Chapter 82. tripleo

--deployment-user DEPLOYMENT_USER

User who executes the tripleo config generate command. Defaults to stack.

--output-dir OUTPUT_DIR

Directory to output ansible.cfg and ansible.log files.

-h, --help

Show this help message and exit

--output-env-file <file path>

File to write environment file containing default ContainerImagePrepare value.

--local-push-destination

Include a push_destination to trigger upload to a local registry.

-h, --help

Show this help message and exit

--environment-file <file path>, -e <file path>

Environment file containing the containerimageprepare parameter which specifies all prepare actions. Also, environment files specifying which services are containerized. Entries will be filtered to only contain images used by containerized services. (Can be specified more than once.)

--environment-directory <HEAT ENVIRONMENT DIRECTORY>

Environment file directories that are automatically added to the environment. Can be specified more than once. Files in directories are loaded in ascending sort order.

--roles-file ROLES_FILE, -r ROLES_FILE

Roles file, overrides the default roles_data.yaml in the t-h-t templates directory used for deployment. May be an absolute path or the path relative to the templates dir.

--output-env-file <file path>

File to write heat environment file which specifies all image parameters. Any existing file will be overwritten.

--dry-run

Do not perform any pull, modify, or push operations. The environment file will still be populated as if these operations were performed.

--cleanup <full, partial, none>

Cleanup behavior for local images left after upload. The default full will attempt to delete all local images. partial will leave images required for deployment on this host. none will do no cleanup.

--templates [TEMPLATES]

The directory containing the heat templates to deploy

--standalone

Run deployment as a standalone deployment with no undercloud.

--upgrade

Upgrade an existing deployment.

-y, --yes

Skip yes/no prompt (assume yes).

--stack STACK

Name for the ephemeral (one-time create and forget) heat stack.

--output-dir OUTPUT_DIR

Directory to output state, processed heat templates, ansible deployment files.

--output-only

Do not execute the ansible playbooks. by default the playbooks are saved to the output-dir and then executed.

--standalone-role STANDALONE_ROLE

The role to use for standalone configuration when populating the deployment actions.

-t <TIMEOUT>, --timeout <TIMEOUT>

Deployment timeout in minutes.

-e <HEAT ENVIRONMENT FILE>, --environment-file <HEAT ENVIRONMENT FILE>

Environment files to be passed to the heat stack- create or heat stack-update command. (Can be specified more than once.)

--roles-file ROLES_FILE, -r ROLES_FILE

Roles file, overrides the default roles_data_undercloud.yaml in the t-h-t templates directory used for deployment. May be an absolute path or the path relative to the templates dir.

--networks-file NETWORKS_FILE, -n NETWORKS_FILE

Roles file, overrides the default /dev/null in the t-h-t templates directory used for deployment. May be an absolute path or the path relative to the templates dir.

--plan-environment-file PLAN_ENVIRONMENT_FILE, -p PLAN_ENVIRONMENT_FILE

Plan environment file, overrides the default plan- environment.yaml in the --templates directory

--heat-api-port <HEAT_API_PORT>

Heat api port to use for the installers private heat API instance. Optional. Default: 8006.)

--heat-user <HEAT_USER>

User to execute the non-privileged heat-all process. Defaults to heat.

--deployment-user DEPLOYMENT_USER

User who executes the tripleo deploy command. defaults to $SUDO_USER. If $SUDO_USER is unset it defaults to stack.

--deployment-python-interpreter DEPLOYMENT_PYTHON_INTERPRETER

The path to python interpreter to use for the deployment actions. If not specified the python version of the openstackclient will be used. This may need to be used if deploying on a python2 host from a python3 system or vice versa.

--heat-container-image <HEAT_CONTAINER_IMAGE>

The container image to use when launching the heat-all process. Defaults to: tripleomaster/centos-binary- heat-all:current-tripleo

--heat-native [HEAT_NATIVE]

Execute the heat-all process natively on this host. This option requires that the heat-all binaries be installed locally on this machine. This option is enabled by default which means heat-all is executed on the host OS directly.

--local-ip <LOCAL_IP>

Local ip/cidr for undercloud traffic. required.

--control-virtual-ip <CONTROL_VIRTUAL_IP>

Control plane vip. this allows the undercloud installer to configure a custom VIP on the control plane.

--public-virtual-ip <PUBLIC_VIRTUAL_IP>

Public nw vip. this allows the undercloud installer to configure a custom VIP on the public (external) NW.

--local-domain <LOCAL_DOMAIN>

Local domain for standalone cloud and its api endpoints

--cleanup

Cleanup temporary files. using this flag will remove the temporary files used during deployment in after the command is run.

--hieradata-override [HIERADATA_OVERRIDE]

Path to hieradata override file. when it points to a heat env file, it is passed in t-h-t via --environment-file. When the file contains legacy instack data, it is wrapped with <role>ExtraConfig and also passed in for t-h-t as a temp file created in --output-dir. Note, instack hiera data may be not t-h-t compatible and will highly likely require a manual revision.

--keep-running

Keep the ephemeral heat running after the stack operation is complete. This is for debugging purposes only. The ephemeral Heat can be used by openstackclient with: OS_AUTH_TYPE=none OS_ENDPOINT=http://127.0.0.1:8006/v1/admin openstack stack list where 8006 is the port specified by --heat- api-port.

--inflight-validations

Activate in-flight validations during the deploy. in- flight validations provide a robust way to ensure deployed services are running right after their activation. Defaults to False.

--force-stack-update

Do a virtual update of the ephemeral heat stack (it cannot take real updates). New or failed deployments always have the stack_action=CREATE. This option enforces stack_action=UPDATE.

--force-stack-create

Do a virtual create of the ephemeral heat stack. new or failed deployments always have the stack_action=CREATE. This option enforces stack_action=CREATE.

--templates [TEMPLATES]

The directory containing the heat templates to deploy

--standalone

Run deployment as a standalone deployment with no undercloud.

--upgrade

Upgrade an existing deployment.

-y, --yes

Skip yes/no prompt (assume yes).

--stack STACK

Name for the ephemeral (one-time create and forget) heat stack.

--output-dir OUTPUT_DIR

Directory to output state, processed heat templates, ansible deployment files.

--output-only

Do not execute the ansible playbooks. by default the playbooks are saved to the output-dir and then executed.

--standalone-role STANDALONE_ROLE

The role to use for standalone configuration when populating the deployment actions.

-t <TIMEOUT>, --timeout <TIMEOUT>

Deployment timeout in minutes.

-e <HEAT ENVIRONMENT FILE>, --environment-file <HEAT ENVIRONMENT FILE>

Environment files to be passed to the heat stack- create or heat stack-update command. (Can be specified more than once.)

--roles-file ROLES_FILE, -r ROLES_FILE

Roles file, overrides the default roles_data_undercloud.yaml in the t-h-t templates directory used for deployment. May be an absolute path or the path relative to the templates dir.

--networks-file NETWORKS_FILE, -n NETWORKS_FILE

Roles file, overrides the default /dev/null in the t-h-t templates directory used for deployment. May be an absolute path or the path relative to the templates dir.

--plan-environment-file PLAN_ENVIRONMENT_FILE, -p PLAN_ENVIRONMENT_FILE

Plan environment file, overrides the default plan- environment.yaml in the --templates directory

--heat-api-port <HEAT_API_PORT>

Heat api port to use for the installers private heat API instance. Optional. Default: 8006.)

--heat-user <HEAT_USER>

User to execute the non-privileged heat-all process. Defaults to heat.

--deployment-user DEPLOYMENT_USER

User who executes the tripleo deploy command. defaults to $SUDO_USER. If $SUDO_USER is unset it defaults to stack.

--deployment-python-interpreter DEPLOYMENT_PYTHON_INTERPRETER

The path to python interpreter to use for the deployment actions. If not specified the python version of the openstackclient will be used. This may need to be used if deploying on a python2 host from a python3 system or vice versa.

--heat-container-image <HEAT_CONTAINER_IMAGE>

The container image to use when launching the heat-all process. Defaults to: tripleomaster/centos-binary- heat-all:current-tripleo

--heat-native [HEAT_NATIVE]

Execute the heat-all process natively on this host. This option requires that the heat-all binaries be installed locally on this machine. This option is enabled by default which means heat-all is executed on the host OS directly.

--local-ip <LOCAL_IP>

Local ip/cidr for undercloud traffic. required.

--control-virtual-ip <CONTROL_VIRTUAL_IP>

Control plane vip. this allows the undercloud installer to configure a custom VIP on the control plane.

--public-virtual-ip <PUBLIC_VIRTUAL_IP>

Public nw vip. this allows the undercloud installer to configure a custom VIP on the public (external) NW.

--local-domain <LOCAL_DOMAIN>

Local domain for standalone cloud and its api endpoints

--cleanup

Cleanup temporary files. using this flag will remove the temporary files used during deployment in after the command is run.

--hieradata-override [HIERADATA_OVERRIDE]

Path to hieradata override file. when it points to a heat env file, it is passed in t-h-t via --environment-file. When the file contains legacy instack data, it is wrapped with <role>ExtraConfig and also passed in for t-h-t as a temp file created in --output-dir. Note, instack hiera data may be not t-h-t compatible and will highly likely require a manual revision.

--keep-running

Keep the ephemeral heat running after the stack operation is complete. This is for debugging purposes only. The ephemeral Heat can be used by openstackclient with: OS_AUTH_TYPE=none OS_ENDPOINT=http://127.0.0.1:8006/v1/admin openstack stack list where 8006 is the port specified by --heat- api-port.

--inflight-validations

Activate in-flight validations during the deploy. in- flight validations provide a robust way to ensure deployed services are running right after their activation. Defaults to False.

--force-stack-update

Do a virtual update of the ephemeral heat stack (it cannot take real updates). New or failed deployments always have the stack_action=CREATE. This option enforces stack_action=UPDATE.

--force-stack-create

Do a virtual create of the ephemeral heat stack. new or failed deployments always have the stack_action=CREATE. This option enforces stack_action=CREATE.

-h, --help

Show this help message and exit

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

-h, --help

Show this help message and exit

--group <group>[,<group>,…​]

List specific group validations, if more than one group is required separate the group names with commas: --group pre-upgrade,prep

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--plan PLAN, --stack PLAN

Execute the validations using a custom plan name (default: overcloud)

--workers N, -w N

The maximum number of threads that can be used to execute the given validations (default: 1)

--extra-vars EXTRA_VARS

Add a dictionary as extra variable to a validation: --extra-vars {"min_undercloud_ram_gb": 24} (default: {})

--extra-vars-file EXTRA_VARS_FILE

Add a json/yaml file containing extra variable to a validation: --extra-vars-file /home/stack/vars.[json

yaml] If using Mistral, only a valid JSON file will be supported. (default: )

--validation <validation_id>[,<validation_id>,…​]

Run specific validations, if more than one validation is required separate the names with commas: --validation check-ftype,512e

--validation 512e (default: [])

--group <group>[,<group>,…​]

Run specific group validations, if more than one group is required separate the group names with commas: --group pre-upgrade,prep

-h, --help

Show this help message and exit

--validation <validation_id>[,<validation_id>,…​]

List specific validations, if more than one validation is required separate the names with commas: --validation check-ftype,512e

--validation 512e (default: [])

--group <group_id>[,<group_id>,…​]

List specific group validations, if more than one group is required separate the group names with commas: pre-upgrade,prep

openshift-on-openstack (default: [])

--download [json

yaml] /tmp/myvars

Create a json or a yaml file containing all the variables available for the validations: [yaml

json] /tmp/myvars (default: [])

-f <format>, --format <format>

Print representation of the validation. the choices of the output format is json,yaml. (default: json)

<validation>

Validation id

-h, --help

Show this help message and exit

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.