此内容没有您所选择的语言版本。

Chapter 1. Active Directory Integration


This chapter describes how to integrate Identity Service (keystone) with Active Directory Domain Services. In this use case, Identity Service authenticates certain Active Directory Domain Services (AD DS) users, while retaining authorization settings and critical service accounts in the Identity Service database. As a result, Identity Service has read-only access to AD DS for user account authentication, while retaining management over the privileges assigned to authenticated accounts.

Note

If you are using Red Hat OpenStack Platform director, then you will need to be aware that /etc/keystone/keystone.conf is managed by Puppet. Consequently, any custom configuration you add might be overwritten whenever you run the openstack overcloud deploy process. As a result, you might need to re-add this configuration manually each time. It is expected that a future release of director will include the Puppet parameters that will allow you to re-apply these settings automatically using a post-deployment script.

1.1. Key terms

  • Authentication - The process of using a password to verify that the user is who they claim to be.
  • Authorization - Validating that authenticated users have proper permissions to the resources they are attempting to access.
  • Domain - This term is not the same as an AD DS domain, and instead refers to the additional namespaces that are configured in Identity Service for partitioning users, groups, and projects. These separate domains can be configured to authenticate users in different LDAP or AD DS environments.

1.2. Assumptions

This example deployment makes the following assumptions:

  • Active Directory Domain Services is configured and operational.
  • Red Hat OpenStack Platform is configured and operational.
  • DNS name resolution is fully functional and all hosts are registered appropriately.
  • AD DS authentication traffic is encrypted with LDAPS, using port 636.

1.3. Impact Statement

These steps allow AD DS users to authenticate to OpenStack and access resources. OpenStack service accounts (such as keystone and glance), and authorization management (permissions, roles, projects) will remain in the Identity Service database. Permissions and roles are assigned to the AD DS accounts using Identity Service management tools.

1.3.1. High Availability options

This configuration creates a dependency on the availability of a single Active Directory Domain Controller; Project users will be affected if Identity Service is unable to authenticate to the AD Domain Controller. A number of options are available to manage this risk; for example, you might configure Identity Service to query a DNS alias or a load balancing appliance, rather than an individual AD Domain Controller. You can also configure keystone to query a different Domain Controller, should one become unavailable. See Section 1.14, “Configure for high availability” for more information.

1.4. Outage requirements

  • The Identity Service will need to be restarted to add the AD DS back end.
  • The Compute services on all nodes will need to be restarted in order to switch over to keystone v3.
  • Users will be unable to access the dashboard until their accounts have been created in AD DS. To reduce downtime, consider pre-staging the AD DS accounts well in advance of this change.

1.5. Firewall configuration

If firewalls are filtering traffic between AD DS and OpenStack, you will need to allow access through the following port:

SourceDestinationTypePort

OpenStack Controller Node

Active Directory Domain Controller

LDAPS

TCP 636

1.6. Configure Active Directory Domain Services

This section describes the tasks that Active Directory administrators will need to complete:

Table 1.1. Configuration steps

Task

Details

Create a service account.

This can be named according to your naming convention for service accounts, for example: svc-ldap. This can be a regular domain user account. Administrator privileges are not required.

Create a user group.

If a user needs access to OpenStack, they must be a member of this group. This can be named according to your naming convention for user groups, for example: grp-openstack. Members of this group can be granted access to Projects in the dashboard, if they are also members of the Project groups.

Create the Project groups.

Each OpenStack Project will require a corresponding AD group. For example, grp-openstack-demo and grp-openstack-admin .

Configure the service account.

The service account svc-ldap must be a member of the grp-openstack group.

Export the LDAPS public key.

Export the public key (not the private key) in the following format: DER-encoded x509 .cer file.

Send the key to the OpenStack administrators.

The OpenStack administrators will use this key to encrypt LDAPS communications between OpenStack and Active Directory.

Retrieve the NetBIOS name of your AD DS domain.

The OpenStack administrators will use this name for the Keystone domain, allowing consistent domain naming between the environments.

For example, the procedure below shows the PowerShell commands that would be run on the Active Directory Domain Controller:

1. Create the LDAP lookup account. This account is used by Identity Service to query the AD DS LDAP service:

PS C:\> New-ADUser -SamAccountName svc-ldap -Name "svc-ldap" -GivenName LDAP -Surname Lookups -UserPrincipalName svc-ldap@lab.local  -Enabled $false -PasswordNeverExpires $true -Path 'OU=labUsers,DC=lab,DC=local'

2. Set a password for this account, and then enable it. You will be prompted to specify a password that complies with your AD domain’s complexity requirements:

PS C:\> Set-ADAccountPassword svc-ldap -PassThru | Enable-ADAccount

3. Create a group for OpenStack users, called grp-openstack.

PS C:\> NEW-ADGroup -name "grp-openstack" -groupscope Global -path "OU=labUsers,DC=lab,DC=local"

4. Create the Project groups:

PS C:\> NEW-ADGroup -name "grp-openstack-demo" -groupscope Global -path "OU=labUsers,DC=lab,DC=local"
PS C:\> NEW-ADGroup -name "grp-openstack-admin" -groupscope Global -path "OU=labUsers,DC=lab,DC=local"

5. Add the svc-ldap user to the grp-openstack group:

PS C:\> ADD-ADGroupMember "grp-openstack" -members "svc-ldap"

6. From an AD Domain Controller, use a Certificates MMC to export your LDAPS certificate’s public key (not the private key) as a DER-encoded x509 .cer file. Send this file to the OpenStack administrators.

7. Retrieve the NetBIOS name of your AD DS domain.

PS C:\> Get-ADDomain | select NetBIOSName
NetBIOSName
-----------
LAB

Send this value to the OpenStack administrators.

1.7. Configure the LDAPS certificate

Note

When using multiple domains for LDAP authentication, you might receive various errors, such as Unable to retrieve authorized projects, or Peer's Certificate issuer is not recognized. This can arise if keystone uses the incorrect certificate for a certain domain. As a workaround, merge all of the LDAPS public keys into a single .crt bundle, and configure all of your keystone domains to use this file.

1. Copy the LDAPS public key to the node running OpenStack Identity (keystone), and convert the .cer to .pem. This example uses a certificate file named addc.lab.local.cer:

# openssl x509 -inform der -in addc.lab.local.cer -out addc.lab.local.pem

2. Install the .pem on your OpenStack controller. For example, in Red Hat Enterprise Linux:

# cp addc.lab.local.pem /etc/pki/ca-trust/source/anchors/
# update-ca-trust

3. Convert the .pem to .crt and copy to the certificate directory:

# openssl x509 -outform der -in addc.lab.local.pem -out addc.lab.local.crt
# cp addc.lab.local.crt /etc/ssl/certs/

1.8. Configure Identity Service

These steps prepare Identity Service for integration with AD DS.

1.8.1. Enable command line access to keystone v3

To manage Identity Service domains from the command line, you need to enable access to keystone v3.

Perform this procedure from the controller running the keystone service.

1. Create a copy of the existing environment variable file. In a director-based deployment, it will be called overcloudrc:

$ cp overcloudrc overcloudrc-v3

2. Edit the new overcloudrc-v3 file:

  • Change OS_AUTH_URL from v2.0 to v3. For example:
export OS_AUTH_URL=https://controllerIP:5000/v3/
  • Add the following entries to the bottom of overcloudrc-v3:
export OS_IDENTITY_API_VERSION=3
export OS_PROJECT_DOMAIN_NAME=Default
export OS_USER_DOMAIN_NAME=Default

3. Enable these options for your current command line session by sourcing the file:

$ source overcloudrc-v3

1.8.2. Configure the controller

Perform this procedure from the controller running the keystone service. If running a HA environment with multiple controllers, then these steps must be performed on each controller:

1. Configure SELinux:

# setsebool -P authlogin_nsswitch_use_ldap=on

The output might include messages similar to this. They can be ignored:

Full path required for exclude: net:[4026532245].

2. Create the domains directory:

# mkdir /etc/keystone/domains/
# chown keystone /etc/keystone/domains/

3. Configure Identity Service to use multiple back ends:

Note

You might need to install crudini using yum install crudini.

# crudini --set /etc/keystone/keystone.conf identity domain_specific_drivers_enabled true
# crudini --set /etc/keystone/keystone.conf identity domain_config_dir /etc/keystone/domains
# crudini --set /etc/keystone/keystone.conf assignment driver sql
Note

If you are using Red Hat OpenStack Platform director, then you will need to be aware that /etc/keystone/keystone.conf is managed by Puppet. Consequently, any custom configuration you add might be overwritten whenever you run the openstack overcloud deploy process. As a result, you might need to re-add this configuration manually each time. It is expected that a future release of director will include the Puppet parameters that will allow you to re-apply these settings automatically using a post-deployment script.

4. Enable multiple domains in dashboard. Add these lines to /etc/openstack-dashboard/local_settings:

OPENSTACK_API_VERSIONS = {
    "identity": 3
}
OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = True
OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = 'Default'
Note

If you are using Red Hat OpenStack Platform director, then you will need to be aware that /etc/openstack-dashboard/local_settings is managed by Puppet. Consequently, any custom configuration you add might be overwritten whenever you run the openstack overcloud deploy process. As a result, you might need to re-add this configuration manually each time. It is expected that a future release of director will include the Puppet parameters that will allow you to re-apply these settings automatically using a post-deployment script.

Restart the httpd service to apply the settings:

# systemctl restart httpd.service

5. Configure an additional back end:

In this example, LAB is the NetBIOS name to use as the Identity Service domain.

a. Create the keystone domain for AD DS integration.

Use the NetBIOS name value retrieved previously as the domain name. This approach allows you to present a consistent domain name to users during the login process. For example, if the NetBIOS name is LAB:

# openstack domain create LAB
Note

If this command is not available, check that you have enabled keystone v3 for your command line session by running # source overcloudrc-v3.

b. Create the configuration file:

To add the AD DS back end, enter the LDAP settings in a new file called /etc/keystone/domains/keystone.LAB.conf (where LAB is the NetBIOS name retrieved previously). You will need to edit the sample settings below to suit your AD DS deployment:

[ldap]
url                  = ldaps://addc.lab.local:636
user                  = CN=svc-ldap,OU=labUsers,DC=lab,DC=local
password                 = RedactedComplexPassword
suffix                   = DC=lab,DC=local
user_tree_dn             = OU=labUsers,DC=lab,DC=local
user_objectclass         = person
user_filter                  = (|(memberOf=cn=grp-openstack,OU=labUsers,DC=lab,DC=local)(memberOf=cn=grp-openstack-admin,OU=labUsers,DC=lab,DC=local)(memberOf=memberOf=cn=grp-openstack-demo,OU=labUsers,DC=lab,DC=local))
user_id_attribute        = sAMAccountName
user_name_attribute      = sAMAccountName
user_mail_attribute      = mail
user_pass_attribute      =
user_enabled_attribute   = userAccountControl
user_enabled_mask        = 2
user_enabled_default     = 512
user_attribute_ignore    = password,tenant_id,tenants
user_allow_create        = False
user_allow_update        = False
user_allow_delete        = False
group_objectclass        = group
group_tree_dn            = OU=labUsers,DC=lab,DC=local
group_filter             = (CN=grp-openstack*)
group_id_attribute       = cn
group_name_attribute     = name
group_allow_create       = False
group_allow_update       = False
group_allow_delete       = False
use_tls                  = False
tls_cacertfile                  = /etc/ssl/certs/addc.lab.local.crt
query_scope                  = sub
chase_referrals                  = false

[identity]
driver = keystone.identity.backends.ldap.Identity

Explanation of each setting:

SettingDescription

url

The AD Domain Controller to use for authentication. Uses LDAPS port 636.

user

The Distinguished Name of an AD account to use for LDAP queries. For example, you can locate the Distinguished Name value of the svc-ldap account in AD using Get-ADuser svc-ldap | select DistinguishedName

password

The plaintext password of the AD account used above.

suffix

The Distinguished Name of your AD domain. You can locate this value using Get-ADDomain | select DistinguishedName

user_tree_dn

The Organizational Unit (OU) that contains the OpenStack accounts.

user_objectclass

Defines the type of LDAP user. For AD, use the person type.

user_filter

Filters the users presented to Identity Service. As a result, only members of the grp-openstack group can have permissions defined in Identity Service. This value requires the full Distinguished Name of the group: Get-ADGroup grp-openstack | select DistinguishedName

user_id_attribute

Maps the AD value to use for user IDs.

user_name_attribute

Maps the AD value to use for names.

user_mail_attribute

Maps the AD value to use for user email addresses.

user_pass_attribute

Leave this value blank.

user_enabled_attribute

The AD setting that validates whether the account is enabled.

user_enabled_mask

Defines the value to check to determine whether an account is enabled. Used when booleans are not returned.

user_enabled_default

The AD value that indicates that an account is enabled.

user_attribute_ignore

Defines user attributes that Identity Service should disregard.

user_allow_create

Set this value to False, as keystone only requires read-only access.

user_allow_update

Set this value to False, as keystone only requires read-only access.

user_allow_delete

Set this value to False, as keystone only requires read-only access.

group_objectclass

Maps the AD value to use for groups.

group_tree_dn

The Organizational Unit (OU) that contains the user groups.

group_filter

Filters the groups presented to Identity Service.

group_id_attribute

Maps the AD value to use for group IDs.

group_name_attribute

Maps the AD value to use for group names.

group_allow_create

Set this value to False, as keystone only requires read-only access.

group_allow_update

Set this value to False, as keystone only requires read-only access.

group_allow_delete

Set this value to False, as keystone only requires read-only access.

use_tls

Defines whether TLS is to be used. This needs to be disabled if you are encrypting with LDAPS rather than STARTTLS.

tls_cacertfile

Specifies the path to the .crt certificate file.

query_scope

Configures Identity Service to also search within nested child OUs, when locating users that are members of the grp-openstack group.

chase_referrals

Set to false, this setting prevents python-ldap from chasing all referrals with anonymous access.

6. Change ownership of the configuration file to the keystone user:

# chown keystone /etc/keystone/domains/keystone.LAB.conf

7. Restart the httpd service to apply the changes:

# systemctl restart httpd.service

8. Grant the admin user access to the domain:

Note

This does not grant the OpenStack admin account any permissions on the actual AD DS domain. In this case, the term domain refers to OpenStack’s usage of the keystone domain.

a. Get the ID of the LAB domain:

# openstack domain show LAB
+---------+----------------------------------+
| Field   | Value                            |
+---------+----------------------------------+
| enabled | True                             |
| id      | 6800b0496429431ab1c4efbb3fe810d4 |
| name    | LAB                              |
+---------+----------------------------------+

b. Get the ID value of the admin user:

# openstack user list --domain default | grep admin
| 3d75388d351846c6a880e53b2508172a | admin      |

c. Get the ID value of the admin role:

# openstack role list
+----------------------------------+---------------+
| ID                               | Name          |
+----------------------------------+---------------+
| 544d48aaffde48f1b3c31a52c35f01f9 | SwiftOperator |
| 6d005d783bf0436e882c55c62457d33d | ResellerAdmin |
| 785c70b150ee4c778fe4de088070b4cf | admin         |
| 9fe2ff9ee4384b1894a90878d3e92bab | _member_      |
+----------------------------------+---------------+

d. Use the returned domain and admin IDs to construct the command that adds the admin user to the admin role of the keystone LAB domain:

# openstack role add --domain 6800b0496429431ab1c4efbb3fe810d4 --user 3d75388d351846c6a880e53b2508172a 785c70b150ee4c778fe4de088070b4cf

9. View the list of users in the AD DS domain by adding the NetBIOS name to the command:

Note

It might take some time for the LDAP to become queryable after a reboot or service restart.

# openstack user list --domain LAB

10. View the service accounts in the local Identity Service database:

# openstack user list --domain default

1.8.3. Configure Compute to use keystone v3

Compute uses keystone v2.0 by default, and so needs to be configured to use keystone v3 in order to use multi-domain capabilities.

1. On each Compute node, and the controller, adjust the keystone_authtoken value:

# crudini --set /etc/nova/nova.conf keystone_authtoken auth_version v3

2. Restart these services on the controller to apply the changes:

# systemctl restart openstack-nova-api.service openstack-nova-cert.service openstack-nova-conductor.service openstack-nova-consoleauth.service openstack-nova-novncproxy.service openstack-nova-scheduler.service

3. Restart this service on each Compute node to apply the changes:

# systemctl restart openstack-nova-compute.service

1.8.4. Configure Block Storage to use keystone v3

You must also configure Block Storage (cinder) to authenticate to keystone v3.

  1. In /etc/cinder/cinder.conf:

    [keystone_authtoken]
    auth_uri = https://controllerIP:5000/v3
    auth_version = v3
    • auth_uri - replace controllerIP with the IP address of the controller. If your deployment has more than one controller, you should use the keystone endpoint VIP instead of the controller IP.
  2. Restart the cinder services:

    # systemctl restart openstack-cinder-api.service
    # systemctl restart openstack-cinder-backup.service
    # systemctl restart openstack-cinder-scheduler.service
    # systemctl restart openstack-cinder-volume.service

1.8.5. Allow Active Directory group members to access Projects

To allow authenticated users access to OpenStack resources, the recommended method is to authorize certain Active Directory groups to grant access to Projects. This saves the OpenStack administrators from having to allocate each user to a role in a Project. Instead, the Active Directory groups are granted roles in Projects. As a result, Active Directory users that are members of these Active Directory groups will be able to access pre-determined Projects.

Note

If you would prefer to manually manage the authorization of individual Active Directory users, see the following section: Allow individual Active Directory users to access Projects

This section presumes that the Active Directory administrator has already completed these steps:

  • Create a group named grp-openstack-admin in Active Directory.
  • Create a group named grp-openstack-demo in Active Directory.
  • Add your Active Directory users to one of the above groups, as needed.
  • Add your Active Directory users to the grp-openstack group.

These steps assign a role to an AD group. Group members will then have permission to access OpenStack resources.

1. Retrieve a list of AD groups:

# openstack group list --domain LAB
+------------------------------------------------------------------+---------------------+
| ID                                                               | Name                |
+------------------------------------------------------------------+---------------------+
| 185277be62ae17e498a69f98a59b66934fb1d6b7f745f14f5f68953a665b8851 | grp-openstack       |
| a8d17f19f464c4548c18b97e4aa331820f9d3be52654aa8094e698a9182cbb88 | grp-openstack-admin |
| d971bb3bd5e64a454cbd0cc7af4c0773e78d61b5f81321809f8323216938cae8 | grp-openstack-demo  |
+------------------------------------------------------------------+---------------------+

2. Retrieve a list of roles:

# openstack role list
+----------------------------------+---------------+
| ID                               | Name          |
+----------------------------------+---------------+
| 0969957bce5e4f678ca6cef00e1abf8a | ResellerAdmin |
| 1fcb3c9b50aa46ee8196aaaecc2b76b7 | admin         |
| 9fe2ff9ee4384b1894a90878d3e92bab | _member_      |
| d3570730eb4b4780a7fed97eba197e1b | SwiftOperator |
+----------------------------------+---------------+

3. Grant the Active Directory groups access to Projects by adding them to one or more of these roles. For example, if you want users in the grp-openstack-demo group to be general users of the demo project, you must add the group to the member role:

# openstack role add --project demo --group d971bb3bd5e64a454cbd0cc7af4c0773e78d61b5f81321809f8323216938cae8  _member_

As a result, members of grp-openstack-demo are able to log in to the dashboard by entering their AD DS username and password, when also entering LAB in the Domain field:

domain
Note

If users receive the error "Error: Unable to retrieve container list.", and expect to be able to manage containers, then they must be added to the SwiftOperator role.

1.8.6. Allow Active Directory users to access Projects

AD DS users that are members of the grp-openstack AD group can be granted permission to log in to a Project in the dashboard:

1. Retrieve a list of AD users:

# openstack user list --domain LAB
 +------------------------------------------------------------------+----------------+
| ID                                                               | Name           |
+------------------------------------------------------------------+----------------+
| 1f24ec1f11aeb90520079c29f70afa060d22e2ce92b2eba7784c841ac418091e | user1          |
| 12c062faddc5f8b065434d9ff6fce03eb9259537c93b411224588686e9a38bf1 | user2          |
| afaf48031eb54c3e44e4cb0353f5b612084033ff70f63c22873d181fdae2e73c | user3          |
| e47fc21dcf0d9716d2663766023e2d8dc15a6d9b01453854a898cabb2396826e | user4          |
+------------------------------------------------------------------+----------------+

2. Retrieve a list of roles:

# openstack role list
+----------------------------------+---------------+
| ID                               | Name          |
+----------------------------------+---------------+
| 544d48aaffde48f1b3c31a52c35f01f9 | SwiftOperator |
| 6d005d783bf0436e882c55c62457d33d | ResellerAdmin |
| 785c70b150ee4c778fe4de088070b4cf | admin         |
| 9fe2ff9ee4384b1894a90878d3e92bab | _member_      |
+----------------------------------+---------------+

3. Grant users access to Projects by adding them to one or more of these roles. For example, if you want user1 to be a general user of the demo project, you add them to the member role:

# openstack role add --project demo --user 1f24ec1f11aeb90520079c29f70afa060d22e2ce92b2eba7784c841ac418091e _member_

Or, if you want user1 to be an administrative user of the demo project, you add them to the admin role:

# openstack role add --project demo --user 1f24ec1f11aeb90520079c29f70afa060d22e2ce92b2eba7784c841ac418091e admin

As a result, user1 is able to log in to the dashboard by entering their AD DS username and password, when also entering LAB in the Domain field:

domain
Note

If users receive the error "Error: Unable to retrieve container list.", and expect to be able to manage containers, then they must be added to the SwiftOperator role.

1.9. Grant access to the Domain tab

To allow the admin user to see the Domain tab, you will need to assign it the admin role in the default domain:

  1. Find the admin user’s UUID:

    $ openstack user list | grep admin
    | a6a8adb6356f4a879f079485dad1321b | admin      |
  2. Add the admin role in the default domain to the admin user:

    $ openstack role add --domain default --user a6a8adb6356f4a879f079485dad1321b admin

    As a result, the admin user can now see the Domain tab.

1.10. Creating a new project

After you have completed these integration steps, when you create a new project you will need to decide whether to create it in the Default domain, or in the keystone domain you’ve just created. This decision can be reached by considering your workflow, and how you administer user accounts. The Default domain can be be thought of as an internal domain, used to manage service accounts and the admin project. For separation purposes, you might want to keep your AD-backed users in a separate keystone domain.

1.11. Changes to the dashboard log in process

Configuring multiple domains in Identity Service enables a new Domain field in the dashboard login page.
Users are expected to enter the domain that matches their login credentials. This field must be manually filled with one of the domains present in keystone. Use the openstack command to list the available entries.

In this example, AD DS accounts will need to specify the LAB domain. The built-in keystone accounts, such as admin, must specify Default as their domain:

# openstack domain list
+----------------------------------+---------+---------+----------------------------------------------------------------------+
| ID                               | Name    | Enabled | Description                                                          |
+----------------------------------+---------+---------+----------------------------------------------------------------------+
| 6800b0496429431ab1c4efbb3fe810d4 | LAB     | True    |                                                                      |
| default                          | Default | True    | Owns users and tenants (i.e. projects) available on Identity API v2. |
+----------------------------------+---------+---------+----------------------------------------------------------------------+

1.12. Changes to the command line

For certain commands, you might need to specify the applicable domain. For example, appending --domain LAB in this command returns users in the LAB domain (that are members of the grp-openstack group):

# openstack user list --domain LAB

Appending --domain Default returns the built-in keystone accounts:

# openstack user list --domain Default

1.13. Test AD DS integration

This procedure validates AD DS integration by testing user access to dashboard features:

1. Create a test user in AD, and add the user to the grp-openstack AD DS group.

2. Add the user to the _member_ role of the demo tenant.

3. Log in to the dashboard using the credentials of the AD test user.

4. Click on each of the tabs to confirm that they are presented successfully without error messages.

5. Use the dashboard to build a test instance.

Note

If you experience issues with these steps, perform steps 3-5 with the built-in admin account. If successful, this demonstrates that OpenStack is still working as expected, and that an issue exists somewhere within the AD ←→ Identity integration settings. See Section 1.16, “Troubleshooting”.

1.14. Configure for high availability

With keystone v3 enabled, you can make this configuration highly available by listing multiple AD Domain Controllers in the configuration file for that domain.

1. Add a second server to the url entry. For example, updating the url setting in the keystone.LAB.conf file will have Identity Service send all query traffic to the first Domain Controller in the list, addc.lab.local:

url =  ldaps://addc.lab.local,ldaps://addc2.lab.local

If a query to addc.lab.local fails due to it being unavailable, Identity Service will attempt to query the next server in the list: addc2.lab.local. Note that this configuration does not perform queries in a round-robin fashion, so cannot be considered a load-balancing solution.

2. Set the network timeout in /etc/openldap/ldap.conf:

NETWORK_TIMEOUT 2

In addition, if you have firewalls configured between the controller and the domain controllers, then you should not configure the domain controllers to silently drop packets from the controller. This will allow python-keystoneclient to properly detect outages and redirect the request to the next domain controller in the list.

Note

There might be connection delays while queries are being redirected to the second LDAP server in the list. This is because the connection to the first server must first time out before the second is attempted.

1.15. Create a RC file for a non-admin user

You might need to create a RC file for a non-admin user. For example:

$ cat overcloudrc-v3-user1
# Clear any old environment that may conflict.
for key in $( set | awk '{FS="="}  /^OS_/ {print $1}' ); do unset $key ; done
export OS_USERNAME=user1
export NOVA_VERSION=1.1
export OS_PROJECT_NAME=demo
export OS_PASSWORD=RedactedComplexPassword
export OS_NO_CACHE=True
export COMPUTE_API_VERSION=1.1
export no_proxy=,10.0.0.5,192.168.2.11
export OS_CLOUDNAME=overcloud
export OS_AUTH_URL=https://10.0.0.5:5000/v3
export OS_AUTH_TYPE=password
export PYTHONWARNINGS="ignore:Certificate has no, ignore:A true
SSLContext object is not available"
export OS_IDENTITY_API_VERSION=3
export OS_PROJECT_DOMAIN_NAME=Default
export OS_USER_DOMAIN_NAME=LAB

1.16. Troubleshooting

1.16.1. Test LDAP connections

Use ldapsearch to remotely perform test queries against the Active Directory Domain Controller. A successful result here indicates that network connectivity is working, and the AD DS services are up. In this example, a test query is performed against the server addc.lab.local on port 636:

# ldapsearch -Z -x -H ldaps://addc.lab.local:636 -D "svc-ldap@lab.local" -W -b "OU=labUsers,DC=lab,DC=local" -s sub "(cn=*)" cn
Note

ldapsearch is a part of the openldap-clients package. You can install this using # yum install openldap-clients

1.16.2. Test the Certificate Trust Configuration

If you receive the error Peer's Certificate issuer is not recognized. while testing with ldapsearch, confirm that your TLS_CACERTDIR path is correctly set. For example:

  • /etc/openldap/ldap.conf
TLS_CACERTDIR /etc/openldap/certs
Note

As a temporary workaround, you may want to consider disabling certificate validation.

This setting must not be permanently configured:

  • /etc/openldap/ldap.conf
TLS_REQCERT allow

If the ldapsearch query works after setting this value, you might need to review whether your certificate trusts are correctly configured.

1.16.3. Test port access

Use nc to check that LDAPS port 636 is remotely accessible. In this example, a probe is performed against the server addc.lab.local. Press ctrl-c to exit the prompt.

# nc -v addc.lab.local 636
Ncat: Version 6.40 ( http://nmap.org/ncat )
Ncat: Connected to 192.168.200.10:636.
^C

Failure to establish a connection could indicate a firewall configuration issue.

Red Hat logoGithubRedditYoutubeTwitter

学习

尝试、购买和销售

社区

关于红帽文档

通过我们的产品和服务,以及可以信赖的内容,帮助红帽用户创新并实现他们的目标。

让开源更具包容性

红帽致力于替换我们的代码、文档和 Web 属性中存在问题的语言。欲了解更多详情,请参阅红帽博客.

關於紅帽

我们提供强化的解决方案,使企业能够更轻松地跨平台和环境(从核心数据中心到网络边缘)工作。

© 2024 Red Hat, Inc.