Dieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.

6.5. Restore an ext2/3/4 File System


Procedure 6.2. Restore an ext2/3/4 File System Example

  1. If you are restoring an operating system partition, bootup your system into Rescue Mode. This step is not required for ordinary data partitions.
  2. Rebuild sda1/sda2/sda3/sda4/sda5 by using the fdisk command.

    Note

    If necessary, create the partitions to contain the restored file systems. The new partitions must be large enough to contain the restored data. It is important to get the start and end numbers right; these are the starting and ending sector numbers of the partitions.
  3. Format the destination partitions by using the mkfs command, as shown below.

    Important

    DO NOT format /dev/sda6 in the above example because it saves backup files.
    # mkfs.ext3 /dev/sda1
    # mkfs.ext3 /dev/sda2
    # mkfs.ext3 /dev/sda3
    
  4. If creating new partitions, re-label all the partitions so they match the fstab file. This step is not required if the partitions are not being recreated.
    # e2label /dev/sda1 /boot1
    # e2label /dev/sda2 /
    # e2label /dev/sda3 /data
    # mkswap -L SWAP-sda5 /dev/sda5
    
  5. Prepare the working directories.
    # mkdir /mnt/sda1
    # mount -t ext3 /dev/sda1 /mnt/sda1
    # mkdir /mnt/sda2
    # mount -t ext3 /dev/sda2 /mnt/sda2
    # mkdir /mnt/sda3
    # mount -t ext3 /dev/sda3 /mnt/sda3
    # mkdir /backup-files
    # mount -t ext3 /dev/sda6 /backup-files
    
  6. Restore the data.
    # cd /mnt/sda1
    # restore -rf /backup-files/sda1.dump
    # cd /mnt/sda2
    # restore -rf /backup-files/sda2.dump
    # cd /mnt/sda3
    # restore -rf /backup-files/sda3.dump
    
    If you want to restore from a remote host or restore from a backup file on a remote host you can use either ssh or rsh. You will need to configure a password-less login for the following examples:
    Login into 10.0.0.87, and restore sda1 from local sda1.dump file:
    # ssh 10.0.0.87 "cd /mnt/sda1 && cat /backup-files/sda1.dump | restore -rf -"
    
    Login into 10.0.0.87, and restore sda1 from a remote 10.66.0.124 sda1.dump file:
    # ssh 10.0.0.87 "cd /mnt/sda1 && RSH=/usr/bin/ssh restore -r -f 10.66.0.124:/tmp/sda1.dump"
    
  7. Reboot.
Red Hat logoGithubRedditYoutubeTwitter

Lernen

Testen, kaufen und verkaufen

Communitys

Über Red Hat Dokumentation

Wir helfen Red Hat Benutzern, mit unseren Produkten und Diensten innovativ zu sein und ihre Ziele zu erreichen – mit Inhalten, denen sie vertrauen können.

Mehr Inklusion in Open Source

Red Hat hat sich verpflichtet, problematische Sprache in unserem Code, unserer Dokumentation und unseren Web-Eigenschaften zu ersetzen. Weitere Einzelheiten finden Sie in Red Hat Blog.

Über Red Hat

Wir liefern gehärtete Lösungen, die es Unternehmen leichter machen, plattform- und umgebungsübergreifend zu arbeiten, vom zentralen Rechenzentrum bis zum Netzwerkrand.

© 2024 Red Hat, Inc.