支持控制台（Console）开发人员开始试用联系人

此内容没有您所选择的语言版本。

2.3. Exception Handling

Abstract

Apache Camel provides several different mechanisms, which let you handle exceptions at different levels of granularity: you can handle exceptions within a route using doTry, doCatch, and doFinally; or you can specify what action to take for each exception type and apply this rule to all routes in a RouteBuilder using onException; or you can specify what action to take for all exception types and apply this rule to all routes in a RouteBuilder using errorHandler.
For more details about exception handling, see Section 6.3, “Dead Letter Channel”.

2.3.1. onException Clause

Overview

The onException clause is a powerful mechanism for trapping exceptions that occur in one or more routes: it is type-specific, enabling you to define distinct actions to handle different exception types; it allows you to define actions using essentially the same (actually, slightly extended) syntax as a route, giving you considerable flexibility in the way you handle exceptions; and it is based on a trapping model, which enables a single onException clause to deal with exceptions occurring at any node in any route.

Trapping exceptions using onException

The onException clause is a mechanism for trapping, rather than catching exceptions. That is, once you define an onException clause, it traps exceptions that occur at any point in a route. This contrasts with the Java try/catch mechanism, where an exception is caught, only if a particular code fragment is explicitly enclosed in a try block.
What really happens when you define an onException clause is that the Apache Camel runtime implicitly encloses each route node in a try block. This is why the onException clause is able to trap exceptions at any point in the route. But this wrapping is done for you automatically; it is not visible in the route definitions.

Java DSL example

In the following Java DSL example, the onException clause applies to all of the routes defined in the RouteBuilder class. If a ValidationException exception occurs while processing either of the routes (from("seda:inputA") or from("seda:inputB")), the onException clause traps the exception and redirects the current exchange to the validationFailed JMS queue (which serves as a deadletter queue). 
// Java
public class MyRouteBuilder extends RouteBuilder {

  public void configure() {
    onException(ValidationException.class)
      .to("activemq:validationFailed");
  
    from("seda:inputA")
      .to("validation:foo/bar.xsd", "activemq:someQueue");

    from("seda:inputB").to("direct:foo")
      .to("rnc:mySchema.rnc", "activemq:anotherQueue");
  }
}

XML DSL example

The preceding example can also be expressed in the XML DSL, using the onException element to define the exception clause, as follows: 
<beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:camel="http://camel.apache.org/schema/spring"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="
    http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
    http://camel.apache.org/schema/spring http://camel.apache.org/schema/spring/camel-spring.xsd">
    
    <camelContext xmlns="http://camel.apache.org/schema/spring">
        <onException>
            <exception>com.mycompany.ValidationException</exception>
            <to uri="activemq:validationFailed"/>
        </onException>
        <route>
            <from uri="seda:inputA"/>
            <to uri="validation:foo/bar.xsd"/>
            <to uri="activemq:someQueue"/>
        </route>
        <route>
            <from uri="seda:inputB"/>
            <to uri="rnc:mySchema.rnc"/>
            <to uri="activemq:anotherQueue"/>
        </route>
    </camelContext>
    
</beans>

Trapping multiple exceptions

You can define multiple onException clauses to trap exceptions in a RouteBuilder scope. This enables you to take different actions in response to different exceptions. For example, the following series of onException clauses defined in the Java DSL define different deadletter destinations for ValidationException, IOException, and Exception: 
onException(ValidationException.class).to("activemq:validationFailed");
onException(java.io.IOException.class).to("activemq:ioExceptions");
onException(Exception.class).to("activemq:exceptions");
You can define the same series of onException clauses in the XML DSL as follows: 
<onException>
    <exception>com.mycompany.ValidationException</exception>
    <to uri="activemq:validationFailed"/>
</onException>
<onException>
    <exception>java.io.IOException</exception>
    <to uri="activemq:ioExceptions"/>
</onException>
<onException>
    <exception>java.lang.Exception</exception>
    <to uri="activemq:exceptions"/>
</onException>
You can also group multiple exceptions together to be trapped by the same onException clause. In the Java DSL, you can group multiple exceptions as follows: 
onException(ValidationException.class, BuesinessException.class)
  .to("activemq:validationFailed");
In the XML DSL, you can group multiple exceptions together by defining more than one exception element inside the onException element, as follows: 
<onException>
    <exception>com.mycompany.ValidationException</exception>
    <exception>com.mycompany.BuesinessException</exception>
    <to uri="activemq:validationFailed"/>
</onException>
When trapping multiple exceptions, the order of the onException clauses is significant. Apache Camel initially attempts to match the thrown exception against the first clause. If the first clause fails to match, the next onException clause is tried, and so on until a match is found. Each matching attempt is governed by the following algorithm:
  1. If the thrown exception is a chained exception (that is, where an exception has been caught and rethrown as a different exception), the most nested exception type serves initially as the basis for matching. This exception is tested as follows:
    1. If the exception-to-test has exactly the type specified in the onException clause (tested using instanceof), a match is triggered.
    2. If the exception-to-test is a sub-type of the type specified in the onException clause, a match is triggered.
  2. If the most nested exception fails to yield a match, the next exception in the chain (the wrapping exception) is tested instead. The testing continues up the chain until either a match is triggered or the chain is exhausted.
Note
The throwException EIP enables you to create a new exception instance from a simple language expression. You can make it dynamic, based on the available information from the current exchange. for example, 
<throwException exceptionType="java.lang.IllegalArgumentException" message="${body}"/>

Deadletter channel

The basic examples of onException usage have so far all exploited the deadletter channel pattern. That is, when an onException clause traps an exception, the current exchange is routed to a special destination (the deadletter channel). The deadletter channel serves as a holding area for failed messages that have not been processed. An administrator can inspect the messages at a later time and decide what action needs to be taken.
For more details about the deadletter channel pattern, see Section 6.3, “Dead Letter Channel”.

Use original message

By the time an exception is raised in the middle of a route, the message in the exchange could have been modified considerably (and might not even by readable by a human). Often, it is easier for an administrator to decide what corrective actions to take, if the messages visible in the deadletter queue are the original messages, as received at the start of the route.
In the Java DSL, you can replace the message in the exchange by the original message, using the useOriginalMessage() DSL command, as follows: 
onException(ValidationException.class)
  .useOriginalMessage()
  .to("activemq:validationFailed");
In the XML DSL, you can retrieve the original message by setting the useOriginalMessage attribute on the onException element, as follows: 
<onException useOriginalMessage="true">
    <exception>com.mycompany.ValidationException</exception>
    <to uri="activemq:validationFailed"/>
</onException>
Note
By default, Camel makes a copy of the original message at the start of the route, which ensures that the original message is available when you call useOriginalMessage(). But if the setAllowUseOriginalMessage() option is set to false on the Camel context, the original message will not be accessible and you cannot call useOriginalMessage() (for example, you might want to choose this behaviour to optimize performance when processing large messages).

Redelivery policy

Instead of interrupting the processing of a message and giving up as soon as an exception is raised, Apache Camel gives you the option of attempting to redeliver the message at the point where the exception occurred. In networked systems, where timeouts can occur and temporary faults arise, it is often possible for failed messages to be processed successfully, if they are redelivered shortly after the original exception was raised.
The Apache Camel redelivery supports various strategies for redelivering messages after an exception occurs. Some of the most important options for configuring redelivery are as follows:
maximumRedeliveries()
Specifies the maximum number of times redelivery can be attempted (default is 0). A negative value means redelivery is always attempted (equivalent to an infinite value).
retryWhile()
Specifies a predicate (of Predicate type), which determines whether Apache Camel ought to continue redelivering. If the predicate evaluates to true on the current exchange, redelivery is attempted; otherwise, redelivery is stopped and no further redelivery attempts are made.
This option takes precedence over the maximumRedeliveries() option.
In the Java DSL, redelivery policy options are specified using DSL commands in the onException clause. For example, you can specify a maximum of six redeliveries, after which the exchange is sent to the validationFailed deadletter queue, as follows: 
onException(ValidationException.class)
  .maximumRedeliveries(6)
  .retryAttemptedLogLevel(org.apache.camel.LogginLevel.WARN)
  .to("activemq:validationFailed");
In the XML DSL, redelivery policy options are specified by setting attributes on the redeliveryPolicy element. For example, the preceding route can be expressed in XML DSL as follows: 
<onException useOriginalMessage="true">
    <exception>com.mycompany.ValidationException</exception>
    <redeliveryPolicy maximumRedeliveries="6"/>
    <to uri="activemq:validationFailed"/>
</onException>
The latter part of the route—after the redelivery options are set—is not processed until after the last redelivery attempt has failed. For detailed descriptions of all the redelivery options, see Section 6.3, “Dead Letter Channel”.
Alternatively, you can specify redelivery policy options in a redeliveryPolicyProfile instance. You can then reference the redeliveryPolicyProfile instance using the onException element's redeliverPolicyRef attribute. For example, the preceding route can be expressed as follows: 
<redeliveryPolicyProfile id="redelivPolicy" maximumRedeliveries="6" retryAttemptedLogLevel="WARN"/>

<onException useOriginalMessage="true" redeliveryPolicyRef="redelivPolicy">
    <exception>com.mycompany.ValidationException</exception>
    <to uri="activemq:validationFailed"/>
</onException>
Note
The approach using redeliveryPolicyProfile is useful, if you want to re-use the same redelivery policy in multiple onException clauses.

Conditional trapping

Exception trapping with onException can be made conditional by specifying the onWhen option. If you specify the onWhen option in an onException clause, a match is triggered only when the thrown exception matches the clause and the onWhen predicate evaluates to true on the current exchange.
For example, in the following Java DSL fragment,the first onException clause triggers, only if the thrown exception matches MyUserException and the user header is non-null in the current exchange: 
// Java

// Here we define onException() to catch MyUserException when
// there is a header[user] on the exchange that is not null
onException(MyUserException.class)
    .onWhen(header("user").isNotNull())
    .maximumRedeliveries(2)
    .to(ERROR_USER_QUEUE);

// Here we define onException to catch MyUserException as a kind
// of fallback when the above did not match.
// Noitce: The order how we have defined these onException is
// important as Camel will resolve in the same order as they
// have been defined
onException(MyUserException.class)
    .maximumRedeliveries(2)
    .to(ERROR_QUEUE);
The preceding onException clauses can be expressed in the XML DSL as follows: 
<redeliveryPolicyProfile id="twoRedeliveries" maximumRedeliveries="2"/>

<onException redeliveryPolicyRef="twoRedeliveries">
    <exception>com.mycompany.MyUserException</exception>
    <onWhen>
        <simple>${header.user} != null</simple>
    </onWhen>
    <to uri="activemq:error_user_queue"/>
</onException>

<onException redeliveryPolicyRef="twoRedeliveries">
    <exception>com.mycompany.MyUserException</exception>
    <to uri="activemq:error_queue"/>
</onException>

Handling exceptions

By default, when an exception is raised in the middle of a route, processing of the current exchange is interrupted and the thrown exception is propagated back to the consumer endpoint at the start of the route. When an onException clause is triggered, the behavior is essentially the same, except that the onException clause performs some processing before the thrown exception is propagated back.
But this default behavior is not the only way to handle an exception. The onException provides various options to modify the exception handling behavior, as follows:
  • the section called “Suppressing exception rethrow”—you have the option of suppressing the rethrown exception after the onException clause has completed. In other words, in this case the exception does not propagate back to the consumer endpoint at the start of the route.
  • the section called “Continuing processing”—you have the option of resuming normal processing of the exchange from the point where the exception originally occurred. Implicitly, this approach also suppresses the rethrown exception.
  • the section called “Sending a response”—in the special case where the consumer endpoint at the start of the route expects a reply (that is, having an InOut MEP), you might prefer to construct a custom fault reply message, rather than propagating the exception back to the consumer endpoint.
Note
Using a custom processor, the Camel Exception Clause and Error Handler get invoked, soon after it throws an exception using the new onExceptionOccurred option.

Suppressing exception rethrow

To prevent the current exception from being rethrown and propagated back to the consumer endpoint, you can set the handled() option to true in the Java DSL, as follows: 
onException(ValidationException.class)
  .handled(true)
  .to("activemq:validationFailed");
In the Java DSL, the argument to the handled() option can be of boolean type, of Predicate type, or of Expression type (where any non-boolean expression is interpreted as true, if it evaluates to a non-null value).
The same route can be configured to suppress the rethrown exception in the XML DSL, using the handled element, as follows: 
<onException>
    <exception>com.mycompany.ValidationException</exception>
    <handled>
        <constant>true</constant>
    </handled>
    <to uri="activemq:validationFailed"/>
</onException>

Continuing processing

To continue processing the current message from the point in the route where the exception was originally thrown, you can set the continued option to true in the Java DSL, as follows: 
onException(ValidationException.class)
  .continued(true);
In the Java DSL, the argument to the continued() option can be of boolean type, of Predicate type, or of Expression type (where any non-boolean expression is interpreted as true, if it evaluates to a non-null value).
The same route can be configured in the XML DSL, using the continued element, as follows: 
<onException>
    <exception>com.mycompany.ValidationException</exception>
    <continued>
        <constant>true</constant>
    </continued>
</onException>

Sending a response

When the consumer endpoint that starts a route expects a reply, you might prefer to construct a custom fault reply message, instead of simply letting the thrown exception propagate back to the consumer. There are two essential steps you need to follow in this case: suppress the rethrown exception using the handled option; and populate the exchange's Out message slot with a custom fault message.
For example, the following Java DSL fragment shows how to send a reply message containing the text string, Sorry, whenever the MyFunctionalException exception occurs: 
// we catch MyFunctionalException and want to mark it as handled (= no failure returned to client)
// but we want to return a fixed text response, so we transform OUT body as Sorry.
onException(MyFunctionalException.class)
    .handled(true)
    .transform().constant("Sorry");
If you are sending a fault response to the client, you will often want to incorporate the text of the exception message in the response. You can access the text of the current exception message using the exceptionMessage() builder method. For example, you can send a reply containing just the text of the exception message whenever the MyFunctionalException exception occurs, as follows: 
// we catch MyFunctionalException and want to mark it as handled (= no failure returned to client)
// but we want to return a fixed text response, so we transform OUT body and return the exception message
onException(MyFunctionalException.class)
    .handled(true)
    .transform(exceptionMessage());
The exception message text is also accessible from the Simple language, through the exception.message variable. For example, you could embed the current exception text in a reply message, as follows: 
// we catch MyFunctionalException and want to mark it as handled (= no failure returned to client)
// but we want to return a fixed text response, so we transform OUT body and return a nice message
// using the simple language where we want insert the exception message
onException(MyFunctionalException.class)
    .handled(true)
    .transform().simple("Error reported: ${exception.message} - cannot process this message.");
The preceding onException clause can be expressed in XML DSL as follows: 
<onException>
    <exception>com.mycompany.MyFunctionalException</exception>
    <handled>
        <constant>true</constant>
    </handled>
    <transform>
        <simple>Error reported: ${exception.message} - cannot process this message.</simple>
    </transform>
</onException>

Exception thrown while handling an exception

An exception that gets thrown while handling an existing exception (in other words, one that gets thrown in the middle of processing an onException clause) is handled in a special way. Such an exception is handled by the special fallback exception handler, which handles the exception as follows:
  • All existing exception handlers are ignored and processing fails immediately.
  • The new exception is logged.
  • The new exception is set on the exchange object.
The simple strategy avoids complex failure scenarios which could otherwise end up with an onException clause getting locked into an infinite loop.

Scopes

The onException clauses can be effective in either of the following scopes:
  • RouteBuilder scope—onException clauses defined as standalone statements inside a RouteBuilder.configure() method affect all of the routes defined in that RouteBuilder instance. On the other hand, these onException clauses have no effect whatsoever on routes defined inside any other RouteBuilder instance. The onException clauses must appear before the route definitions.
    All of the examples up to this point are defined using the RouteBuilder scope.
  • Route scope—onException clauses can also be embedded directly within a route. These onException clauses affect only the route in which they are defined.

Route scope

You can embed an onException clause anywhere inside a route definition, but you must terminate the embedded onException clause using the end() DSL command.
For example, you can define an embedded onException clause in the Java DSL, as follows: 
// Java
from("direct:start")
  .onException(OrderFailedException.class)
    .maximumRedeliveries(1)
    .handled(true)
    .beanRef("orderService", "orderFailed")
    .to("mock:error")
  .end()
  .beanRef("orderService", "handleOrder")
  .to("mock:result");
You can define an embedded onException clause in the XML DSL, as follows: 
<route errorHandlerRef="deadLetter">
    <from uri="direct:start"/>
    <onException>
        <exception>com.mycompany.OrderFailedException</exception>
        <redeliveryPolicy maximumRedeliveries="1"/>
        <handled>
            <constant>true</constant>
        </handled>
        <bean ref="orderService" method="orderFailed"/>
        <to uri="mock:error"/>
    </onException>
    <bean ref="orderService" method="handleOrder"/>
    <to uri="mock:result"/>
</route>

2.3.2. Error Handler

Overview

The errorHandler() clause provides similar features to the onException clause, except that this mechanism is not able to discriminate between different exception types. The errorHandler() clause is the original exception handling mechanism provided by Apache Camel and was available before the onException clause was implemented.

Java DSL example

The errorHandler() clause is defined in a RouteBuilder class and applies to all of the routes in that RouteBuilder class. It is triggered whenever an exception of any kind occurs in one of the applicable routes. For example, to define an error handler that routes all failed exchanges to the ActiveMQ deadLetter queue, you can define a RouteBuilder as follows: 
public class MyRouteBuilder extends RouteBuilder {

    public void configure() {
        errorHandler(deadLetterChannel("activemq:deadLetter"));

        // The preceding error handler applies 
        // to all of the following routes:
        from("activemq:orderQueue")
          .to("pop3://fulfillment@acme.com");
        from("file:src/data?noop=true")
          .to("file:target/messages");
        // ...
    }
}
Redirection to the dead letter channel will not occur, however, until all attempts at redelivery have been exhausted.

XML DSL example

In the XML DSL, you define an error handler within a camelContext scope using the errorHandler element. For example, to define an error handler that routes all failed exchanges to the ActiveMQ deadLetter queue, you can define an errorHandler element as follows: 
<beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:camel="http://camel.apache.org/schema/spring"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="
    http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
    http://camel.apache.org/schema/spring http://camel.apache.org/schema/spring/camel-spring.xsd">
    
    <camelContext xmlns="http://camel.apache.org/schema/spring">
        <errorHandler type="DeadLetterChannel"
                      deadLetterUri="activemq:deadLetter"/>
        <route>
            <from uri="activemq:orderQueue"/>
            <to uri="pop3://fulfillment@acme.com"/>
        </route>
        <route>
            <from uri="file:src/data?noop=true"/>
            <to uri="file:target/messages"/>
        </route>
    </camelContext>
    
</beans>

Types of error handler

Table 2.1, “Error Handler Types” provides an overview of the different types of error handler you can define.
Table 2.1. Error Handler Types
Java DSL BuilderXML DSL Type AttributeDescription
defaultErrorHandler() DefaultErrorHandler Propagates exceptions back to the caller and supports the redelivery policy, but it does not support a dead letter queue.
deadLetterChannel() DeadLetterChannel Supports the same features as the default error handler and, in addition, supports a dead letter queue.
loggingErrorChannel() LoggingErrorChannel Logs the exception text whenever an exception occurs.
noErrorHandler() NoErrorHandler Dummy handler implementation that can be used to disable the error handler.
  TransactionErrorHandler An error handler for transacted routes. A default transaction error handler instance is automatically used for a route that is marked as transacted.

2.3.3. doTry, doCatch, and doFinally

Overview

To handle exceptions within a route, you can use a combination of the doTry, doCatch, and doFinally clauses, which handle exceptions in a similar way to Java's try, catch, and finally blocks.

Similarities between doCatch and Java catch

In general, the doCatch() clause in a route definition behaves in an analogous way to the catch() statement in Java code. In particular, the following features are supported by the doCatch() clause:
  • Multiple doCatch clauses—you can have multiple doCatch clauses within a single doTry block. The doCatch clauses are tested in the order they appear, just like Java catch() statements. Apache Camel executes the first doCatch clause that matches the thrown exception.
    Note
    This algorithm is different from the exception matching algorithm used by the onException clause—see Section 2.3.1, “onException Clause” for details.
  • Rethrowing exceptions—you can rethrow the current exception from within a doCatch clause using the handled sub-clause (see the section called “Rethrowing exceptions in doCatch”).

Special features of doCatch

There are some special features of the doCatch() clause, however, that have no analogue in the Java catch() statement. The following features are specific to doCatch():

Example

The following example shows how to write a doTry block in the Java DSL, where the doCatch() clause will be executed, if either the IOException exception or the IllegalStateException exception are raised, and the doFinally() clause is always executed, irrespective of whether an exception is raised or not. 
from("direct:start")
    .doTry()
        .process(new ProcessorFail())
        .to("mock:result")
    .doCatch(IOException.class, IllegalStateException.class)
        .to("mock:catch")
    .doFinally()
        .to("mock:finally")
    .end();
Or equivalently, in Spring XML: 
<route>
    <from uri="direct:start"/>
    <!-- here the try starts. its a try .. catch .. finally just as regular java code -->
    <doTry>
        <process ref="processorFail"/>
        <to uri="mock:result"/>
        <doCatch>
            <!-- catch multiple exceptions -->
            <exception>java.io.IOException</exception>
            <exception>java.lang.IllegalStateException</exception>
            <to uri="mock:catch"/>
        </doCatch>
        <doFinally>
            <to uri="mock:finally"/>
        </doFinally>
    </doTry>
</route>

Rethrowing exceptions in doCatch

It is possible to rethrow an exception in a doCatch() clause by calling the handled() sub-clause with its argument set to false, as follows: 
from("direct:start")
    .doTry()
        .process(new ProcessorFail())
        .to("mock:result")
    .doCatch(IOException.class)
        // mark this as NOT handled, eg the caller will also get the exception
        .handled(false)
        .to("mock:io")
    .doCatch(Exception.class)
        // and catch all other exceptions
        .to("mock:error")
    .end();
In the preceding example, if the IOException is caught by doCatch(), the current exchange is sent to the mock:io endpoint, and then the IOException is rethrown. This gives the consumer endpoint at the start of the route (in the from() command) an opportunity to handle the exception as well.
The following example shows how to define the same route in Spring XML: 
<route>
    <from uri="direct:start"/>
    <doTry>
        <process ref="processorFail"/>
        <to uri="mock:result"/>
        <doCatch>
            <exception>java.io.IOException</exception>
            <!-- mark this as NOT handled, eg the caller will also get the exception -->
            <handled>
                <constant>false</constant>
            </handled>
            <to uri="mock:io"/>
        </doCatch>
        <doCatch>
            <!-- and catch all other exceptions they are handled by default (ie handled = true) -->
            <exception>java.lang.Exception</exception>
            <to uri="mock:error"/>
        </doCatch>
    </doTry>
</route>

Conditional exception catching using onWhen

A special feature of the Apache Camel doCatch() clause is that you can conditionalize the catching of exceptions based on an expression that is evaluated at run time. In other words, if you catch an exception using a clause of the form, doCatch(ExceptionList).doWhen(Expression), an exception will only be caught, if the predicate expression, Expression, evaluates to true at run time.
For example, the following doTry block will catch the exceptions, IOException and IllegalStateException, only if the exception message contains the word, Severe: 
from("direct:start")
    .doTry()
        .process(new ProcessorFail())
        .to("mock:result")
    .doCatch(IOException.class, IllegalStateException.class)
        .onWhen(exceptionMessage().contains("Severe"))
        .to("mock:catch")
    .doCatch(CamelExchangeException.class)
        .to("mock:catchCamel")
    .doFinally()
        .to("mock:finally")
    .end();
Or equivalently, in Spring XML: 
<route>
    <from uri="direct:start"/>
    <doTry>
        <process ref="processorFail"/>
        <to uri="mock:result"/>
        <doCatch>
            <exception>java.io.IOException</exception>
            <exception>java.lang.IllegalStateException</exception>
            <onWhen>
                <simple>${exception.message} contains 'Severe'</simple>
            </onWhen>
            <to uri="mock:catch"/>
        </doCatch>
        <doCatch>
            <exception>org.apache.camel.CamelExchangeException</exception>
            <to uri="mock:catchCamel"/>
        </doCatch>
        <doFinally>
            <to uri="mock:finally"/>
        </doFinally>
    </doTry>
</route>

Nested Conditions in doTry

There are various options available to add Camel exception handling to a JavaDSL route. dotry() creates a try or catch block for handling exceptions and is useful for route specific error handling.
If you want to catch the exception inside of ChoiceDefinition, you can use the following doTry blocks: 
from("direct:wayne-get-token").setExchangePattern(ExchangePattern.InOut)
           .doTry()
              .to("https4://wayne-token-service")
              .choice()
                  .when().simple("${header.CamelHttpResponseCode} == '200'")
                     .convertBodyTo(String.class)
.setHeader("wayne-token").groovy("body.replaceAll('\"','')")
                     .log(">> Wayne Token : ${header.wayne-token}")
                .endChoice()
         
doCatch(java.lang.Class (java.lang.Exception>)
              .log(">> Exception")
           .endDoTry();

from("direct:wayne-get-token").setExchangePattern(ExchangePattern.InOut)
           .doTry()
              .to("https4://wayne-token-service")
           .doCatch(Exception.class)
              .log(">> Exception")
           .endDoTry();

2.3.4. Propagating SOAP Exceptions

Overview

The Camel CXF component provides an integration with Apache CXF, enabling you to send and receive SOAP messages from Apache Camel endpoints. You can easily define Apache Camel endpoints in XML, which can then be referenced in a route using the endpoint's bean ID. For more details, see CXF in the Apache Camel Component Reference Guide.

How to propagate stack trace information

It is possible to configure a CXF endpoint so that, when a Java exception is thrown on the server side, the stack trace for the exception is marshalled into a fault message and returned to the client. To enable this feaure, set the dataFormat to PAYLOAD and set the faultStackTraceEnabled property to true in the cxfEndpoint element, as follows: 
<cxf:cxfEndpoint id="router" address="http://localhost:9002/TestMessage"
    wsdlURL="ship.wsdl"
    endpointName="s:TestSoapEndpoint"
    serviceName="s:TestService"
    xmlns:s="http://test">
  <cxf:properties>
    <!-- enable sending the stack trace back to client; the default value is false-->
    <entry key="faultStackTraceEnabled" value="true" />
    <entry key="dataFormat" value="PAYLOAD" />
  </cxf:properties>
</cxf:cxfEndpoint>
For security reasons, the stack trace does not include the causing exception (that is, the part of a stack trace that follows Caused by). If you want to include the causing exception in the stack trace, set the exceptionMessageCauseEnabled property to true in the cxfEndpoint element, as follows: 
<cxf:cxfEndpoint id="router" address="http://localhost:9002/TestMessage"
    wsdlURL="ship.wsdl"
    endpointName="s:TestSoapEndpoint"
    serviceName="s:TestService"
    xmlns:s="http://test">
  <cxf:properties>
    <!-- enable to show the cause exception message and the default value is false -->
 <entry key="exceptionMessageCauseEnabled" value="true" />
    <!-- enable to send the stack trace back to client,  the default value is false-->
    <entry key="faultStackTraceEnabled" value="true" />
    <entry key="dataFormat" value="PAYLOAD" />
  </cxf:properties>
</cxf:cxfEndpoint>
Warning
You should only enable the exceptionMessageCauseEnabled flag for testing and diagnostic purposes. It is normal practice for servers to conceal the original cause of an exception to make it harder for hostile users to probe the server.
Red Hat logoGithubRedditYoutubeTwitter

学习

尝试、购买和销售

社区

关于红帽文档

通过我们的产品和服务，以及可以信赖的内容，帮助红帽用户创新并实现他们的目标。

让开源更具包容性

红帽致力于替换我们的代码、文档和 Web 属性中存在问题的语言。欲了解更多详情，请参阅红帽博客.

關於紅帽

我们提供强化的解决方案，使企业能够更轻松地跨平台和环境（从核心数据中心到网络边缘）工作。

© 2024 Red Hat, Inc.