此内容没有您所选择的语言版本。

Chapter 2. To Create a New Route

Abstract

This tutorial walks you through the process of creating a new Fuse project, adding a route to it, and adding two endpoints to the route. It assumes that you have already set up your workspace and that Red Hat JBoss Fuse Tooling is running inside Red Hat JBoss Developer Studio.

Goals
复制链接

In this tutorial you will:

create a Fuse project
create a new routing context
create a route
- add endpoints to the route
- connect the endpoints
- configure the endpoints
create a folder in your project to store test messages that you create for your route
create the test messages

Prerequisites
复制链接

Note

You can use Fuse Integration perspective to work through all of the tutorials in this guide. However, because JBoss perspective provides more room for the route editor's canvas to expand as you build the routing context, this and other tutorials use JBoss perspective.

As you proceed through the remaining tutorials, you may find that you prefer using Fuse Integration perspective exclusively.

When you first start up JBoss Developer Studio, it opens in JBoss perspective, as shown in Figure 2.1, “JBoss View on initial startup”.

Figure 2.1. JBoss View on initial startup

To provide more space for the canvas to expand as you build your projects:

Close the JBoss Central tab.
Note
You can reopen a view whenever you need it. You can also drag the border of a view or panel to increase or decrease the space it occupies in the workspace.
Close the JMX Navigator view at bottom, left of the workspace.
Drag Outline view from top, right of the workspace, and drop it in the spot previously occupied by the JMX Navigator view.

Your JBoss perspective should now look like that shown in Figure 2.2, “JBoss View rearranged ”:

Figure 2.2. JBoss View rearranged

Note

You can restore an open perspective to its original, default layout at any time by right-clicking the perspective's icon on the menubar to open its context menu, and then clicking Reset.

Creating the Fuse project
复制链接

To create a Fuse project, in JBoss perspective:

On the Toolbar, select File New Fuse Project to open the New Fuse project wizard, as shown in Figure 2.3.
Figure 2.3. New Fuse project location page

View larger image
Enter CBRroute in the Project Name field.
Click Next> to open the New Fuse Project details page, as shown in Figure 2.4.
Figure 2.4. New Fuse project details page

View larger image
Select camel-archetype-blueprint.
Enter tutorial in the Group Id: field.
Enter cbr-route in the Artifact Id: field.
The Version: field defaults to 1.0.0-SNAPSHOT. To change it, enter a different version identifier.
The Package: field defaults to tutorial.cbr.route, the name of the package that contains camel-archetype-blueprint. To include the route in a different package, enter the name of that package.
Click Finish.
Note
Click No when the Open Associated Perspective? dialog asks whether you want to open the Fuse Integration perspective now.
This procedure creates a Fuse project, CBRroute, in Project Explorer that contains everything needed to create and run routes. As shown in Figure 2.5, the files generated for CBRroute include:
- CBRroute/pom.xml (Maven project file)
- CBRroute/src/main/resources/OSGI-INF/blueprint/blueprint.xml (Blueprint XML file containing the routing rules)
  Figure 2.5. Generated project files
  
  View larger image

Note

When you create a new project, the Fuse Tooling downloads from the Maven repository all of the files it needs to build the project. This operation can take several minutes.

Creating the new routing context
复制链接

To create the new routing context:

In Project Explorer, locate CBRroute/src/main/resources/OSGI-INF/blueprint/blueprint.xml.
Right-click it to open the context menu, then select Delete.
You're going to replace the old blueprint.xml file with your own to create a new route.
In the Delete dialog, click OK to confirm the operation.
In Project Explorer, select CBRroute/src/main/resources/OSGI-INF/blueprint.
Right-click it to open the context menu.
Select New Camel XML File to open the Camel XML File wizard, as shown in Figure 2.6.
Figure 2.6. Camel XML File wizard

View larger image
Check that /CBRroute/src/main/resources/OSGI-INF/blueprint appears in the Container: field. Otherwise enter it manually, or select it using the button.
Note
The button opens a dialog that displays the folders of all active projects, which you can browse to find and select the files you need.
Check that camelContext.xml appears in the File Name: field. Otherwise enter it manually.
Check that OSGI Blueprint appears in the Framework field, or select it from the field's drop-down list.
Click Finish.
The camelContext.xml file opens in the route editor's Design view, displayed as an empty canvas, as shown in Figure 2.7.
Figure 2.7. New camelContext .xml file in Design view

View larger image
Click the Source tab at the bottom, left of the canvas to open the new camelContext.xml file in the route editor's Source view, as shown in Figure 2.8, “New camelContext file in source view”.
Figure 2.8. New camelContext file in source view

View larger image

Creating the route
复制链接

To create the route:

Click the Design tab at the bottom, left of the canvas to return to the route editor's Design view.
Drag a File component ( ) from the Palette's Components drawer to the canvas.
Note
The File component changes to a file:directoryNam... node on the canvas.
Drag another File component from the Palette's Components drawer to the canvas.
Select the first file:directoryName node you dragged onto the canvas.
The Properties editor, located below the canvas, displays the node's property fields for editing.
In the Properties editor, select the Advanced tab:

View larger image

You need to create a folder for the project's source data and enter that folder's name in the Directory Name field.
In Project Explorer, right-click CBRroute/src to open the context menu.
Select New Folder to open the New Folder wizard:

View larger image
Check that CBRroute/src appears in the Enter or select the parent folder: field. Otherwise enter it manually, or select it from the graphical representation of the project's hierarchy.
In the Folder name: field, enter data, and then click Finish.
The new data folder appears in Project Explorer, under the src folder:

View larger image
Return to the Advanced tab, in the Properties editor.
On the Path tab, click the button next to the Directory Name field, to browse to the src/data folder you just created in your CBRRoute project.
Click Open.
The full path appears in the Directory Name field.
Delete everything in the path string, except src/data:

View larger image
Click the Consumer tab, and enable the Noop option by clicking its check box.
The Noop option prevents the message#.xml files being deleted from the src/data folder, and it enables idempotency to ensure that each message#.xml file is consumed only once.
Click the Generic tab to open the file node's Details page
Figure 2.9. File Details page

View larger image

The tooling automatically populates the Uri field with the Directory name and Noop properties you configured on the Advanced tab.
Select the second file:directoryName node you dragged onto the canvas.
In the Generic tab's Uri field, replace directoryName with target/messages/others. Leave the other fields blank.
Figure 2.10. File destination property editor

View larger image

Note
The target/messages/others folder will be created at runtime.
On the canvas, select the first file: node (file:src/data?noop=true), and drag it's connector arrow ( ) to the second file node (file:target/messages/others), then release it.
A segmented line connects the two endpoints, as shown in Figure 2.11.
Figure 2.11. Completed route, diagram view

View larger image

Note
You can drag the line's bendpoint (orange dot) to change the angle of the line's segments. Doing so creates two new bendpoints, one on either side of the original. This behavior enables you to easily adjust your diagram to accommodate increasingly complex routes.
To quickly align the connected endpoints, right-click the canvas to open the context menu, and then select Layout Diagram.
Select File Save to save the route.

Click the Source tab at bottom, left of the canvas.

Source view displays the XML for the route. The camelContext element will look like Example 2.1.

Example 2.1. XML for CBRroute

<?xml version="1.0" encoding="UTF-8"?>
 <blueprint xmlns="http://www.osgi.org/xmlns/blueprint/v1.0.0"
       xmlns:camel="http://camel.apache.org/schema/blueprint"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="http://www.osgi.org/xmlns/blueprint/v1.0.0 
           http://www.osgi.org/xmlns/blueprint/v1.0.0/blueprint.xsd
       http://camel.apache.org/schema/blueprint 
           http://camel.apache.org/schema/blueprint/camel-blueprint.xsd">

   <camelContext trace="false" xmlns="http://camel.apache.org/schema/blueprint">
     <route>
        <from uri="file:src/data?noop=true"/>
        <to uri="file:target/messages/others"/>
     </route>
   </camelContext>

 </blueprint>

<?xml version="1.0" encoding="UTF-8"?>
 <blueprint xmlns="http://www.osgi.org/xmlns/blueprint/v1.0.0"
       xmlns:camel="http://camel.apache.org/schema/blueprint"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="http://www.osgi.org/xmlns/blueprint/v1.0.0 
           http://www.osgi.org/xmlns/blueprint/v1.0.0/blueprint.xsd
       http://camel.apache.org/schema/blueprint 
           http://camel.apache.org/schema/blueprint/camel-blueprint.xsd">

   <camelContext trace="false" xmlns="http://camel.apache.org/schema/blueprint">
     <route>
        <from uri="file:src/data?noop=true"/>
        <to uri="file:target/messages/others"/>
     </route>
   </camelContext>

 </blueprint>

Copy to Clipboard

Toggle word wrap

Creating test messages
复制链接

Before you can run your route, you need to create test messages to send through it.

In Project Explorer, right-click CBRroute to open the context menu.
Click New Fuse Message to open the Fuse Message File wizard:

View larger image
Check that CBRroute/src/data appears in the Enter or select the parent folder field. Otherwise enter it manually, or select it from the graphical representation of the project's hierarchy.
In File Name:, enter message1.xml.
Click Finish to open the test message, message1.xml, in Design View:

View larger image
Click the Source tab at the bottom, right of the canvas to switch to Source view:

View larger image

In Source view, enter this text:

<?xml version="1.0" encoding="UTF-8"?>
                        
<order>
  <customer>
    <name>Brooklyn Zoo</name>
    <city>Brooklyn</city>
    <country>USA</country>
  </customer>
  <orderline>
    <animal>wombat</animal>
    <quantity>15</quantity>
    <maxAllowed>25</maxAllowed>
  </orderline>
</order>

<?xml version="1.0" encoding="UTF-8"?>
                        
<order>
  <customer>
    <name>Brooklyn Zoo</name>
    <city>Brooklyn</city>
    <country>USA</country>
  </customer>
  <orderline>
    <animal>wombat</animal>
    <quantity>15</quantity>
    <maxAllowed>25</maxAllowed>
  </orderline>
</order>

Copy to Clipboard

Toggle word wrap

Save the file.

Click Messages.zip to download the five remaining preconstructed test message files (message2.xml through message6.xml), and then unpack them into the CBRroute/src/data folder. You will use all six test messages in the remaining Fuse Tooling tutorials.

Table 2.1 shows the contents of each preconstructed message file.

Expand

Table 2.1. Preconstructed test messages
msg#	<name>	<city>	<country>	<animal>	<quantity>	<maxAllowed>
2	San Diego Zoo	San Diego	USA	giraffe	3	2
3	London Zoo	London	Great Britain	penguin	12	20
4	Bristol Zoo	Bristol	Great Britain	emu	5	4
5	Paris Zoo	Paris	France	giraffe	2	2
6	Hellabrunn Gardens	Munich	Germany	penguin	18	20

Next steps
复制链接

After you have created and designed your route, you can run it by deploying it into your local Apache Camel runtime, as described in Chapter 3, To Run a Route.

此内容没有您所选择的语言版本。

Chapter 2. To Create a New Route

Goals
复制链接

Prerequisites
复制链接

Creating the Fuse project
复制链接

Creating the new routing context
复制链接

Creating the route
复制链接

Creating test messages
复制链接

Next steps
复制链接

Further reading
复制链接

学习

尝试、购买和销售

社区

关于红帽文档

让开源更具包容性

關於紅帽

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links

此内容没有您所选择的语言版本。

Chapter 2. To Create a New Route

Goals复制链接链接已复制到粘贴板!

Prerequisites复制链接链接已复制到粘贴板!

Creating the Fuse project复制链接链接已复制到粘贴板!

Creating the new routing context复制链接链接已复制到粘贴板!

Creating the route复制链接链接已复制到粘贴板!

Creating test messages复制链接链接已复制到粘贴板!

Next steps复制链接链接已复制到粘贴板!

Further reading复制链接链接已复制到粘贴板!

学习

尝试、购买和销售

社区

关于红帽文档

让开源更具包容性

關於紅帽

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links

Goals
复制链接

Prerequisites
复制链接

Creating the Fuse project
复制链接

Creating the new routing context
复制链接

Creating the route
复制链接

Creating test messages
复制链接

Next steps
复制链接

Further reading
复制链接