Dieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.
Chapter 4. Upgrading a geo-replication deployment of standalone Red Hat Quay
Use the following procedure to upgrade your geo-replication Red Hat Quay deployment.
-
When upgrading geo-replication Red Hat Quay deployments to the next y-stream release (for example, Red Hat Quay 3.7
Red Hat Quay 3.8), or geo-replication deployments, you must stop operations before upgrading. - There is intermittent downtime down upgrading from one y-stream release to the next.
- It is highly recommended to back up your Red Hat Quay deployment before upgrading.
Prerequisites
-
You have logged into
registry.redhat.io
This procedure assumes that you are running Red Hat Quay services on three (or more) systems. For more information, see Preparing for Red Hat Quay high availability.
Obtain a list of all Red Hat Quay instances on each system running a Red Hat Quay instance.
Enter the following command on System A to reveal the Red Hat Quay instances:
$ sudo podman ps
Example output
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES ec16ece208c0 registry.redhat.io/quay/quay-rhel8:v{producty-n1} registry 6 minutes ago Up 6 minutes ago 0.0.0.0:80->8080/tcp, 0.0.0.0:443->8443/tcp quay01Enter the following command on System B to reveal the Red Hat Quay instances:
$ sudo podman ps
Example output
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 7ae0c9a8b37d registry.redhat.io/quay/quay-rhel8:v{producty-n1} registry 5 minutes ago Up 2 seconds ago 0.0.0.0:82->8080/tcp, 0.0.0.0:445->8443/tcp quay02Enter the following command on System C to reveal the Red Hat Quay instances:
$ sudo podman ps
Example output
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES e75c4aebfee9 registry.redhat.io/quay/quay-rhel8:v{producty-n1} registry 4 seconds ago Up 4 seconds ago 0.0.0.0:84->8080/tcp, 0.0.0.0:447->8443/tcp quay03
Temporarily shut down all Red Hat Quay instances on each system.
Enter the following command on System A to shut down the Red Hat Quay instance:
$ sudo podman stop ec16ece208c0
Enter the following command on System B to shut down the Red Hat Quay instance:
$ sudo podman stop 7ae0c9a8b37d
Enter the following command on System C to shut down the Red Hat Quay instance:
$ sudo podman stop e75c4aebfee9
Obtain the latest Red Hat Quay version, for example, Red Hat Quay 3.13, on each system.
Enter the following command on System A to obtain the latest Red Hat Quay version:
$ sudo podman pull registry.redhat.io/quay/quay-rhel8:{productminv}Enter the following command on System B to obtain the latest Red Hat Quay version:
$ sudo podman pull registry.redhat.io/quay/quay-rhel8:v{producty}Enter the following command on System C to obtain the latest Red Hat Quay version:
$ sudo podman pull registry.redhat.io/quay/quay-rhel8:{productminv}
On System A of your highly available Red Hat Quay deployment, run the new image version, for example, Red Hat Quay 3.13:
# sudo podman run --restart=always -p 443:8443 -p 80:8080 \ --sysctl net.core.somaxconn=4096 \ --name=quay01 \ -v /mnt/quay/config:/conf/stack:Z \ -v /mnt/quay/storage:/datastorage:Z \ -d registry.redhat.io/quay/quay-rhel8:{productminv}Wait for the new Red Hat Quay container to become fully operational on System A. You can check the status of the container by entering the following command:
$ sudo podman ps
Example output
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 70b9f38c3fb4 registry.redhat.io/quay/quay-rhel8:v{producty} registry 2 seconds ago Up 2 seconds ago 0.0.0.0:82->8080/tcp, 0.0.0.0:445->8443/tcp quay01- Optional: Ensure that Red Hat Quay is fully operation by navigating to the Red Hat Quay UI.
After ensuring that Red Hat Quay on System A is fully operational, run the new image versions on System B and on System C.
On System B of your highly available Red Hat Quay deployment, run the new image version, for example, Red Hat Quay 3.13:
# sudo podman run --restart=always -p 443:8443 -p 80:8080 \ --sysctl net.core.somaxconn=4096 \ --name=quay02 \ -v /mnt/quay/config:/conf/stack:Z \ -v /mnt/quay/storage:/datastorage:Z \ -d registry.redhat.io/quay/quay-rhel8:{productminv}On System C of your highly available Red Hat Quay deployment, run the new image version, for example, Red Hat Quay 3.13:
# sudo podman run --restart=always -p 443:8443 -p 80:8080 \ --sysctl net.core.somaxconn=4096 \ --name=quay03 \ -v /mnt/quay/config:/conf/stack:Z \ -v /mnt/quay/storage:/datastorage:Z \ -d registry.redhat.io/quay/quay-rhel8:{productminv}
You can check the status of the containers on System B and on System C by entering the following command:
$ sudo podman ps
