and application authors can create an image for specific environments.

When creating pods, you can reference the value of a previously defined environment variable by using the $() syntax. If the environment variable reference can not be resolved, the value will be left as the provided string.

When creating a pod, you can escape an environment variable reference by using a double dollar sign. The value will then be set to a single dollar sign version of the provided value.

The oc rsync command, or remote sync, is a useful tool for copying database archives to and from your pods for backup and restore purposes. You can also use oc rsync to copy source code changes into a running pod for development debugging, when the running pod supports hot reload of source files.

$ oc rsync <source> <destination> [-c <container>]

<pod name>:<dir>

Support for copying local files to or from a container is built into the CLI.

If rsync is not found locally or in the remote container, a tar archive is created locally and sent to the container where the tar utility is used to extract the files. If tar is not available in the remote container, the copy will fail.

The tar copy method does not provide the same functionality as oc rsync. For example, oc rsync creates the destination directory if it does not exist and only sends files that are different between the source and the destination.

$ oc rsync devpod1234:/src /home/user/source

oc rsync devpod1234:/src/status.txt /home/user/
WARNING: cannot use rsync: rsync not available in container
status.txt

The oc rsync command exposes fewer command line options than standard rsync. In the case that you wish to use a standard rsync command line option which is not available in oc rsync (for example the --exclude-from=FILE option), it may be possible to use standard rsync 's --rsh (-e) option or RSYNC_RSH environment variable as a workaround, as follows:

$ rsync --rsh='oc rsh' --exclude-from=FILE SRC POD:DEST

or:

$ export RSYNC_RSH='oc rsh'
$ rsync --exclude-from=FILE SRC POD:DEST

Both of the above examples configure standard rsync to use oc rsh as its remote shell program to enable it to connect to the remote pod, and are an alternative to running oc rsync.

Support for remote container command execution is built into the CLI.

$ oc exec <pod> [-c <container>] <command> [<arg_1> ... <arg_n>]

For example:

$ oc exec mypod date
Thu Apr  9 02:21:53 UTC 2015

Clients initiate the execution of a remote command in a container by issuing a request to the Kubernetes API server:

/proxy/nodes/<node_name>/exec/<namespace>/<pod>/<container>?command=<command>

In the above URL:

For example:

/proxy/nodes/node123.openshift.com/exec/myns/mypod/mycontainer?command=date

Additionally, the client can add parameters to the request to indicate if:

After sending an exec request to the API server, the client upgrades the connection to one that supports multiplexed streams; the current implementation uses SPDY.

The client creates one stream each for stdin, stdout, and stderr. To distinguish among the streams, the client sets the streamType header on the stream to one of stdin, stdout, or stderr.

The client closes all streams, the upgraded connection, and the underlying connection when it is finished with the remote command execution request.

You can use the CLI to forward one or more local ports to a pod. This allows you to listen on a given or random port locally, and have data forwarded to and from given ports in the pod.

Support for port forwarding is built into the CLI:

$ oc port-forward <pod> [<local_port>:]<remote_port> [...[<local_port_n>:]<remote_port_n>]

The CLI listens on each local port specified by the user, forwarding via the protocol described below.

Ports may be specified using the following formats:

OpenShift Container Platform handles port-forward requests from clients. Upon receiving a request, OpenShift Container Platform upgrades the response and waits for the client to create port-forwarding streams. When OpenShift Container Platform receives a new stream, it copies data between the stream and the pod’s port.

Architecturally, there are options for forwarding to a pod’s port. The supported OpenShift Container Platform implementation invokes nsenter directly on the node host to enter the pod’s network namespace, then invokes socat to copy data between the stream and the pod’s port. However, a custom implementation could include running a helper pod that then runs nsenter and socat, so that those binaries are not required to be installed on the host.

You can use the CLI to port-forward one or more local ports to a pod.

$ oc port-forward <pod> [<local_port>:]<remote_port> [...[<local_port_n>:]<remote_port_n>]

For example:

Clients initiate port forwarding to a pod by issuing a request to the Kubernetes API server:

/proxy/nodes/<node_name>/portForward/<namespace>/<pod>

In the above URL:

For example:

/proxy/nodes/node123.openshift.com/portForward/myns/mypod

After sending a port forward request to the API server, the client upgrades the connection to one that supports multiplexed streams; the current implementation uses SPDY.

The client creates a stream with the port header containing the target port in the pod. All data written to the stream is delivered via the Kubelet to the target pod and port. Similarly, all data sent from the pod for that forwarded connection is delivered back to the same stream in the client.

The client closes all streams, the upgraded connection, and the underlying connection when it is finished with the port forwarding request.