8.2. 在 Director 中配置 MTU 设置

本例演示了如何使用 NIC 配置模板设置 MTU。您必须在网桥、绑定（如果适用）、接口和 VLAN 中设置 MTU：

            -
              type: ovs_bridge
              name: br-isolated
              use_dhcp: false
              mtu: 9000    # <--- Set MTU
              members:
                -
                  type: ovs_bond
                  name: bond1
                  mtu: 9000    # <--- Set MTU
                  ovs_options: {get_param: BondInterfaceOvsOptions}
                  members:
                    -
                      type: interface
                      name: ens15f0
                      mtu: 9000    # <--- Set MTU
                      primary: true
                    -
                      type: interface
                      name: enp131s0f0
                      mtu: 9000    # <--- Set MTU
                -
                  type: vlan
                  device: bond1
                  vlan_id: {get_param: InternalApiNetworkVlanID}
                  mtu: 9000    # <--- Set MTU
                  addresses:
                  -
                    ip_netmask: {get_param: InternalApiIpSubnet}
                -
                  type: vlan
                  device: bond1
                  mtu: 9000    # <--- Set MTU
                  vlan_id: {get_param: TenantNetworkVlanID}
                  addresses:
                  -
                    ip_netmask: {get_param: TenantIpSubnet}