8. Resolved Issues

没​​​​​​​有​​​​​​​正​​​​​​​确​​​​​​​生​​​​​​​成​​​​​​​ TTY 设​​​​​​​备​​​​​​​活​​​​​​​动​​​​​​​报​​​​​​​告​​​​​​​的​​​​​​​数​​​​​​​据​​​​​​​。​​​​​​​因​​​​​​​此​​​​​​​ sar -y 命​​​​​​​令​​​​​​​失​​​​​​​败​​​​​​​，返​​​​​​​回​​​​​​​出​​​​​​​错​​​​​​​信​​​​​​​息​​​​​​​：

Requested activities not available in file

在​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​的​​​​​​​软​​​​​​​件​​​​​​​包​​​​​​​中​​​​​​​，以​​​​​​​修​​​​​​​正​​​​​​​了​​​​​​​ sar，因​​​​​​​此​​​​​​​ -y 选​​​​​​​项​​​​​​​会​​​​​​​输​​​​​​​出​​​​​​​ TTY 设​​​​​​​备​​​​​​​活​​​​​​​动​​​​​​​。​​​​​​​

之​​​​​​​前​​​​​​​，在​​​​​​​ /etc/multipath.conf 中​​​​​​​将​​​​​​​ max_fds 设​​​​​​​为​​​​​​​ unlimited 会​​​​​​​使​​​​​​​ multipathd 守​​​​​​​护​​​​​​​进​​​​​​​程​​​​​​​无​​​​​​​法​​​​​​​启​​​​​​​动​​​​​​​。​​​​​​​如​​​​​​​果​​​​​​​需​​​​​​​要​​​​​​​将​​​​​​​打​​​​​​​开​​​​​​​文​​​​​​​件​​​​​​​描​​​​​​​述​​​​​​​符​​​​​​​数​​​​​​​目​​​​​​​设​​​​​​​为​​​​​​​系​​​​​​​统​​​​​​​最​​​​​​​大​​​​​​​值​​​​​​​，则​​​​​​​应​​​​​​​将​​​​​​​ max_fds 设​​​​​​​为​​​​​​​ max。​​​​​​​

mod_perl 现​​​​​​​在​​​​​​​已​​​​​​​复​​​​​​​位​​​​​​​至​​​​​​​版​​​​​​​本​​​​​​​ 2.0.4，即​​​​​​​最​​​​​​​新​​​​​​​的​​​​​​​上​​​​​​​游​​​​​​​发​​​​​​​行​​​​​​​本​​​​​​​。​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​采​​​​​​​用​​​​​​​了​​​​​​​一​​​​​​​些​​​​​​​更​​​​​​​新​​​​​​​，其​​​​​​​中​​​​​​​包​​​​​​​括​​​​​​​一​​​​​​​个​​​​​​​ bug 修​​​​​​​复​​​​​​​，它​​​​​​​可​​​​​​​允​​​​​​​许​​​​​​​ mod_perl 在​​​​​​​ Bugzilla 3.0 可​​​​​​​正​​​​​​​常​​​​​​​工​​​​​​​作​​​​​​​。​​​​​​​

已​​​​​​​将​​​​​​​ cups 复​​​​​​​位​​​​​​​至​​​​​​​版​​​​​​​本​​​​​​​ 1.3.7。​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​采​​​​​​​用​​​​​​​了​​​​​​​一​​​​​​​些​​​​​​​ bug 修​​​​​​​复​​​​​​​和​​​​​​​改​​​​​​​进​​​​​​​，其​​​​​​​中​​​​​​​包​​​​​​​括​​​​​​​：

已​​​​​​​将​​​​​​​ lm_sensors 复​​​​​​​位​​​​​​​至​​​​​​​版​​​​​​​本​​​​​​​ 2.10.7。​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​采​​​​​​​用​​​​​​​一​​​​​​​些​​​​​​​上​​​​​​​游​​​​​​​改​​​​​​​进​​​​​​​和​​​​​​​ bug 修​​​​​​​复​​​​​​​，其​​​​​​​中​​​​​​​包​​​​​​​括​​​​​​​当​​​​​​​也​​​​​​​加​​​​​​​载​​​​​​​了​​​​​​​ k8temp 时​​​​​​​防​​​​​​​止​​​​​​​ libsensor 崩​​​​​​​溃​​​​​​​的​​​​​​​ bug，并​​​​​​​给​​​​​​​出​​​​​​​ General parse error 信​​​​​​​息​​​​​​​。​​​​​​​

在​​​​​​​这​​​​​​​个​​​​​​​发​​​​​​​行​​​​​​​本​​​​​​​中​​​​​​​更​​​​​​​新​​​​​​​了​​​​​​​ elfutils 来​​​​​​​讨​​​​​​​论​​​​​​​以​​​​​​​下​​​​​​​ bug：

已​​​​​​​将​​​​​​​ vnc-server 复​​​​​​​位​​​​​​​至​​​​​​​版​​​​​​​本​​​​​​​ 4.1.2-14.e15。​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​采​​​​​​​用​​​​​​​了​​​​​​​以​​​​​​​下​​​​​​​修​​​​​​​复​​​​​​​：

已​​​​​​​将​​​​​​​ smartmontools 复​​​​​​​位​​​​​​​至​​​​​​​版​​​​​​​本​​​​​​​ 5.38。​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​提​​​​​​​高​​​​​​​了​​​​​​​对​​​​​​​硬​​​​​​​件​​​​​​​设​​​​​​​备​​​​​​​的​​​​​​​自​​​​​​​动​​​​​​​侦​​​​​​​测​​​​​​​、​​​​​​​提​​​​​​​高​​​​​​​了​​​​​​​对​​​​​​​ CCISS RAID 阵​​​​​​​列​​​​​​​的​​​​​​​支​​​​​​​持​​​​​​​并​​​​​​​包​​​​​​​括​​​​​​​支​​​​​​​持​​​​​​​设​​​​​​​备​​​​​​​的​​​​​​​更​​​​​​​大​​​​​​​的​​​​​​​数​​​​​​​据​​​​​​​库​​​​​​​。​​​​​​​

这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​还​​​​​​​修​​​​​​​复​​​​​​​了​​​​​​​ SELinux 禁​​​​​​​止​​​​​​​ smartmontools 监​​​​​​​控​​​​​​​ 3ware RAID 设​​​​​​​备​​​​​​​的​​​​​​​ bug。​​​​​​​smartmontools 现​​​​​​​在​​​​​​​可​​​​​​​正​​​​​​​常​​​​​​​监​​​​​​​控​​​​​​​这​​​​​​​样​​​​​​​的​​​​​​​设​​​​​​​备​​​​​​​。​​​​​​​

已​​​​​​​将​​​​​​​ python-urlgrabber 复​​​​​​​位​​​​​​​至​​​​​​​版​​​​​​​本​​​​​​​ 3.1.0-5。​​​​​​​这​​​​​​​采​​​​​​​用​​​​​​​了​​​​​​​上​​​​​​​游​​​​​​​中​​​​​​​的​​​​​​​一​​​​​​​些​​​​​​​ bug 修​​​​​​​复​​​​​​​，其​​​​​​​中​​​​​​​包​​​​​​​括​​​​​​​：

已​​​​​​​将​​​​​​​ yum-utils 复​​​​​​​位​​​​​​​至​​​​​​​上​​​​​​​游​​​​​​​版​​​​​​​本​​​​​​​ 1.1.16。​​​​​​​这​​​​​​​采​​​​​​​用​​​​​​​了​​​​​​​几​​​​​​​个​​​​​​​ bug 修​​​​​​​复​​​​​​​，其​​​​​​​中​​​​​​​包​​​​​​​括​​​​​​​：

这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​还​​​​​​​包​​​​​​​括​​​​​​​ yum-fastestmirror 插​​​​​​​件​​​​​​​，它​​​​​​​可​​​​​​​启​​​​​​​用​​​​​​​ yum 来​​​​​​​选​​​​​​​择​​​​​​​镜​​​​​​​像​​​​​​​列​​​​​​​表​​​​​​​中​​​​​​​最​​​​​​​快​​​​​​​的​​​​​​​仓​​​​​​​库​​​​​​​。​​​​​​​

已​​​​​​​将​​​​​​​ Samba 复​​​​​​​位​​​​​​​至​​​​​​​上​​​​​​​游​​​​​​​版​​​​​​​本​​​​​​​ 3.2.0。​​​​​​​这​​​​​​​修​​​​​​​复​​​​​​​了​​​​​​​几​​​​​​​个​​​​​​​ bug，其​​​​​​​中​​​​​​​包​​​​​​​括​​​​​​​不​​​​​​​允​​​​​​​许​​​​​​​用​​​​​​​户​​​​​​​加​​​​​​​入​​​​​​​将​​​​​​​ Windows 2003 作​​​​​​​为​​​​​​​其​​​​​​​名​​​​​​​称​​​​​​​服​​​​​​​务​​​​​​​器​​​​​​​的​​​​​​​域​​​​​​​。​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​还​​​​​​​修​​​​​​​复​​​​​​​了​​​​​​​在​​​​​​​使​​​​​​​用​​​​​​​ net rpc changetrustpw 更​​​​​​​改​​​​​​​密​​​​​​​码​​​​​​​后​​​​​​​导​​​​​​​致​​​​​​​ samba 域​​​​​​​成​​​​​​​员​​​​​​​破​​​​​​​坏​​​​​​​的​​​​​​​ bug。​​​​​​​

For a more comprehensive list of upstream samba updates included this release, refer to http://www.samba.org/samba/history/samba-3.0.32.html

已​​​​​​​将​​​​​​​ OpenLDAP 复​​​​​​​位​​​​​​​至​​​​​​​上​​​​​​​游​​​​​​​版​​​​​​​本​​​​​​​ 2.3.43。​​​​​​​这​​​​​​​采​​​​​​​用​​​​​​​了​​​​​​​几​​​​​​​个​​​​​​​上​​​​​​​游​​​​​​​ bug 修​​​​​​​复​​​​​​​，其​​​​​​​中​​​​​​​包​​​​​​​括​​​​​​​：

红​​​​​​​帽​​​​​​​现​​​​​​​在​​​​​​​为​​​​​​​ OpenLDAP 发​​​​​​​布​​​​​​​额​​​​​​​外​​​​​​​重​​​​​​​复​​​​​​​占​​​​​​​位​​​​​​​。​​​​​​​除​​​​​​​ syncprov 外​​​​​​​，所​​​​​​​有​​​​​​​重​​​​​​​复​​​​​​​占​​​​​​​位​​​​​​​都​​​​​​​可​​​​​​​在​​​​​​​独​​​​​​​立​​​​​​​的​​​​​​​ openldap-servers-overlays 软​​​​​​​件​​​​​​​包​​​​​​​中​​​​​​​找​​​​​​​到​​​​​​​，并​​​​​​​作​​​​​​​为​​​​​​​可​​​​​​​动​​​​​​​态​​​​​​​载​​​​​​​入​​​​​​​的​​​​​​​模​​​​​​​块​​​​​​​编​​​​​​​译​​​​​​​。​​​​​​​syncprov 重​​​​​​​复​​​​​​​占​​​​​​​位​​​​​​​是​​​​​​​到​​​​​​​ OpenLDAP 服​​​​​​​务​​​​​​​器​​​​​​​的​​​​​​​静​​​​​​​态​​​​​​​链​​​​​​​接​​​​​​​，用​​​​​​​来​​​​​​​维​​​​​​​护​​​​​​​和​​​​​​​其​​​​​​​它​​​​​​​旧​​​​​​​的​​​​​​​ OpenLDAP 发​​​​​​​行​​​​​​​本​​​​​​​之​​​​​​​间​​​​​​​的​​​​​​​兼​​​​​​​容​​​​​​​性​​​​​​​。​​​​​​​

因​​​​​​​为​​​​​​​ xterm 二​​​​​​​进​​​​​​​制​​​​​​​程​​​​​​​序​​​​​​​已​​​​​​​配​​​​​​​置​​​​​​​了​​​​​​​组​​​​​​​群​​​​​​​ ID 设​​​​​​​置​​​​​​​字​​​​​​​节​​​​​​​（setgid），但​​​​​​​没​​​​​​​有​​​​​​​设​​​​​​​置​​​​​​​某​​​​​​​些​​​​​​​特​​​​​​​定​​​​​​​环​​​​​​​境​​​​​​​变​​​​​​​量​​​​​​​（比​​​​​​​如​​​​​​​ LD_LIBRARY_PATH 和​​​​​​​ TMPDIR）。​​​​​​​在​​​​​​​这​​​​​​​个​​​​​​​发​​​​​​​行​​​​​​​本​​​​​​​中​​​​​​​，xterm 二​​​​​​​进​​​​​​​制​​​​​​​程​​​​​​​序​​​​​​​现​​​​​​​在​​​​​​​配​​​​​​​置​​​​​​​了​​​​​​​模​​​​​​​式​​​​​​​ 0755 权​​​​​​​限​​​​​​​，这​​​​​​​样​​​​​​​就​​​​​​​解​​​​​​​决​​​​​​​了​​​​​​​这​​​​​​​个​​​​​​​问​​​​​​​题​​​​​​​。​​​​​​​

The recommended method for balancing the load on NIS servers when multiple machines are connecting with ypbind has changed with this release. The ypbind daemon's behavior has not changed: it still pings all NIS servers listed in the /etc/ypbind configuration file and then binds to the single fastest-responding server. Before, it was recommended to list all available NIS servers in each machine's /etc/ypbind.conf configuration file. However, because even servers under high load can respond quickly to this ping, thus inadvertently increasing their own load, it is now recommended for administrators to list a smaller number of available NIS servers in each machine's ypbind.conf, and to vary this list across machines. In this way, NIS servers are automatically load-balanced due to not every NIS server being listed as being available to every machine.

已​​​​​​​将​​​​​​​ OpenMotif 复​​​​​​​位​​​​​​​至​​​​​​​上​​​​​​​游​​​​​​​版​​​​​​​本​​​​​​​ 2.3.1。​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​采​​​​​​​用​​​​​​​以​​​​​​​下​​​​​​​ bug 修​​​​​​​复​​​​​​​，其​​​​​​​中​​​​​​​包​​​​​​​括​​​​​​​：

已​​​​​​​将​​​​​​​ dbus 复​​​​​​​位​​​​​​​至​​​​​​​版​​​​​​​本​​​​​​​ 1.1.2。​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​修​​​​​​​复​​​​​​​了​​​​​​​多​​​​​​​线​​​​​​​程​​​​​​​程​​​​​​​序​​​​​​​可​​​​​​​能​​​​​​​导​​​​​​​致​​​​​​​ dbus 中​​​​​​​死​​​​​​​锁​​​​​​​的​​​​​​​ bug。​​​​​​​在​​​​​​​之​​​​​​​前​​​​​​​的​​​​​​​发​​​​​​​行​​​​​​​本​​​​​​​中​​​​​​​，因​​​​​​​为​​​​​​​一​​​​​​​个​​​​​​​线​​​​​​​程​​​​​​​侦​​​​​​​听​​​​​​​ dbus 并​​​​​​​处​​​​​​​理​​​​​​​信​​​​​​​息​​​​​​​，第​​​​​​​二​​​​​​​个​​​​​​​线​​​​​​​程​​​​​​​将​​​​​​​发​​​​​​​送​​​​​​​信​​​​​​​息​​​​​​​至​​​​​​​ dbus。​​​​​​​

已​​​​​​​将​​​​​​​ strace 复​​​​​​​位​​​​​​​至​​​​​​​版​​​​​​​本​​​​​​​ 4.5.18。​​​​​​​这​​​​​​​修​​​​​​​复​​​​​​​了​​​​​​​几​​​​​​​个​​​​​​​ bug，其​​​​​​​中​​​​​​​包​​​​​​​括​​​​​​​：

已​​​​​​​将​​​​​​​ cpuspeed 更​​​​​​​新​​​​​​​至​​​​​​​版​​​​​​​本​​​​​​​ 1.2.1-5。​​​​​​​在​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​中​​​​​​​，如​​​​​​​果​​​​​​​其​​​​​​​它​​​​​​​所​​​​​​​有​​​​​​​模​​​​​​​块​​​​​​​载​​​​​​​入​​​​​​​失​​​​​​​败​​​​​​​，cpuspeed init 脚​​​​​​​本​​​​​​​现​​​​​​​在​​​​​​​会​​​​​​​载​​​​​​​入​​​​​​​ speedstep-centrino 模​​​​​​​块​​​​​​​。​​​​​​​另​​​​​​​外​​​​​​​现​​​​​​​在​​​​​​​还​​​​​​​修​​​​​​​复​​​​​​​了​​​​​​​导​​​​​​​致​​​​​​​ Powernow-k8 无​​​​​​​法​​​​​​​载​​​​​​​入​​​​​​​的​​​​​​​用​​​​​​​户​​​​​​​空​​​​​​​间​​​​​​​ bug。​​​​​​​

已​​​​​​​从​​​​​​​这​​​​​​​个​​​​​​​发​​​​​​​布​​​​​​​中​​​​​​​完​​​​​​​全​​​​​​​删​​​​​​​除​​​​​​​了​​​​​​​工​​​​​​​具​​​​​​​的​​​​​​​ frysk 套​​​​​​​件​​​​​​​。​​​​​​​frysk 是​​​​​​​在​​​​​​​红​​​​​​​帽​​​​​​​企​​​​​​​业​​​​​​​版​​​​​​​ Linux 5.0 中​​​​​​​作​​​​​​​为​​​​​​​技​​​​​​​术​​​​​​​预​​​​​​​览​​​​​​​引​​​​​​​进​​​​​​​的​​​​​​​。​​​​​​​

之​​​​​​​前​​​​​​​，iostat -x 命​​​​​​​令​​​​​​​提​​​​​​​供​​​​​​​的​​​​​​​分​​​​​​​区​​​​​​​ I/O 统​​​​​​​计​​​​​​​不​​​​​​​完​​​​​​​整​​​​​​​。​​​​​​​在​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​中​​​​​​​，现​​​​​​​在​​​​​​​使​​​​​​​用​​​​​​​同​​​​​​​一​​​​​​​个​​​​​​​方​​​​​​​法​​​​​​​计​​​​​​​算​​​​​​​分​​​​​​​区​​​​​​​统​​​​​​​计​​​​​​​，并​​​​​​​作​​​​​​​为​​​​​​​磁​​​​​​​盘​​​​​​​统​​​​​​​计​​​​​​​，在​​​​​​​分​​​​​​​区​​​​​​​级​​​​​​​别​​​​​​​提​​​​​​​供​​​​​​​完​​​​​​​整​​​​​​​ I/O 统​​​​​​​计​​​​​​​。​​​​​​​

发​​​​​​​现​​​​​​​一​​​​​​​个​​​​​​​ Dovecot 邮​​​​​​​件​​​​​​​服​​​​​​​务​​​​​​​器​​​​​​​配​​​​​​​置​​​​​​​文​​​​​​​件​​​​​​​的​​​​​​​密​​​​​​​码​​​​​​​泄​​​​​​​露​​​​​​​的​​​​​​​漏​​​​​​​洞​​​​​​​。​​​​​​​如​​​​​​​果​​​​​​​某​​​​​​​个​​​​​​​系​​​​​​​统​​​​​​​定​​​​​​​义​​​​​​​了​​​​​​​ ssl_key_password 选​​​​​​​项​​​​​​​，所​​​​​​​有​​​​​​​本​​​​​​​地​​​​​​​用​​​​​​​户​​​​​​​都​​​​​​​可​​​​​​​以​​​​​​​浏​​​​​​​览​​​​​​​ SSL 密​​​​​​​钥​​​​​​​密​​​​​​​码​​​​​​​。​​​​​​​（CVE-2008-4870）

To better protect even this value, however, the dovecot.conf file now supports the "!include_try" directive. The ssl_key_password option should be moved from dovecot.conf to a new file owned by, and only readable and writable by, root (ie 0600). This file should be referenced from dovecot.conf by setting the !include_try /path/to/password/file option.

已​​​​​​​将​​​​​​​ ksh 复​​​​​​​位​​​​​​​至​​​​​​​版​​​​​​​本​​​​​​​ 2008-02-02。​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​添​​​​​​​加​​​​​​​了​​​​​​​多​​​​​​​字​​​​​​​节​​​​​​​字​​​​​​​符​​​​​​​处​​​​​​​理​​​​​​​、​​​​​​​讨​​​​​​​论​​​​​​​了​​​​​​​很​​​​​​​多​​​​​​​任​​​​​​​务​​​​​​​控​​​​​​​制​​​​​​​问​​​​​​​题​​​​​​​并​​​​​​​采​​​​​​​用​​​​​​​了​​​​​​​一​​​​​​​些​​​​​​​来​​​​​​​自​​​​​​​上​​​​​​​游​​​​​​​的​​​​​​​ bug 修​​​​​​​复​​​​​​​。​​​​​​​请​​​​​​​注​​​​​​​意​​​​​​​：ksh 的​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​保​​​​​​​留​​​​​​​了​​​​​​​对​​​​​​​现​​​​​​​有​​​​​​​脚​​​​​​​本​​​​​​​的​​​​​​​兼​​​​​​​容​​​​​​​。​​​​​​​

vmconvert 中​​​​​​​的​​​​​​​一​​​​​​​个​​​​​​​ bug 使​​​​​​​其​​​​​​​无​​​​​​​法​​​​​​​在​​​​​​​ vmur 设​​​​​​​备​​​​​​​节​​​​​​​点​​​​​​​（/dev/0.0.000c）中​​​​​​​正​​​​​​​常​​​​​​​工​​​​​​​作​​​​​​​。​​​​​​​这​​​​​​​导​​​​​​​致​​​​​​​在​​​​​​​试​​​​​​​图​​​​​​​访​​​​​​​问​​​​​​​ vmur 设​​​​​​​备​​​​​​​中​​​​​​​的​​​​​​​转​​​​​​​储​​​​​​​时​​​​​​​ vmconvert 失​​​​​​​败​​​​​​​，出​​​​​​​错​​​​​​​信​​​​​​​息​​​​​​​：vmconvert: Open dump file failed! (Permission denied)。​​​​​​​在​​​​​​​这​​​​​​​个​​​​​​​发​​​​​​​行​​​​​​​本​​​​​​​中​​​​​​​更​​​​​​​新​​​​​​​到​​​​​​​ s390utils 即​​​​​​​可​​​​​​​解​​​​​​​决​​​​​​​这​​​​​​​个​​​​​​​问​​​​​​​题​​​​​​​。​​​​​​​

s390utils 软​​​​​​​件​​​​​​​包​​​​​​​中​​​​​​​缺​​​​​​​少​​​​​​​ mon_procd 守​​​​​​​护​​​​​​​进​​​​​​​程​​​​​​​和​​​​​​​ mon_fsstatd 守​​​​​​​护​​​​​​​进​​​​​​​程​​​​​​​的​​​​​​​ init 脚​​​​​​​本​​​​​​​和​​​​​​​ config 文​​​​​​​件​​​​​​​。​​​​​​​因​​​​​​​此​​​​​​​无​​​​​​​法​​​​​​​创​​​​​​​建​​​​​​​并​​​​​​​使​​​​​​​用​​​​​​​这​​​​​​​些​​​​​​​守​​​​​​​护​​​​​​​进​​​​​​​程​​​​​​​。​​​​​​​在​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​中​​​​​​​添​​​​​​​加​​​​​​​了​​​​​​​这​​​​​​​些​​​​​​​缺​​​​​​​少​​​​​​​的​​​​​​​文​​​​​​​件​​​​​​​，从​​​​​​​而​​​​​​​解​​​​​​​决​​​​​​​了​​​​​​​这​​​​​​​个​​​​​​​问​​​​​​​题​​​​​​​。​​​​​​​

现​​​​​​​在​​​​​​​修​​​​​​​复​​​​​​​了​​​​​​​无​​​​​​​法​​​​​​​在​​​​​​​这​​​​​​​个​​​​​​​构​​​​​​​架​​​​​​​中​​​​​​​重​​​​​​​新​​​​​​​载​​​​​​​入​​​​​​​ ehci_hcd 模​​​​​​​块​​​​​​​的​​​​​​​ bug。​​​​​​​这​​​​​​​确​​​​​​​保​​​​​​​了​​​​​​​在​​​​​​​使​​​​​​​用​​​​​​​ ehci_hcd 模​​​​​​​块​​​​​​​时​​​​​​​，Belkin 4-port PCI-Express USB Lily 适​​​​​​​配​​​​​​​器​​​​​​​（以​​​​​​​及​​​​​​​其​​​​​​​它​​​​​​​类​​​​​​​似​​​​​​​的​​​​​​​设​​​​​​​备​​​​​​​）现​​​​​​​在​​​​​​​可​​​​​​​以​​​​​​​在​​​​​​​红​​​​​​​帽​​​​​​​企​​​​​​​业​​​​​​​版​​​​​​​ Linux 5 中​​​​​​​正​​​​​​​常​​​​​​​工​​​​​​​作​​​​​​​。​​​​​​​

现​​​​​​​已​​​​​​​将​​​​​​​ libhugetlbfs 复​​​​​​​位​​​​​​​至​​​​​​​版​​​​​​​本​​​​​​​ 1.3。​​​​​​​这​​​​​​​个​​​​​​​更​​​​​​​新​​​​​​​采​​​​​​​用​​​​​​​了​​​​​​​一​​​​​​​些​​​​​​​出​​​​​​​现​​​​​​​可​​​​​​​的​​​​​​​上​​​​​​​游​​​​​​​改​​​​​​​进​​​​​​​，因​​​​​​​此​​​​​​​提​​​​​​​高​​​​​​​了​​​​​​​使​​​​​​​用​​​​​​​ Huge 页​​​​​​​面​​​​​​​应​​​​​​​用​​​​​​​程​​​​​​​序​​​​​​​的​​​​​​​性​​​​​​​能​​​​​​​。​​​​​​​

更​​​​​​​新​​​​​​​到​​​​​​​ libhugetlbfs 的​​​​​​​完​​​​​​​整​​​​​​​列​​​​​​​表​​​​​​​请​​​​​​​参​​​​​​​考​​​​​​​以​​​​​​​下​​​​​​​链​​​​​​​接​​​​​​​：

http://sourceforge.net/mailarchive/message.php?msg_name=20080515170754.GA1830%40us.ibm.com