8.5. 使用 network RHEL 系统角色配置 VLAN 标记

流程

1. 创建包含以下内容的 playbook 文件，如 ~/vlan-ethernet.yml ：

   ---
   - name: Configure the network
     hosts: managed-node-01.example.com
     tasks:
     - name: Configure a VLAN that uses an Ethernet connection
       include_role:
         name: rhel-system-roles.network
   
       vars:
         network_connections:
           # Add an Ethernet profile for the underlying device of the VLAN
           - name: enp1s0
             type: ethernet
             interface_name: enp1s0
             autoconnect: yes
             state: up
             ip:
               dhcp4: no
               auto6: no
   
           # Define the VLAN profile
           - name: enp1s0.10
             type: vlan
             ip:
               address:
                 - "192.0.2.1/24"
                 - "2001:db8:1::1/64"
               gateway4: 192.0.2.254
               gateway6: 2001:db8:1::fffe
               dns:
                 - 192.0.2.200
                 - 2001:db8:1::ffbb
               dns_search:
                 - example.com
             vlan_id: 10
             parent: enp1s0
             state: up

   Copy to Clipboard Toggle word wrap

   VLAN 配置文件中的 parent 属性将 VLAN 配置为在 enp1s0 设备之上运行。

2. 运行 playbook：

   # ansible-playbook ~/vlan-ethernet.yml

   Copy to Clipboard Toggle word wrap