Red Hat Summit Red Hat SummitSupportKonsoleEntwicklerDemo startenKontakt

Dieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.

Chapter 1. Developing using containers and the cloud

1.1. Using Red Hat CodeReady Containers tooling in CodeReady Studio
Link kopieren

Red Hat CodeReady Containers (CRC) brings a minimal OpenShift 4 cluster to your local computer. This cluster provides a minimal environment for development and testing purposes. It is mainly targeted at running on developers' desktops. For other use cases, such as headless, multi-developer or team-based setups, use of the full-fledged OpenShift installer is recommended.

For a more in-depth introduction to OpenShift, see OpenShift documentation.

Prerequisites

  1. Download the latest release of CodeReady Containers and the pull secret.

  2. Extract the CRC file.

    For more information on how to install and set up CRC, see the Installation chapter of the Getting started with CodeReady Containers Guide.

The following section describes how to set up CodeReady Containers in CodeReady Studio. The section assumes you completed the steps listed in the prerequisites section for this chapter.

Procedure

  1. Start CodeReady Studio.

  2. Click Window Show View Other.

    The Show View window appears.

    crs opening servers view
    View larger image
    crs opening servers view
  3. Enter Server in the search field.
  4. Select Servers.

  5. Click Open.

    The Servers view appears.

    crs servers view empty
    View larger image
    crs servers view empty

  6. Right-click any area in the Servers view.

    crs srver view creating new server
    View larger image
    crs srver view creating new server

  7. Click New Server.

    The Define a New Server window appears.

    crs creating crc server
    View larger image
    crs creating crc server
  8. Select CodeReady Containers 1.0+.

  9. Click Next.

    The CodeReady Containers window appears.

    crs crc server adapter creation
    View larger image
    crs crc server adapter creation
  10. Click Browse to locate the CRC binary.
  11. Click Browse to locate the CRC Pull Secret File.
  12. Click Finish.

Your newly added CodeReady Containers 1.0+ server adapter is now listed in the Servers view.

crs crc server adapter created
View larger image
crs crc server adapter created

1.1.2. Using the OpenShift Container Platform tooling
Link kopieren

The following section describes how to use OpenShift Containers in CodeReady Studio.

Prerequisites

Procedure

  1. Start CodeReady Studio.

  2. Start the CRC server adapter.

    crs starting crc server adapter
    View larger image
    crs starting crc server adapter

  3. Click Window Show View Other.

    The Show View window appears.

    crs os explorer view
    View larger image
    crs os explorer view
  4. Enter OpenShift in the search field.
  5. Select OpenShift Explorer.

  6. Click Open.

    The OpenShift Explorer view appears.

  7. Press Ctrl+N.

    The Select a wizard window appears.

    crs openshift app creation
    View larger image
    crs openshift app creation
  8. Enter OpenShift in the search field.
  9. Select OpenShift Application.

  10. Click Next.

    The Sign in to OpenShift window appears.

    crs crc sing in to os
    View larger image
    crs crc sing in to os

  11. Click Next.

    The Create OpenShift Project window appears.

  12. Name your project.

  13. Click Finish.

    The Select template window appears.

    crs crc os selecting template
    View larger image
    crs crc os selecting template
  14. Select the template.

  15. Click Next.

    The Build Configuration window appears.

    crs buid config example
    View larger image
    crs buid config example
  16. Ensure that the build configurations are correct.
  17. Click Finish.

Your newly created OpenShift application project is now listed in the OpenShift Explorer view.

crs os project created
View larger image
crs os project created

Additional resources

Red Hat Container Development Kit (CDK) is a pre-built container development environment based on Red Hat Enterprise Linux (RHEL). CDK helps you get started with developing container-based applications quickly. You can easily set up CDK within CodeReady Studio.

1.2.1. Installing Container Development Kit in CodeReady Studio
Link kopieren

The following section describes how to install CDK from within CodeReady Studio.

Prerequisites

  • Ensure that the Hypervisor is installed and configured on your system:

    • VirtualBox, Linux KVM/libvirt (Linux)
    • xhyve (macOS)
    • Hyper-V (Windows)

  • Ensure that hardware virtualization is enabled on your system.

    For more information, see Setting Up the Virtualization Environment

  • Ensure that you have a Red Hat Developer account.

    For a new account, visit https://developers.redhat.com/.

For more information on CDK, see the Red Hat Container Development Kit Getting Started Guide.

Procedure

  1. Start CodeReady Studio.

  2. Click Window Show View Other.

    The Show View window appears.

    crs opening servers view
    View larger image
    crs opening servers view
  3. Enter Server in the search field.
  4. Select Servers.

  5. Click Open.

    The Servers view appears.

    crs servers view empty
    View larger image
    crs servers view empty

  6. Right-click any area in the Servers view.

    crs srver view creating new server
    View larger image
    crs srver view creating new server

  7. Click New Server.

    The Define a New Server window appears.

    crs creating cdk server
    View larger image
    crs creating cdk server
  8. Select Red Hat Container Development Kit 3.2+.

  9. Click Next.

    The Red Hat Container Development Environment window appears.

    crs creating cdk server2
    View larger image
    crs creating cdk server2

  10. Click Download and install runtime.

    The Download Runtimes window appears.

    crs cdk runtimes
    View larger image
    crs cdk runtimes
  11. Select a Red Hat CDK version.
  12. Click Next.
  13. Ensure that your sign-on credentials for access.redhat.com are correct.
  14. Click Next.
  15. Review and accept the license agreement and click Next.

  16. Select the installation folder and click Finish.

    Note that the process of downloading and installing the runtime might take some time to complete.

  17. Click Finish.

    Your newly created Container Development Environment 3.2+ server is now listed in the Servers view.

    crs cdk server in view
    View larger image
    crs cdk server in view

  18. Right-click CDK server adapter Start.

    crs startink cdk server adapter
    View larger image
    crs startink cdk server adapter
    Note

    In case you did not set up CDK prior to starting the server adapter, you will see a warning: CDK has not been properly initialized!.

    crs crc warning
    View larger image
    crs crc warning

    Follow the on-screen instructions to initialize CDK.

1.2.2. Using Docker tooling
Link kopieren

After starting the CDK server in the IDE, you can follow one of the two container development workflows to use the Docker tooling.

1.2.2.1. Creating a Dockerfile
Link kopieren

Prerequisites

Procedure

  1. Start CodeReady Studio.

  2. Start the CDK server adapter.

    crs startink cdk server adapter
    View larger image
    crs startink cdk server adapter

  3. Press Ctrl+N.

    The Select a wizard window appears.

    crs java project wizard
    View larger image
    crs java project wizard
  4. Enter Java Project in the search field.
  5. Select Java Project.

  6. Click Next.

    The New Java Project window appears.

    crs java project creation
    View larger image
    crs java project creation
  7. Name your project.
  8. Select the location for your project.

  9. Click Finish.

    Your newly created Java project is now listed in the CodeReady Studio view.

  10. Right-click your Java project New File.

    crs java project new file
    View larger image
    crs java project new file

    The Create New File window appears.

    crs creating docker file
    View larger image
    crs creating docker file
  11. Select the parent folder.
  12. Name your file.

  13. Click Finish.

    Your newly created file is now displayed in the CodeReady Studio editor.

  14. Paste the following content into your newly created file: 

        # Use latest jboss/base-jdk:8 image as the base
FROM jboss/base-jdk:8

# Set the WILDFLY_VERSION env variable
ENV WILDFLY_VERSION 10.1.0.Final
ENV WILDFLY_SHA1 9ee3c0255e2e6007d502223916cefad2a1a5e333
ENV JBOSS_HOME /opt/jboss/wildfly

USER root

# Add the WildFly distribution to /opt, and make wildfly the owner of the extracted tar content
# Make sure the distribution is available from a well-known place
RUN cd $HOME \
    && curl -O https://download.jboss.org/wildfly/$WILDFLY_VERSION/wildfly-$WILDFLY_VERSION.tar.gz \
    && sha1sum wildfly-$WILDFLY_VERSION.tar.gz | grep $WILDFLY_SHA1 \
    && tar xf wildfly-$WILDFLY_VERSION.tar.gz \
    && mv $HOME/wildfly-$WILDFLY_VERSION $JBOSS_HOME \
    && rm wildfly-$WILDFLY_VERSION.tar.gz \
    && chown -R jboss:0 ${JBOSS_HOME} \
    && chmod -R g+rw ${JBOSS_HOME}

    # Ensure signals are forwarded to the JVM process correctly for graceful shutdown
    ENV LAUNCH_JBOSS_IN_BACKGROUND true

    USER jboss

    # Expose the ports we're interested in
    EXPOSE 8080

    # Set the default command to run on boot
    # This will boot WildFly in the standalone mode and bind to all interface
    CMD ["/opt/jboss/wildfly/bin/standalone.sh", "-b", "0.0.0.0"]
    Copy to Clipboard Toggle word wrap
  15. Press Ctrl+S to save the changes.

Additional resources

Prerequisites

Procedure

  1. Start CodeReady Studio.

  2. Start the CDK server adapter.

    crs startink cdk server adapter
    View larger image
    crs startink cdk server adapter
  3. Expand your Java project.

  4. Right-click Dockerfile Run as Docker Image Build.

    crs run as docker image build
    View larger image
    crs run as docker image build

    The Docker Image Build Configuration window appears.

    crs creating docker image
    View larger image
    crs creating docker image
  5. Select your Container Development Environment server adapter as your connection.
  6. Name your image.
  7. Click OK.

The Console view appears displaying the docker image building process.

1.2.2.3. Additional resources
Link kopieren

1.2.3. Using the OpenShift Container Platform tooling
Link kopieren

The following section describes how to use OpenShift Containers in CodeReady Studio.

Prerequisites

Procedure

  1. Start CodeReady Studio.

  2. Start the CRC server adapter.

    crs starting crc server adapter
    View larger image
    crs starting crc server adapter

  3. Click Window Show View Other.

    The Show View window appears.

    crs os explorer view
    View larger image
    crs os explorer view
  4. Enter OpenShift in the search field.
  5. Select OpenShift Explorer.

  6. Click Open.

    The OpenShift Explorer view appears.

  7. Press Ctrl+N.

    The Select a wizard window appears.

    crs openshift app creation
    View larger image
    crs openshift app creation
  8. Enter OpenShift in the search field.
  9. Select OpenShift Application.

  10. Click Next.

    The Sign in to OpenShift window appears.

    crs crc sing in to os
    View larger image
    crs crc sing in to os

  11. Click Next.

    The Create OpenShift Project window appears.

  12. Name your project.

  13. Click Finish.

    The Select template window appears.

    crs crc os selecting template
    View larger image
    crs crc os selecting template
  14. Select the template.

  15. Click Next.

    The Build Configuration window appears.

    crs buid config example
    View larger image
    crs buid config example
  16. Ensure that the build configurations are correct.
  17. Click Finish.

Your newly created OpenShift application project is now listed in the OpenShift Explorer view.

crs os project created
View larger image
crs os project created

Additional resources

1.2.4. Additional resources
Link kopieren

Nach oben
Red Hat logoGithubredditYoutubeTwitter

Lernen

Testen, kaufen und verkaufen

Communitys

Über Red Hat Dokumentation

Wir helfen Red Hat Benutzern, mit unseren Produkten und Diensten innovativ zu sein und ihre Ziele zu erreichen – mit Inhalten, denen sie vertrauen können. Entdecken Sie unsere neuesten Updates.

Mehr Inklusion in Open Source

Red Hat hat sich verpflichtet, problematische Sprache in unserem Code, unserer Dokumentation und unseren Web-Eigenschaften zu ersetzen. Weitere Einzelheiten finden Sie in Red Hat Blog.

Über Red Hat

Wir liefern gehärtete Lösungen, die es Unternehmen leichter machen, plattform- und umgebungsübergreifend zu arbeiten, vom zentralen Rechenzentrum bis zum Netzwerkrand.

Theme

© 2025 Red Hat