6.4. 令牌操作和策略处理

#specify that we want authentication for format. We almost always want this at true:
op.format.userKey.auth.enable=true
#specify the ldap authentication configuration, so TPS knows where to validate credentials:
op.format.userKey.auth.id=ldap1
#specify the connection the the CA
op.format.userKey.ca.conn=ca1
#specify id of the card manager applet on given token
op.format.userKey.cardmgr_instance=A0000000030000

#specify if we need to match the visa cuid to the nist sp800sp derivation algorithm KDD value. Mostly will be false:
op.format.userKey.cuidMustMatchKDD=false

#enable ability to restrict key changoever to a specific range of key set:
op.format.userKey.enableBoundedGPKeyVersion=true
#enable the phone home url to write to the token:
op.format.userKey.issuerinfo.enable=true
#actual home url to write to token:
op.format.userKey.issuerinfo.value=http://server.example.com:8080/tps/phoneHome
#specify whether to request a login from the client. Mostly true, external reg may want this to be false:
op.format.userKey.loginRequest.enable=true
#Actual range of desired keyset numbers:
op.format.userKey.maximumGPKeyVersion=FF
op.format.userKey.minimumGPKeyVersion=01
#Whether or not to revoke certs on the token after a format, and what the reason will be if so:
op.format.userKey.revokeCert=true
op.format.userKey.revokeCert.reason=0
#This will roll back the reflected keyyset version of the token in the tokendb. After a failed key changeover operation. This is to keep the value in sync with reality in the tokendb. Always false, since this version of TPS avoids this situation now:
op.format.userKey.rollbackKeyVersionOnPutKeyFailure=false

#specify connection to the TKS:
op.format.userKey.tks.conn=tks1
#where to get the actual applet file to write to the token:
op.format.userKey.update.applet.directory=/usr/share/pki/tps/applets
#Allows a completely blank token to be recognized by TPS. Mostly should be true:
op.format.userKey.update.applet.emptyToken.enable=true
#Always should be true, not supported:
op.format.userKey.update.applet.encryption=true
#Actual version of the applet file we want to upgrade to. This file will have a name something like: 1.4.54de7a99.ijc:
op.format.userKey.update.applet.requiredVersion=1.4.54de790f
#Symm key changeover:
op.format.userKey.update.symmetricKeys.enable=false
op.format.userKey.update.symmetricKeys.requiredVersion=1
#Make sure the token db is in sync with reality. Should always be true:
op.format.userKey.validateCardKeyInfoAgainstTokenDB=true

op.enroll.userKey.auth.enable=true
op.enroll.userKey.auth.id=ldap1
op.enroll.userKey.cardmgr_instance=A0000000030000
op.enroll.userKey.cuidMustMatchKDD=false

op.enroll.userKey.enableBoundedGPKeyVersion=true
op.enroll.userKey.issuerinfo.enable=true
op.enroll.userKey.issuerinfo.value=http://server.example.com:8080/tps/phoneHome

#configure the encryption cert and keys  we want on the token:

#connection the the CA, which issues the certs:
op.enroll.userKey.keyGen.encryption.ca.conn=ca1
#Profile id we want the CA to use to issue our encrytion cert:
op.enroll.userKey.keyGen.encryption.ca.profileId=caTokenUserEncryptionKeyEnrollment

#These two cover the indexes of the certs written to the token. Each cert needs a unique index or “slot”. In our sample the enc cert will occupy slot 2 and the signing cert, shown later, will occupy slot 1. Avoid overlap with these numbers:
op.enroll.userKey.keyGen.encryption.certAttrId=c2
op.enroll.userKey.keyGen.encryption.certId=C2

op.enroll.userKey.keyGen.encryption.cuid_label=$cuid$
#specify size of generated private key:
op.enroll.userKey.keyGen.encryption.keySize=1024
op.enroll.userKey.keyGen.encryption.keyUsage=0
op.enroll.userKey.keyGen.encryption.keyUser=0
#specify pattern for what the label of the cert will look like when the cert nickname is displayed in browsers and mail clients:
op.enroll.userKey.keyGen.encryption.label=encryption key for $userid$
#specify if we want to overwrite certs on a re-enrollment operation. This is almost always the case:
op.enroll.userKey.keyGen.encryption.overwrite=true

#The next several settings specify the capabilities that the private key on the final token will inherit. For instance this will determine if the cert can be used for encryption or digital signatures. There are settings for both the private and public key.

op.enroll.userKey.keyGen.encryption.private.keyCapabilities.decrypt=true
op.enroll.userKey.keyGen.encryption.private.keyCapabilities.derive=false
op.enroll.userKey.keyGen.encryption.private.keyCapabilities.encrypt=false
op.enroll.userKey.keyGen.encryption.private.keyCapabilities.private=true
op.enroll.userKey.keyGen.encryption.private.keyCapabilities.sensitive=true
op.enroll.userKey.keyGen.encryption.private.keyCapabilities.sign=false
op.enroll.userKey.keyGen.encryption.private.keyCapabilities.signRecover=false
op.enroll.userKey.keyGen.encryption.private.keyCapabilities.token=true
op.enroll.userKey.keyGen.encryption.private.keyCapabilities.unwrap=true
op.enroll.userKey.keyGen.encryption.private.keyCapabilities.verify=false
op.enroll.userKey.keyGen.encryption.private.keyCapabilities.verifyRecover=false
op.enroll.userKey.keyGen.encryption.private.keyCapabilities.wrap=false
op.enroll.userKey.keyGen.encryption.privateKeyAttrId=k4
op.enroll.userKey.keyGen.encryption.privateKeyNumber=4
op.enroll.userKey.keyGen.encryption.public.keyCapabilities.decrypt=false
op.enroll.userKey.keyGen.encryption.public.keyCapabilities.derive=false
op.enroll.userKey.keyGen.encryption.public.keyCapabilities.encrypt=true
op.enroll.userKey.keyGen.encryption.public.keyCapabilities.private=false
op.enroll.userKey.keyGen.encryption.public.keyCapabilities.sensitive=false
op.enroll.userKey.keyGen.encryption.public.keyCapabilities.sign=false
op.enroll.userKey.keyGen.encryption.public.keyCapabilities.signRecover=false
op.enroll.userKey.keyGen.encryption.public.keyCapabilities.token=true
op.enroll.userKey.keyGen.encryption.public.keyCapabilities.unwrap=false
op.enroll.userKey.keyGen.encryption.public.keyCapabilities.verify=false
op.enroll.userKey.keyGen.encryption.public.keyCapabilities.verifyRecover=false
op.enroll.userKey.keyGen.encryption.public.keyCapabilities.wrap=true

#The following index numbers correspond to the index or slot that the private and public keys occupy. The common formula we use is that the public key index will be 2 * cert id + 1, and the private key index, shown above will be 2 * cert id. In this example the cert id is 2, so the key ids will be 4 and 5 respectively. When composing these, be careful not to create conflicts. This applies to the signing key section below.

op.enroll.userKey.keyGen.encryption.publicKeyAttrId=k5
op.enroll.userKey.keyGen.encryption.publicKeyNumber=5

#specify if, when a certificate is slated for revocation, based on other rules, we want to check to see if some other token is using this cert in a shared situation. If this is set to true, and this situation is found the cert will not be revoked until the last token wants to revoke this cert:
op.enroll.userKey.keyGen.encryption.recovery.destroyed.holdRevocationUntilLastCredential=false

#specify, if we want server side keygen, if we want to have that generated key archived to the drm. This is almost always the case, since we want the ability to later recover a cert and its encryption private key back to a new token:
op.enroll.userKey.keyGen.encryption.serverKeygen.archive=true
#connection to drm to generate the key for us:
op.enroll.userKey.keyGen.encryption.serverKeygen.drm.conn=kra1
#specify server side keygen of the encryption private key. This most often will be desired:
op.enroll.userKey.keyGen.encryption.serverKeygen.enable=true

#This setting tells us how many certs we want to enroll for this TPS profile, in the case “userKey”. Here we want 2 total certs. The next values then go on to index into the config what two types of certs we want, signing and encryption:
op.enroll.userKey.keyGen.keyType.num=2
op.enroll.userKey.keyGen.keyType.value.0=signing
op.enroll.userKey.keyGen.keyType.value.1=encryption

#configure the signing cert and keys we want on the token the settings for these are similar to the encryption settings already discussed, except the capability flags presented below, since this is a signing key.

op.enroll.userKey.keyGen.signing.ca.conn=ca1
op.enroll.userKey.keyGen.signing.ca.profileId=caTokenUserSigningKeyEnrollment
op.enroll.userKey.keyGen.signing.certAttrId=c1
op.enroll.userKey.keyGen.signing.certId=C1
op.enroll.userKey.keyGen.signing.cuid_label=$cuid$
op.enroll.userKey.keyGen.signing.keySize=1024
op.enroll.userKey.keyGen.signing.keyUsage=0
op.enroll.userKey.keyGen.signing.keyUser=0
op.enroll.userKey.keyGen.signing.label=signing key for $userid$
op.enroll.userKey.keyGen.signing.overwrite=true
op.enroll.userKey.keyGen.signing.private.keyCapabilities.decrypt=false
op.enroll.userKey.keyGen.signing.private.keyCapabilities.derive=false
op.enroll.userKey.keyGen.signing.private.keyCapabilities.encrypt=false
op.enroll.userKey.keyGen.signing.private.keyCapabilities.private=true
op.enroll.userKey.keyGen.signing.private.keyCapabilities.sensitive=true
op.enroll.userKey.keyGen.signing.private.keyCapabilities.sign=true
op.enroll.userKey.keyGen.signing.private.keyCapabilities.signRecover=true
op.enroll.userKey.keyGen.signing.private.keyCapabilities.token=true
op.enroll.userKey.keyGen.signing.private.keyCapabilities.unwrap=false
op.enroll.userKey.keyGen.signing.private.keyCapabilities.verify=false
op.enroll.userKey.keyGen.signing.private.keyCapabilities.verifyRecover=false
op.enroll.userKey.keyGen.signing.private.keyCapabilities.wrap=false
op.enroll.userKey.keyGen.signing.privateKeyAttrId=k2
op.enroll.userKey.keyGen.signing.privateKeyNumber=2
op.enroll.userKey.keyGen.signing.public.keyCapabilities.decrypt=false
op.enroll.userKey.keyGen.signing.public.keyCapabilities.derive=false
op.enroll.userKey.keyGen.signing.public.keyCapabilities.encrypt=false
op.enroll.userKey.keyGen.signing.public.keyCapabilities.private=false
op.enroll.userKey.keyGen.signing.public.keyCapabilities.sensitive=false
op.enroll.userKey.keyGen.signing.public.keyCapabilities.sign=false
op.enroll.userKey.keyGen.signing.public.keyCapabilities.signRecover=false
op.enroll.userKey.keyGen.signing.public.keyCapabilities.token=true
op.enroll.userKey.keyGen.signing.public.keyCapabilities.unwrap=false
op.enroll.userKey.keyGen.signing.public.keyCapabilities.verify=true
op.enroll.userKey.keyGen.signing.public.keyCapabilities.verifyRecover=true
op.enroll.userKey.keyGen.signing.public.keyCapabilities.wrap=false
op.enroll.userKey.keyGen.signing.publicKeyAttrId=k3
op.enroll.userKey.keyGen.signing.publicKeyNumber=3

#When a token is marked destroyed, don’t revoke the certs on the token unless all other tokens do not have the certs included:
op.enroll.userKey.keyGen.encryption.recovery.destroyed.holdRevocationUntilLastCredential=false
#specify if we even want to revoke certs a token is marked destroyed:
op.enroll.userKey.keyGen.encryption.recovery.destroyed.revokeCert=false
#if we want to revoke any certs here, specify the reason for revocation that will be sent to the CA:
op.enroll.userKey.keyGen.encryption.recovery.destroyed.revokeCert.reason=0
#speficy if we want to revoke expired certs when marking the token destroyed:
op.enroll.userKey.keyGen.encryption.recovery.destroyed.revokeExpiredCerts=false

op.enroll.userKey.keyGen.encryption.recovery.destroyed.scheme=RecoverLast

op.enroll.userKey.keyGen.encryption.recovery.keyCompromise.holdRevocationUntilLastCredential=false
op.enroll.userKey.keyGen.encryption.recovery.keyCompromise.revokeCert=true
op.enroll.userKey.keyGen.encryption.recovery.keyCompromise.revokeCert.reason=1
op.enroll.userKey.keyGen.encryption.recovery.keyCompromise.revokeExpiredCerts=false
op.enroll.userKey.keyGen.encryption.recovery.keyCompromise.scheme=GenerateNewKey

# Section when a token is marked terminated.

op.enroll.userKey.keyGen.encryption.recovery.terminated.holdRevocationUntilLastCredential=false
op.enroll.userKey.keyGen.encryption.recovery.terminated.revokeCert=true
op.enroll.userKey.keyGen.encryption.recovery.terminated.revokeCert.reason=1
op.enroll.userKey.keyGen.encryption.recovery.terminated.revokeExpiredCerts=false
op.enroll.userKey.keyGen.encryption.recovery.terminated.scheme=GenerateNewKey

# This section details the recovery profile with respect to which certs and of what kind get recovered on the token.

op.enroll.userKey.keyGen.recovery.destroyed.keyType.num=2
op.enroll.userKey.keyGen.recovery.destroyed.keyType.value.0=signing
op.enroll.userKey.keyGen.recovery.destroyed.keyType.value.1=encryption

op.enroll.userKey.keyGen.recovery.keyCompromise.keyType.value.0=signing
op.enroll.userKey.keyGen.recovery.keyCompromise.keyType.value.1=encryption
op.enroll.userKey.keyGen.recovery.onHold.keyType.num=2
op.enroll.userKey.keyGen.recovery.onHold.keyType.value.0=signing
op.enroll.userKey.keyGen.recovery.onHold.keyType.value.1=encryption

op.enroll.userKey.keyGen.signing.recovery.destroyed.holdRevocationUntilLastCredential=false
op.enroll.userKey.keyGen.signing.recovery.destroyed.revokeCert=true
op.enroll.userKey.keyGen.signing.recovery.destroyed.revokeCert.reason=0
op.enroll.userKey.keyGen.signing.recovery.destroyed.revokeExpiredCerts=false
op.enroll.userKey.keyGen.signing.recovery.destroyed.scheme=GenerateNewKey
op.enroll.userKey.keyGen.signing.recovery.keyCompromise.holdRevocationUntilLastCredential=false
op.enroll.userKey.keyGen.signing.recovery.keyCompromise.revokeCert=true
op.enroll.userKey.keyGen.signing.recovery.keyCompromise.revokeCert.reason=1
op.enroll.userKey.keyGen.signing.recovery.keyCompromise.revokeExpiredCerts=false
op.enroll.userKey.keyGen.signing.recovery.keyCompromise.scheme=GenerateNewKey
op.enroll.userKey.keyGen.signing.recovery.onHold.holdRevocationUntilLastCredential=false
op.enroll.userKey.keyGen.signing.recovery.onHold.revokeCert=true

op.enroll.userKey.keyGen.signing.recovery.onHold.revokeCert.reason=6
op.enroll.userKey.keyGen.signing.recovery.onHold.revokeExpiredCerts=false
op.enroll.userKey.keyGen.signing.recovery.onHold.scheme=GenerateNewKey
op.enroll.userKey.keyGen.signing.recovery.terminated.holdRevocationUntilLastCredential=false
op.enroll.userKey.keyGen.signing.recovery.terminated.revokeCert=true
op.enroll.userKey.keyGen.signing.recovery.terminated.revokeCert.reason=1
op.enroll.userKey.keyGen.signing.recovery.terminated.revokeExpiredCerts=false
op.enroll.userKey.keyGen.signing.recovery.terminated.scheme=GenerateNewKey

# Configuration for the case when we mark a token “onHold” or temporarily lost

op.enroll.userKeyTemporary.keyGen.encryption.recovery.onHold.revokeCert=true
op.enroll.userKeyTemporary.keyGen.encryption.recovery.onHold.revokeCert.reason=0
op.enroll.userKeyTemporary.keyGen.encryption.recovery.onHold.scheme=RecoverLast
op.enroll.userKeyTemporary.keyGen.recovery.onHold.keyType.num=2
op.enroll.userKeyTemporary.keyGen.recovery.onHold.keyType.value.0=signing
op.enroll.userKeyTemporary.keyGen.recovery.onHold.keyType.value.1=encryption
op.enroll.userKeyTemporary.keyGen.signing.recovery.onHold.revokeCert=true
op.enroll.userKeyTemporary.keyGen.signing.recovery.onHold.revokeCert.reason=0
op.enroll.userKeyTemporary.keyGen.signing.recovery.onHold.scheme=GenerateNewKey

op.format.userKey.update.applet.directory=/usr/share/pki/tps/applets
op.format.userKey.update.applet.emptyToken.enable=true
op.format.userKey.update.applet.encryption=true
op.format.userKey.update.applet.requiredVersion=1.4.54de790f