Dieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.

Appendix A. The mClock configuration options


This section contains the list of mClock configuration options:

osd_mclock_profile
Description

It sets the type of mClock profile to use for providing the quality of service (QoS) based on operations belonging to different classes, such as background recovery, backfill, pg scrub, snap trim, client op, and pg deletion.

Once a built-in profile is enabled, the lower-level mClock resource control parameters, that is reservation, weight, and limit, and some Ceph configuration parameters are set transparently. This does not apply for the custom profile.

Type
String
Default
balanced
Valid choices
balanced, high_recovery_ops, high_client_ops, custom
osd_mclock_max_capacity_iops_hdd
Description
It sets a maximum random write IOPS capacity, at 4 KiB block size, to consider per OSD for rotational media. Contributes in QoS calculations when enabling a dmclock profile. It is only considered for osd_op_queue = mclock_scheduler
Type
Float
Default
315.0
osd_mclock_max_capacity_iops_ssd
Description
It sets a maximum random write IOPS capacity, at 4 KiB block size, to consider per OSD for solid state media.
Type
Float
Default
21500.0
osd_mclock_cost_per_byte_usec_ssd
Description
Indicates cost per byte in microseconds to consider per OSD for SDDs.Contributes in QoS calculations when enabling a dmclock profile. It is only considered for osd_op_queue = mclock_scheduler
Type
Float
Default
0.011
osd_mclock_max_sequential_bandwidth_hdd
Description
Indicates the maximum sequential bandwidth in bytes to consider for an OSD whose underlying device type is rotational media. This is considered by the mclock scheduler to derive the cost factor to be used in QoS calculations. Only considered for osd_op_queue = mclock_scheduler
Type
Size
Default
150_M
osd_mclock_max_sequential_bandwidth_ssd
Description
Indicates the maximum sequential bandwidth in bytes to consider for an OSD whose underlying device type is solid state media. This is considered by the mclock scheduler to derive the cost factor to be used in QoS calculations. Only considered for osd_op_queue = mclock_scheduler
Type
Size
Default
1200_M
osd_mclock_force_run_benchmark_on_init
Description
This force-runs the OSD benchmark on OSD initialization or boot-up.
Type
Boolean
Default
False
See also
osd_mclock_max_capacity_iops_hdd, osd_mclock_max_capacity_iops_ssd
osd_mclock_skip_benchmark
Description
Setting this option skips the OSD benchmark on OSD initialization or boot-up.
Type
Boolean
Default
False
See also
osd_mclock_max_capacity_iops_hdd, osd_mclock_max_capacity_iops_ssd
osd_mclock_override_recovery_settings
Description
Setting this option enables the override of the recovery or backfill limits for the mClock scheduler as defined by the osd_recovery_max_active_hdd, osd_recovery_max_active_ssd, and osd_max_backfills options.
Type
Boolean
Default
False
See also
osd_recovery_max_active_hdd, osd_recovery_max_active_ssd, osd_max_backfills
osd_mclock_iops_capacity_threshold_hdd
Description
It indicates the threshold IOPS capacity, at 4KiB block size, beyond which to ignore the Ceph OSD bench results for an OSD for HDDs.
Type
Float
Default
500.0
osd_mclock_iops_capacity_threshold_ssd
Description
It indicates the threshold IOPS capacity, at 4KiB block size, beyond which to ignore the Ceph OSD bench results for an OSD for SSDs.
Type
Float
Default
80000.0
osd_mclock_scheduler_client_res
Description
It is the default I/O proportion reserved for each client. The default value of 0 specifies the lowest possible reservation. Any value greater than 0 and up to 1.0 specifies the minimum IO proportion to reserve for each client in terms of a fraction of the OSD’s maximum IOPS capacity.
Type
float
Default
0
min
0
max
1.0
osd_mclock_scheduler_client_wgt
Description
It is the default I/O share for each client over reservation.
Type
Unsigned integer
Default
1
osd_mclock_scheduler_client_lim
Description
It is the default I/O limit for each client over reservation. The default value of 0 specifies no limit enforcement, which means each client can use the maximum possible IOPS capacity of the OSD. Any value greater than 0 and up to 1.0 specifies the upper IO limit over reservation that each client receives in terms of a fraction of the OSD’s maximum IOPS capacity.
Type
float
Default
0
min
0
max
1.0
osd_mclock_scheduler_background_recovery_res
Description
It is the default I/O proportion reserved for background recovery. The default value of 0 specifies the lowest possible reservation. Any value greater than 0 and up to 1.0 specifies the minimum IO proportion to reserve for background recovery operations in terms of a fraction of the OSD’s maximum IOPS capacity.
Type
float
Default
0
min
0
max
1.0
osd_mclock_scheduler_background_recovery_wgt
Description
It indicates the I/O share for each background recovery over reservation.
Type
Unsigned integer
Default
1
osd_mclock_scheduler_background_recovery_lim
Description
It indicates the I/O limit for background recovery over reservation. The default value of 0 specifies no limit enforcement, which means background recovery operation can use the maximum possible IOPS capacity of the OSD. Any value greater than 0 and up to 1.0 specifies the upper IO limit over reservation that background recovery operation receives in terms of a fraction of the OSD’s maximum IOPS capacity.
Type
float
Default
0
min
0
max
1.0
osd_mclock_scheduler_background_best_effort_res
Description
It indicates the default I/O proportion reserved for background best_effort. The default value of 0 specifies the lowest possible reservation. Any value greater than 0 and up to 1.0 specifies the minimum IO proportion to reserve for background best_effort operations in terms of a fraction of the OSD’s maximum IOPS capacity.
Type
float
Default
0
min
0
max
1.0
osd_mclock_scheduler_background_best_effort_wgt
Description
It indicates the I/O share for each background best_effort over reservation.
Type
Unsigned integer
Default
1
osd_mclock_scheduler_background_best_effort_lim
Description
It indicates the I/O limit for background best_effort over reservation. The default value of 0 specifies no limit enforcement, which means background best_effort operation can use the maximum possible IOPS capacity of the OSD. Any value greater than 0 and up to 1.0 specifies the upper IO limit over reservation that background best_effort operation receives in terms of a fraction of the OSD’s maximum IOPS capacity.
Type
float
Default
0
min
0
max
1.0

Additional Resources

See Object Storage Daemon (OSD) configuration options for more details about osd_op_queue option.

Red Hat logoGithubRedditYoutubeTwitter

Lernen

Testen, kaufen und verkaufen

Communitys

Über Red Hat Dokumentation

Wir helfen Red Hat Benutzern, mit unseren Produkten und Diensten innovativ zu sein und ihre Ziele zu erreichen – mit Inhalten, denen sie vertrauen können.

Mehr Inklusion in Open Source

Red Hat hat sich verpflichtet, problematische Sprache in unserem Code, unserer Dokumentation und unseren Web-Eigenschaften zu ersetzen. Weitere Einzelheiten finden Sie in Red Hat Blog.

Über Red Hat

Wir liefern gehärtete Lösungen, die es Unternehmen leichter machen, plattform- und umgebungsübergreifend zu arbeiten, vom zentralen Rechenzentrum bis zum Netzwerkrand.

© 2024 Red Hat, Inc.