3.6. 保​​​​​​​存​​​​​​​网​​​​​​​络​​​​​​​数​​​​​​​据​​​​​​​包​​​​​​​过​​​​​​​滤​​​​​​​设​​​​​​​置​​​​​​​

在​​​​​​​为​​​​​​​您​​​​​​​的​​​​​​​系​​​​​​​统​​​​​​​配​​​​​​​置​​​​​​​了​​​​​​​正​​​​​​​确​​​​​​​的​​​​​​​网​​​​​​​络​​​​​​​数​​​​​​​据​​​​​​​包​​​​​​​过​​​​​​​滤​​​​​​​器​​​​​​​之​​​​​​​后​​​​​​​，请​​​​​​​保​​​​​​​存​​​​​​​设​​​​​​​置​​​​​​​以​​​​​​​便​​​​​​​在​​​​​​​重​​​​​​​启​​​​​​​后​​​​​​​可​​​​​​​重​​​​​​​新​​​​​​​载​​​​​​​入​​​​​​​。​​​​​​​对​​​​​​​于​​​​​​​ iptables，请​​​​​​​输​​​​​​​入​​​​​​​以​​​​​​​下​​​​​​​命​​​​​​​令​​​​​​​：

/sbin/service iptables save

这​​​​​​​可​​​​​​​将​​​​​​​这​​​​​​​些​​​​​​​设​​​​​​​置​​​​​​​保​​​​​​​存​​​​​​​到​​​​​​​ /etc/sysconfig/iptables 文​​​​​​​件​​​​​​​中​​​​​​​以​​​​​​​便​​​​​​​在​​​​​​​引​​​​​​​导​​​​​​​时​​​​​​​重​​​​​​​新​​​​​​​调​​​​​​​用​​​​​​​。​​​​​​​

Once this file is written, you are able to use the /sbin/service command to start, stop, and check the status (using the status switch) of iptables. The /sbin/service will automatically load the appropriate module for you. For an example of how to use the /sbin/service command, see 第 2.3 节 “启​​​​​​​动​​​​​​​ Piranha Configuration Tool服​​​​​​​务​​​​​​​”.

Finally, you need to be sure the appropriate service is set to activate on the proper runlevels. For more on this, see 第 2.1 节 “在​​​​​​​ LVS 路​​​​​​​由​​​​​​​器​​​​​​​中​​​​​​​配​​​​​​​置​​​​​​​服​​​​​​​务​​​​​​​”.

下​​​​​​​面​​​​​​​的​​​​​​​一​​​​​​​章​​​​​​​将​​​​​​​论​​​​​​​述​​​​​​​如​​​​​​​何​​​​​​​使​​​​​​​用​​​​​​​ Piranha Configuration Tool 配​​​​​​​置​​​​​​​ LVS 路​​​​​​​由​​​​​​​器​​​​​​​，并​​​​​​​描​​​​​​​述​​​​​​​了​​​​​​​激​​​​​​​活​​​​​​​ LVS 路​​​​​​​由​​​​​​​器​​​​​​​所​​​​​​​需​​​​​​​的​​​​​​​步​​​​​​​骤​​​​​​​。​​​​​​​