Installing on Azure

Procedure

1. Identify your domain, or subdomain, and registrar. You can transfer an existing domain and registrar or obtain a new one through Azure or another source.

   Note

   For more information about purchasing domains through Azure, see Buy a custom domain name for Azure App Service in the Azure documentation.

2. If you are using an existing domain and registrar, migrate its DNS to Azure. See Migrate an active DNS name to Azure App Service in the Azure documentation.

3. Configure DNS for your domain. Follow the steps in the Tutorial: Host your domain in Azure DNS in the Azure documentation to create a public hosted zone for your domain or subdomain, extract the new authoritative name servers, and update the registrar records for the name servers that your domain uses.

   Use an appropriate root domain, such as openshiftcorp.com, or subdomain, such as clusters.openshiftcorp.com.

4. If you use a subdomain, follow your company’s procedures to add its delegation records to the parent domain.

Procedure

1. From the Azure portal, click Help + support in the lower left corner.

2. Click New support request and then select the required values:

   1. From the Issue type list, select Service and subscription limits (quotas).
   2. From the Subscription list, select the subscription to modify.
   3. From the Quota type list, select the quota to increase. For example, select Compute-VM (cores-vCPUs) subscription limit increases to increase the number of vCPUs, which is required to install a cluster.
   4. Click Next: Solutions.

3. On the Problem Details page, provide the required information for your quota increase:

   1. Click Provide details and provide the required details in the Quota details window.
   2. In the SUPPORT METHOD and CONTACT INFO sections, provide the issue severity and your contact details.
4. Click Next: Review + create and then click Create.

Procedure

1. Log in to the Azure CLI:

   $ az login

   Log in to Azure in the web console by using your credentials.

2. If your Azure account uses subscriptions, ensure that you are using the right subscription.

   1. View the list of available accounts and record the tenantId value for the subscription you want to use for your cluster:

      $ az account list --refresh
      [
        {
          "cloudName": "AzureCloud",
          "id": "9bab1460-96d5-40b3-a78e-17b15e978a80",
          "isDefault": true,
          "name": "Subscription Name",
          "state": "Enabled",
          "tenantId": "6057c7e9-b3ae-489d-a54e-de3f6bf6a8ee",
          "user": {
            "name": "you@example.com",
            "type": "user"
          }
        }
      ]

   2. View your active account details and confirm that the tenantId value matches the subscription you want to use:

      $ az account show
      {
        "environmentName": "AzureCloud",
        "id": "9bab1460-96d5-40b3-a78e-17b15e978a80",
        "isDefault": true,
        "name": "Subscription Name",
        "state": "Enabled",
        "tenantId": "6057c7e9-b3ae-489d-a54e-de3f6bf6a8ee", 1
        "user": {
          "name": "you@example.com",
          "type": "user"
        }
      }

      1

      Ensure that the value of the tenantId parameter is the UUID of the correct subscription.

   3. If you are not using the right subscription, change the active subscription:

      $ az account set -s <id> 1

      1

      Substitute the value of the id for the subscription that you want to use for <id>.

   4. If you changed the active subscription, display your account information again:

      $ az account show
      
      {
        "environmentName": "AzureCloud",
        "id": "33212d16-bdf6-45cb-b038-f6565b61edda",
        "isDefault": true,
        "name": "Subscription Name",
        "state": "Enabled",
        "tenantId": "8049c7e9-c3de-762d-a54e-dc3f6be6a7ee",
        "user": {
          "name": "you@example.com",
          "type": "user"
        }
      }

3. Record the values of the tenantId and id parameters from the previous output. You need these values during OpenShift Container Platform installation.

4. Create the service principal for your account:

   $ az ad sp create-for-rbac --role Contributor --name <service_principal> 1
   Changing "<service_principal>" to a valid URI of "http://<service_principal>", which is the required format used for service principal names
   Retrying role assignment creation: 1/36
   Retrying role assignment creation: 2/36
   Retrying role assignment creation: 3/36
   Retrying role assignment creation: 4/36
   {
     "appId": "8bd0d04d-0ac2-43a8-928d-705c598c6956",
     "displayName": "<service_principal>",
     "name": "http://<service_principal>",
     "password": "ac461d78-bf4b-4387-ad16-7e32e328aec6",
     "tenant": "6048c7e9-b2ad-488d-a54e-dc3f6be6a7ee"
   }

   1

   Replace <service_principal> with the name to assign to the service principal.

5. Record the values of the appId and password parameters from the previous output. You need these values during OpenShift Container Platform installation.

6. Grant additional permissions to the service principal. The service principal requires the legacy Azure Active Directory Graph → Application.ReadWrite.OwnedBy permission and the User Access Administrator role for the cluster to assign credentials for its components.

   1. To assign the User Access Administrator role, run the following command:

      $ az role assignment create --role "User Access Administrator" \
          --assignee-object-id $(az ad sp list --filter "appId eq '<appId>'" \ 1
             | jq '.[0].objectId' -r)

      1

      Replace <appId> with the appId parameter value for your service principal.

   2. To assign the Azure Active Directory Graph permission, run the following command:

      $ az ad app permission add --id <appId> \ 1
           --api 00000002-0000-0000-c000-000000000000 \
           --api-permissions 824c81eb-e3f8-4ee6-8f6d-de7f50d565b7=Role
      
           Invoking "az ad app permission grant --id 46d33abc-b8a3-46d8-8c84-f0fd58177435 --api 00000002-0000-0000-c000-000000000000" is needed to make the change effective

      1

      Replace <appId> with the appId parameter value for your service principal.

      For more information about the specific permissions that you grant with this command, see the GUID Table for Windows Azure Active Directory Permissions.

   3. Approve the permissions request. If your account does not have the Azure Active Directory tenant administrator role, follow the guidelines for your organization to request that the tenant administrator approve your permissions request.

      $ az ad app permission grant --id <appId> \ 1
           --api 00000002-0000-0000-c000-000000000000

      1

      Replace <appId> with the appId parameter value for your service principal.

Procedure

1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

   $ ssh-keygen -t ed25519 -N '' \
       -f <path>/<file_name> 1

   1

   Specify the path and file name, such as ~/.ssh/id_rsa, of the SSH key. Do not specify an existing SSH key, as it will be overwritten.

   Running this command generates an SSH key that does not require a password in the location that you specified.

2. Start the ssh-agent process as a background task:

   $ eval "$(ssh-agent -s)"
   
   Agent pid 31874

3. Add your SSH private key to the ssh-agent:

   $ ssh-add <path>/<file_name> 1
   
   Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

   1

   Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

Procedure

1. Access the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.

2. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

   Important

   The installation program creates several files on the computer that you use to install your cluster. You must keep both the installation program and the files that the installation program creates after you finish installing the cluster.

   Important

   Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. You must complete the OpenShift Container Platform uninstallation procedures outlined for your specific cloud provider to remove your cluster entirely.

3. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

   $ tar xvf <installation_program>.tar.gz

4. From the Pull Secret page on the Red Hat OpenShift Cluster Manager site, download your installation pull secret as a .txt file. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

Procedure

1. Run the installation program:

   $ ./openshift-install create cluster --dir=<installation_directory> \ 1
       --log-level=info 2

   1

   For <installation_directory>, specify the directory name to store the files that the installation program creates.

   2

   To view different installation details, specify warn, debug, or error instead of info.

   Important

   Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

   Provide values at the prompts:

   1. Optional: Select an SSH key to use to access your cluster machines.

      Note

      For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

   2. Select azure as the platform to target.

   3. If you do not have a Microsoft Azure profile stored on your computer, specify the following Azure parameter values for your subscription and service principal:

      • azure subscription id: The subscription ID to use for the cluster. Specify the id value in your account output.
      • azure tenant id: The tenant ID. Specify the tenantId value in your account output.
      • azure service principal client id: The value of the appId parameter for the service principal.
      • azure service principal client secret: The value of the password parameter for the service principal.
   4. Select the region to deploy the cluster to.
   5. Select the base domain to deploy the cluster to. The base domain corresponds to the Azure DNS Zone that you created for your cluster.

   6. Enter a descriptive name for your cluster.

      Important

      All Azure resources that are available through public endpoints are subject to resource name restrictions, and you cannot create resources that use certain terms. For a list of terms that Azure restricts, see Resolve reserved resource name errors in the Azure documentation.

   7. Paste the pull secret that you obtained from the Pull Secret page on the Red Hat OpenShift Cluster Manager site.
   Note

   If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

   When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

   Important

   The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

   Important

   You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Procedure

1. Export the kubeadmin credentials:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

2. Verify you can run oc commands successfully using the exported configuration:

   $ oc whoami
   system:admin

Procedure

1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

   $ ssh-keygen -t ed25519 -N '' \
       -f <path>/<file_name> 1

   1

   Specify the path and file name, such as ~/.ssh/id_rsa, of the SSH key. Do not specify an existing SSH key, as it will be overwritten.

   Running this command generates an SSH key that does not require a password in the location that you specified.

2. Start the ssh-agent process as a background task:

   $ eval "$(ssh-agent -s)"
   
   Agent pid 31874

3. Add your SSH private key to the ssh-agent:

   $ ssh-add <path>/<file_name> 1
   
   Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

   1

   Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

Procedure

1. Access the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.

2. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

   Important

   The installation program creates several files on the computer that you use to install your cluster. You must keep both the installation program and the files that the installation program creates after you finish installing the cluster.

   Important

   Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. You must complete the OpenShift Container Platform uninstallation procedures outlined for your specific cloud provider to remove your cluster entirely.

3. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

   $ tar xvf <installation_program>.tar.gz

4. From the Pull Secret page on the Red Hat OpenShift Cluster Manager site, download your installation pull secret as a .txt file. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

Procedure

1. Create the install-config.yaml file.

   1. Run the following command:

      $ ./openshift-install create install-config --dir=<installation_directory> 1

      1

      For <installation_directory>, specify the directory name to store the files that the installation program creates.

      Important

      Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

   2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

         Note

         For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Select azure as the platform to target.

      3. If you do not have a Microsoft Azure profile stored on your computer, specify the following Azure parameter values for your subscription and service principal:

         • azure subscription id: The subscription ID to use for the cluster. Specify the id value in your account output.
         • azure tenant id: The tenant ID. Specify the tenantId value in your account output.
         • azure service principal client id: The value of the appId parameter for the service principal.
         • azure service principal client secret: The value of the password parameter for the service principal.
      4. Select the region to deploy the cluster to.
      5. Select the base domain to deploy the cluster to. The base domain corresponds to the Azure DNS Zone that you created for your cluster.

      6. Enter a descriptive name for your cluster.

         Important

         All Azure resources that are available through public endpoints are subject to resource name restrictions, and you cannot create resources that use certain terms. For a list of terms that Azure restricts, see Resolve reserved resource name errors in the Azure documentation.

      7. Paste the pull secret that you obtained from the Pull Secret page on the Red Hat OpenShift Cluster Manager site.
2. Modify the install-config.yaml file. You can find more information about the available parameters in the Installation configuration parameters section.

3. Back up the install-config.yaml file so that you can use it to install multiple clusters.

   Important

   The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

Procedure

1. Run the installation program:

   $ ./openshift-install create cluster --dir=<installation_directory> \ 1
       --log-level=info 2

   1

   For <installation_directory>, specify the location of your customized ./install-config.yaml file.

   2

   To view different installation details, specify warn, debug, or error instead of info.

   Note

   If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

   When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

   Important

   The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

   Important

   You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Procedure

1. Export the kubeadmin credentials:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

2. Verify you can run oc commands successfully using the exported configuration:

   $ oc whoami
   system:admin

Procedure

1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

   $ ssh-keygen -t ed25519 -N '' \
       -f <path>/<file_name> 1

   1

   Specify the path and file name, such as ~/.ssh/id_rsa, of the SSH key. Do not specify an existing SSH key, as it will be overwritten.

   Running this command generates an SSH key that does not require a password in the location that you specified.

2. Start the ssh-agent process as a background task:

   $ eval "$(ssh-agent -s)"
   
   Agent pid 31874

3. Add your SSH private key to the ssh-agent:

   $ ssh-add <path>/<file_name> 1
   
   Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

   1

   Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

Procedure

1. Access the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.

2. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

   Important

   The installation program creates several files on the computer that you use to install your cluster. You must keep both the installation program and the files that the installation program creates after you finish installing the cluster.

   Important

   Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. You must complete the OpenShift Container Platform uninstallation procedures outlined for your specific cloud provider to remove your cluster entirely.

3. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

   $ tar xvf <installation_program>.tar.gz

4. From the Pull Secret page on the Red Hat OpenShift Cluster Manager site, download your installation pull secret as a .txt file. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

Procedure

1. Create the install-config.yaml file.

   1. Run the following command:

      $ ./openshift-install create install-config --dir=<installation_directory> 1

      1

      For <installation_directory>, specify the directory name to store the files that the installation program creates.

      Important

      Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

   2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

         Note

         For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Select azure as the platform to target.

      3. If you do not have a Microsoft Azure profile stored on your computer, specify the following Azure parameter values for your subscription and service principal:

         • azure subscription id: The subscription ID to use for the cluster. Specify the id value in your account output.
         • azure tenant id: The tenant ID. Specify the tenantId value in your account output.
         • azure service principal client id: The value of the appId parameter for the service principal.
         • azure service principal client secret: The value of the password parameter for the service principal.
      4. Select the region to deploy the cluster to.
      5. Select the base domain to deploy the cluster to. The base domain corresponds to the Azure DNS Zone that you created for your cluster.

      6. Enter a descriptive name for your cluster.

         Important

         All Azure resources that are available through public endpoints are subject to resource name restrictions, and you cannot create resources that use certain terms. For a list of terms that Azure restricts, see Resolve reserved resource name errors in the Azure documentation.

      7. Paste the pull secret that you obtained from the Pull Secret page on the Red Hat OpenShift Cluster Manager site.
2. Modify the install-config.yaml file. You can find more information about the available parameters in the Installation configuration parameters section.

3. Back up the install-config.yaml file so that you can use it to install multiple clusters.

   Important

   The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

Procedure

1. Use the following command to create manifests:

   $ ./openshift-install create manifests --dir=<installation_directory> 1

   1

   For <installation_directory>, specify the name of the directory that contains the install-config.yaml file for your cluster.

2. Create a file that is named cluster-network-03-config.yml in the <installation_directory>/manifests/ directory:

   $ touch <installation_directory>/manifests/cluster-network-03-config.yml 1

   1

   For <installation_directory>, specify the directory name that contains the manifests/ directory for your cluster.

   After creating the file, several network configuration files are in the manifests/ directory, as shown:

   $ ls <installation_directory>/manifests/cluster-network-*

   Example output

   cluster-network-01-crd.yml
   cluster-network-02-config.yml
   cluster-network-03-config.yml

3. Open the cluster-network-03-config.yml file in an editor and enter a CR that describes the Operator configuration you want:

   apiVersion: operator.openshift.io/v1
   kind: Network
   metadata:
     name: cluster
   spec: 1
     clusterNetwork:
     - cidr: 10.128.0.0/14
       hostPrefix: 23
     serviceNetwork:
     - 172.30.0.0/16
     defaultNetwork:
       type: OpenShiftSDN
       openshiftSDNConfig:
         mode: NetworkPolicy
         mtu: 1450
         vxlanPort: 4789

   1

   The parameters for the spec parameter are only an example. Specify your configuration for the Cluster Network Operator in the CR.

   The CNO provides default values for the parameters in the CR, so you must specify only the parameters that you want to change.

4. Save the cluster-network-03-config.yml file and quit the text editor.
5. Optional: Back up the manifests/cluster-network-03-config.yml file. The installation program deletes the manifests/ directory when creating the cluster.

Procedure

1. Run the installation program:

   $ ./openshift-install create cluster --dir=<installation_directory> \ 1
       --log-level=info 2

   1

   For <installation_directory>, specify the location of your customized ./install-config.yaml file.

   2

   To view different installation details, specify warn, debug, or error instead of info.

   Note

   If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

   When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

   Important

   The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

   Important

   You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Procedure

1. Export the kubeadmin credentials:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

2. Verify you can run oc commands successfully using the exported configuration:

   $ oc whoami
   system:admin

Procedure

1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

   $ ssh-keygen -t ed25519 -N '' \
       -f <path>/<file_name> 1

   1

   Specify the path and file name, such as ~/.ssh/id_rsa, of the SSH key. Do not specify an existing SSH key, as it will be overwritten.

   Running this command generates an SSH key that does not require a password in the location that you specified.

2. Start the ssh-agent process as a background task:

   $ eval "$(ssh-agent -s)"
   
   Agent pid 31874

3. Add your SSH private key to the ssh-agent:

   $ ssh-add <path>/<file_name> 1
   
   Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

   1

   Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

Procedure

1. Access the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.

2. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

   Important

   The installation program creates several files on the computer that you use to install your cluster. You must keep both the installation program and the files that the installation program creates after you finish installing the cluster.

   Important

   Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. You must complete the OpenShift Container Platform uninstallation procedures outlined for your specific cloud provider to remove your cluster entirely.

3. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

   $ tar xvf <installation_program>.tar.gz

4. From the Pull Secret page on the Red Hat OpenShift Cluster Manager site, download your installation pull secret as a .txt file. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

Procedure

1. Create the install-config.yaml file.

   1. Run the following command:

      $ ./openshift-install create install-config --dir=<installation_directory> 1

      1

      For <installation_directory>, specify the directory name to store the files that the installation program creates.

      Important

      Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

   2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

         Note

         For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Select azure as the platform to target.

      3. If you do not have a Microsoft Azure profile stored on your computer, specify the following Azure parameter values for your subscription and service principal:

         • azure subscription id: The subscription ID to use for the cluster. Specify the id value in your account output.
         • azure tenant id: The tenant ID. Specify the tenantId value in your account output.
         • azure service principal client id: The value of the appId parameter for the service principal.
         • azure service principal client secret: The value of the password parameter for the service principal.
      4. Select the region to deploy the cluster to.
      5. Select the base domain to deploy the cluster to. The base domain corresponds to the Azure DNS Zone that you created for your cluster.

      6. Enter a descriptive name for your cluster.

         Important

         All Azure resources that are available through public endpoints are subject to resource name restrictions, and you cannot create resources that use certain terms. For a list of terms that Azure restricts, see Resolve reserved resource name errors in the Azure documentation.

      7. Paste the pull secret that you obtained from the Pull Secret page on the Red Hat OpenShift Cluster Manager site.
2. Modify the install-config.yaml file. You can find more information about the available parameters in the Installation configuration parameters section.

3. Back up the install-config.yaml file so that you can use it to install multiple clusters.

   Important

   The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

Procedure

1. Run the installation program:

   $ ./openshift-install create cluster --dir=<installation_directory> \ 1
       --log-level=info 2

   1

   For <installation_directory>, specify the location of your customized ./install-config.yaml file.

   2

   To view different installation details, specify warn, debug, or error instead of info.

   Note

   If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

   When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

   Important

   The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

   Important

   You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Procedure

1. Export the kubeadmin credentials:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

2. Verify you can run oc commands successfully using the exported configuration:

   $ oc whoami
   system:admin

Procedure

1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

   $ ssh-keygen -t ed25519 -N '' \
       -f <path>/<file_name> 1

   1

   Specify the path and file name, such as ~/.ssh/id_rsa, of the SSH key. Do not specify an existing SSH key, as it will be overwritten.

   Running this command generates an SSH key that does not require a password in the location that you specified.

2. Start the ssh-agent process as a background task:

   $ eval "$(ssh-agent -s)"
   
   Agent pid 31874

3. Add your SSH private key to the ssh-agent:

   $ ssh-add <path>/<file_name> 1
   
   Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

   1

   Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

Procedure

1. Access the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.

2. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

   Important

   The installation program creates several files on the computer that you use to install your cluster. You must keep both the installation program and the files that the installation program creates after you finish installing the cluster.

   Important

   Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. You must complete the OpenShift Container Platform uninstallation procedures outlined for your specific cloud provider to remove your cluster entirely.

3. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

   $ tar xvf <installation_program>.tar.gz

4. From the Pull Secret page on the Red Hat OpenShift Cluster Manager site, download your installation pull secret as a .txt file. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

Procedure

1. Create an installation directory to store your required installation assets in:

   $ mkdir <installation_directory>

   Important

   You must create a directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

2. Customize the following install-config.yaml file template and save it in the <installation_directory>.

   Note

   You must name this configuration file install-config.yaml.

3. Back up the install-config.yaml file so that you can use it to install multiple clusters.

   Important

   The install-config.yaml file is consumed during the next step of the installation process. You must back it up now.

Procedure

1. Run the installation program:

   $ ./openshift-install create cluster --dir=<installation_directory> \ 1
       --log-level=info 2

   1

   For <installation_directory>, specify the

   2

   To view different installation details, specify warn, debug, or error instead of info.

   Note

   If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

   When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

   Important

   The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

   Important

   You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Procedure

1. Export the kubeadmin credentials:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

2. Verify you can run oc commands successfully using the exported configuration:

   $ oc whoami
   system:admin

Procedure

1. Access the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.

2. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

   Important

   The installation program creates several files on the computer that you use to install your cluster. You must keep both the installation program and the files that the installation program creates after you finish installing the cluster.

   Important

   Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. You must complete the OpenShift Container Platform uninstallation procedures outlined for your specific cloud provider to remove your cluster entirely.

3. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

   $ tar xvf <installation_program>.tar.gz

4. From the Pull Secret page on the Red Hat OpenShift Cluster Manager site, download your installation pull secret as a .txt file. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

Procedure

1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

   $ ssh-keygen -t ed25519 -N '' \
       -f <path>/<file_name> 1

   1

   Specify the path and file name, such as ~/.ssh/id_rsa, of the SSH key. Do not specify an existing SSH key, as it will be overwritten.

   Running this command generates an SSH key that does not require a password in the location that you specified.

2. Start the ssh-agent process as a background task:

   $ eval "$(ssh-agent -s)"
   
   Agent pid 31874

3. Add your SSH private key to the ssh-agent:

   $ ssh-add <path>/<file_name> 1
   
   Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

   1

   Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

Procedure

1. Create the resource group in a supported Azure region:

   $ az group create --name ${RESOURCE_GROUP} --location ${AZURE_REGION}

2. Create an Azure identity for the resource group:

   $ az identity create -g ${RESOURCE_GROUP} -n ${INFRA_ID}-identity

   This is used to grant the required access to Operators in your cluster. For example, this allows the Ingress Operator to create a public IP and its load balancer. You must assign the Azure identity to a role.

3. Grant the Contributor role to the Azure identity:

   1. Export the following variables required by the Azure role assignment:

      $ export PRINCIPAL_ID=`az identity show -g ${RESOURCE_GROUP} -n ${INFRA_ID}-identity --query principalId --out tsv`
      $ export RESOURCE_GROUP_ID=`az group show -g ${RESOURCE_GROUP} --query id --out tsv`

   2. Assign the Contributor role to the identity:

      $ az role assignment create --assignee "${PRINCIPAL_ID}" --role 'Contributor' --scope "${RESOURCE_GROUP_ID}"

Procedure

1. Create an Azure storage account to store the VHD cluster image:

   $ az storage account create -g ${RESOURCE_GROUP} --location ${AZURE_REGION} --name ${CLUSTER_NAME}sa --kind Storage --sku Standard_LRS

   Warning

   The Azure storage account name must be between 3 and 24 characters in length and use numbers and lower-case letters only. If your CLUSTER_NAME variable does not follow these restrictions, you must manually define the Azure storage account name. For more information on Azure storage account name restrictions, see Resolve errors for storage account names in the Azure documentation.

2. Export the storage account key as an environment variable:

   $ export ACCOUNT_KEY=`az storage account keys list -g ${RESOURCE_GROUP} --account-name ${CLUSTER_NAME}sa --query "[0].value" -o tsv`

3. Choose the RHCOS version to use and export the URL of its VHD to an environment variable:

   $ export VHD_URL=`curl -s https://raw.githubusercontent.com/openshift/installer/release-4.4/data/data/rhcos.json | jq -r .azure.url`

   Important

   The RHCOS images might not change with every release of OpenShift Container Platform. You must specify an image with the highest version that is less than or equal to the OpenShift Container Platform version that you install. Use the image version that matches your OpenShift Container Platform version if it is available.

4. Copy the chosen VHD to a blob:

   $ az storage container create --name vhd --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY}
   $ az storage blob copy start --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY} --destination-blob "rhcos.vhd" --destination-container vhd --source-uri "${VHD_URL}"

   To track the progress of the VHD copy task, run this script:

   status="unknown"
   while [ "$status" != "success" ]
   do
     status=`az storage blob show --container-name vhd --name "rhcos.vhd" --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY} -o tsv --query properties.copy.status`
     echo $status
   done

5. Create a blob storage container and upload the generated bootstrap.ign file:

   $ az storage container create --name files --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY} --public-access blob
   $ az storage blob upload --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY} -c "files" -f "<installation_directory>/bootstrap.ign" -n "bootstrap.ign"

Procedure

1. Create the new public DNS zone in the resource group exported in the BASE_DOMAIN_RESOURCE_GROUP environment variable:

   $ az network dns zone create -g ${BASE_DOMAIN_RESOURCE_GROUP} -n ${CLUSTER_NAME}.${BASE_DOMAIN}

   You can skip this step if you are using a public DNS zone that already exists.

2. Create the private DNS zone in the same resource group as the rest of this deployment:

   $ az network private-dns zone create -g ${RESOURCE_GROUP} -n ${CLUSTER_NAME}.${BASE_DOMAIN}

Procedure

1. Copy the template from the ARM template for the VNet section of this topic and save it as 01_vnet.json in your cluster’s installation directory. This template describes the VNet that your cluster requires.

2. Create the deployment by using the az CLI:

   $ az deployment group create -g ${RESOURCE_GROUP} \
     --template-file "<installation_directory>/01_vnet.json" \
     --parameters baseName="${INFRA_ID}"1

   1

   The base name to be used in resource names; this is usually the cluster’s infrastructure ID.

3. Link the VNet template to the private DNS zone:

   $ az network private-dns link vnet create -g ${RESOURCE_GROUP} -z ${CLUSTER_NAME}.${BASE_DOMAIN} -n ${INFRA_ID}-network-link -v "${INFRA_ID}-vnet" -e false

Procedure

1. Copy the template from the ARM template for image storage section of this topic and save it as 02_storage.json in your cluster’s installation directory. This template describes the image storage that your cluster requires.

2. Export the RHCOS VHD blob URL as a variable:

   $ export VHD_BLOB_URL=`az storage blob url --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY} -c vhd -n "rhcos.vhd" -o tsv`

3. Deploy the cluster image:

   $ az deployment group create -g ${RESOURCE_GROUP} \
     --template-file "<installation_directory>/02_storage.json" \
     --parameters vhdBlobURL="${VHD_BLOB_URL}" \ 1
     --parameters baseName="${INFRA_ID}"2

   1

   The blob URL of the RHCOS VHD to be used to create master and worker machines.

   2

   The base name to be used in resource names; this is usually the cluster’s infrastructure ID.

Procedure

1. Copy the template from the ARM template for the network and load balancers section of this topic and save it as 03_infra.json in your cluster’s installation directory. This template describes the networking and load balancing objects that your cluster requires.

2. Create the deployment by using the az CLI:

   $ az deployment group create -g ${RESOURCE_GROUP} \
     --template-file "<installation_directory>/03_infra.json" \
     --parameters privateDNSZoneName="${CLUSTER_NAME}.${BASE_DOMAIN}" \ 1
     --parameters baseName="${INFRA_ID}"2

   1

   The name of the private DNS zone.

   2

   The base name to be used in resource names; this is usually the cluster’s infrastructure ID.

3. Create an api DNS record in the public zone for the API public load balancer. The ${BASE_DOMAIN_RESOURCE_GROUP} variable must point to the resource group where the public DNS zone exists.

   1. Export the following variable:

      $ export PUBLIC_IP=`az network public-ip list -g ${RESOURCE_GROUP} --query "[?name=='${INFRA_ID}-master-pip'] | [0].ipAddress" -o tsv`

   2. Create the DNS record in a new public zone:

      $ az network dns record-set a add-record -g ${BASE_DOMAIN_RESOURCE_GROUP} -z ${CLUSTER_NAME}.${BASE_DOMAIN} -n api -a ${PUBLIC_IP} --ttl 60

   3. If you are adding the cluster to an existing public zone, you can create the DNS record in it instead:

      $ az network dns record-set a add-record -g ${BASE_DOMAIN_RESOURCE_GROUP} -z ${BASE_DOMAIN} -n api.${CLUSTER_NAME} -a ${PUBLIC_IP} --ttl 60

Procedure

1. Copy the template from the ARM template for the bootstrap machine section of this topic and save it as 04_bootstrap.json in your cluster’s installation directory. This template describes the bootstrap machine that your cluster requires.

2. Export the following variables required by the bootstrap machine deployment:

   $ export BOOTSTRAP_URL=`az storage blob url --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY} -c "files" -n "bootstrap.ign" -o tsv`
   $ export BOOTSTRAP_IGNITION=`jq -rcnM --arg v "2.2.0" --arg url ${BOOTSTRAP_URL} '{ignition:{version:$v,config:{replace:{source:$url}}}}' | base64 -w0`

3. Create the deployment by using the az CLI:

   $ az deployment group create -g ${RESOURCE_GROUP} \
     --template-file "<installation_directory>/04_bootstrap.json" \
     --parameters bootstrapIgnition="${BOOTSTRAP_IGNITION}" \ 1
     --parameters sshKeyData="${SSH_KEY}" \ 2
     --parameters baseName="${INFRA_ID}" 3

   1

   The bootstrap Ignition content for the bootstrap cluster.

   2

   The SSH RSA public key file as a string.

   3

   The base name to be used in resource names; this is usually the cluster’s infrastructure ID.

Procedure

1. Copy the template from the ARM template for control plane machines section of this topic and save it as 05_masters.json in your cluster’s installation directory. This template describes the control plane machines that your cluster requires.

2. Export the following variable needed by the control plane machine deployment:

   $ export MASTER_IGNITION=`cat <installation_directory>/master.ign | base64`

3. Create the deployment by using the az CLI:

   $ az deployment group create -g ${RESOURCE_GROUP} \
     --template-file "<installation_directory>/05_masters.json" \
     --parameters masterIgnition="${MASTER_IGNITION}" \ 1
     --parameters sshKeyData="${SSH_KEY}" \ 2
     --parameters privateDNSZoneName="${CLUSTER_NAME}.${BASE_DOMAIN}"3
     --parameters baseName="${INFRA_ID}"4

   1

   The Ignition content for the master nodes.

   2

   The SSH RSA public key file as a string.

   3

   The name of the private DNS zone to which the master nodes are attached.

   4

   The base name to be used in resource names; this is usually the cluster’s infrastructure ID.

Procedure

1. Change to the directory that contains the installation program and run the following command:

   $ ./openshift-install wait-for bootstrap-complete --dir=<installation_directory> \ 1
       --log-level info 2

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

   2

   To view different installation details, specify warn, debug, or error instead of info.

   If the command exits without a FATAL warning, your production control plane has initialized.

2. Delete the bootstrap resources:

   $ az network nsg rule delete -g ${RESOURCE_GROUP} --nsg-name ${INFRA_ID}-nsg --name bootstrap_ssh_in
   $ az vm stop -g ${RESOURCE_GROUP} --name ${INFRA_ID}-bootstrap
   $ az vm deallocate -g ${RESOURCE_GROUP} --name ${INFRA_ID}-bootstrap
   $ az vm delete -g ${RESOURCE_GROUP} --name ${INFRA_ID}-bootstrap --yes
   $ az disk delete -g ${RESOURCE_GROUP} --name ${INFRA_ID}-bootstrap_OSDisk --no-wait --yes
   $ az network nic delete -g ${RESOURCE_GROUP} --name ${INFRA_ID}-bootstrap-nic --no-wait
   $ az storage blob delete --account-key ${ACCOUNT_KEY} --account-name ${CLUSTER_NAME}sa --container-name files --name bootstrap.ign
   $ az network public-ip delete -g ${RESOURCE_GROUP} --name ${INFRA_ID}-bootstrap-ssh-pip

Procedure

1. Copy the template from the ARM template for worker machines section of this topic and save it as 06_workers.json in your cluster’s installation directory. This template describes the worker machines that your cluster requires.

2. Export the following variable needed by the worker machine deployment:

   $ export WORKER_IGNITION=`cat <installation_directory>/worker.ign | base64`

3. Create the deployment by using the az CLI:

   $ az deployment group create -g ${RESOURCE_GROUP} \
     --template-file "<installation_directory>/06_workers.json" \
     --parameters workerIgnition="${WORKER_IGNITION}" \ 1
     --parameters sshKeyData="${SSH_KEY}" \ 2
     --parameters baseName="${INFRA_ID}" 3

   1

   The Ignition content for the worker nodes.

   2

   The SSH RSA public key file as a string.

   3

   The base name to be used in resource names; this is usually the cluster’s infrastructure ID.

Procedure

1. Export the kubeadmin credentials:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

2. Verify you can run oc commands successfully using the exported configuration:

   $ oc whoami
   system:admin

Procedure

1. Confirm that the cluster recognizes the machines:

   # oc get nodes
   
   NAME                    STATUS   ROLES    AGE   VERSION
   master-01.example.com   Ready    master   40d   v1.17.1
   master-02.example.com   Ready    master   40d   v1.17.1
   master-03.example.com   Ready    master   40d   v1.17.1
   worker-01.example.com   Ready    worker   40d   v1.17.1
   worker-02.example.com   Ready    worker   40d   v1.17.1

   The output lists all of the machines that you created.

2. Review the pending CSRs and ensure that you see the client requests with the Pending or Approved status for each machine that you added to the cluster:

   $ oc get csr
   
   NAME        AGE     REQUESTOR                                                                   CONDITION
   csr-8b2br   15m     system:serviceaccount:openshift-machine-config-operator:node-bootstrapper   Pending
   csr-8vnps   15m     system:serviceaccount:openshift-machine-config-operator:node-bootstrapper   Pending
   ...

   In this example, two machines are joining the cluster. You might see more approved CSRs in the list.

3. If the CSRs were not approved, after all of the pending CSRs for the machines you added are in Pending status, approve the CSRs for your cluster machines:

   Note

   Because the CSRs rotate automatically, approve your CSRs within an hour of adding the machines to the cluster. If you do not approve them within an hour, the certificates will rotate, and more than two certificates will be present for each node. You must approve all of these certificates. After you approve the initial CSRs, the subsequent node client CSRs are automatically approved by the cluster kube-controller-manager. You must implement a method of automatically approving the kubelet serving certificate requests.

   • To approve them individually, run the following command for each valid CSR:

     $ oc adm certificate approve <csr_name> 1

     1

     <csr_name> is the name of a CSR from the list of current CSRs.

   • To approve all pending CSRs, run the following command:

     $ oc get csr -o go-template='{{range .items}}{{if not .status}}{{.metadata.name}}{{"\n"}}{{end}}{{end}}' | xargs oc adm certificate approve

4. Now that your client requests are approved, you must review the server requests for each machine that you added to the cluster:

   $ oc get csr

   Example output

   NAME        AGE     REQUESTOR                                                                   CONDITION
   csr-bfd72   5m26s   system:node:ip-10-0-50-126.us-east-2.compute.internal                       Pending
   csr-c57lv   5m26s   system:node:ip-10-0-95-157.us-east-2.compute.internal                       Pending
   ...

5. If the remaining CSRs are not approved, and are in the Pending status, approve the CSRs for your cluster machines:

   • To approve them individually, run the following command for each valid CSR:

     $ oc adm certificate approve <csr_name> 1

     1

     <csr_name> is the name of a CSR from the list of current CSRs.

   • To approve all pending CSRs, run the following command:

     $ oc get csr -o go-template='{{range .items}}{{if not .status}}{{.metadata.name}}{{"\n"}}{{end}}{{end}}' | xargs oc adm certificate approve

6. After all client and server CSRs have been approved, the machines have the Ready status. Verify this by running the following command:

   $ oc get nodes

   Example output

   NAME      STATUS    ROLES   AGE  VERSION
   master-0  Ready     master  73m  v1.20.0
   master-1  Ready     master  73m  v1.20.0
   master-2  Ready     master  74m  v1.20.0
   worker-0  Ready     worker  11m  v1.20.0
   worker-1  Ready     worker  11m  v1.20.0

   Note

   It can take a few minutes after approval of the server CSRs for the machines to transition to the Ready status.

Procedure

1. Confirm the Ingress router has created a load balancer and populated the EXTERNAL-IP field:

   $ oc -n openshift-ingress get service router-default
   NAME             TYPE           CLUSTER-IP      EXTERNAL-IP     PORT(S)                      AGE
   router-default   LoadBalancer   172.30.20.10   35.130.120.110   80:32288/TCP,443:31215/TCP   20

2. Export the Ingress router IP as a variable:

   $ export PUBLIC_IP_ROUTER=`oc -n openshift-ingress get service router-default --no-headers | awk '{print $4}'`

3. Add a *.apps record to the public DNS zone.

   1. If you are adding this cluster to a new public zone, run:

      $ az network dns record-set a add-record -g ${BASE_DOMAIN_RESOURCE_GROUP} -z ${CLUSTER_NAME}.${BASE_DOMAIN} -n *.apps -a ${PUBLIC_IP_ROUTER} --ttl 300

   2. If you are adding this cluster to an already existing public zone, run:

      $ az network dns record-set a add-record -g ${BASE_DOMAIN_RESOURCE_GROUP} -z ${BASE_DOMAIN} -n *.apps.${CLUSTER_NAME} -a ${PUBLIC_IP_ROUTER} --ttl 300

4. Add a *.apps record to the private DNS zone:

   $ az network private-dns record-set a create -g ${RESOURCE_GROUP} -z ${CLUSTER_NAME}.${BASE_DOMAIN} -n *.apps --ttl 300
   $ az network private-dns record-set a add-record -g ${RESOURCE_GROUP} -z ${CLUSTER_NAME}.${BASE_DOMAIN} -n *.apps -a ${PUBLIC_IP_ROUTER}

Procedure

1. From the computer that you used to install the cluster, run the following command:

   $ ./openshift-install destroy cluster \
   --dir=<installation_directory> --log-level=info 1 2

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

   2

   To view different details, specify warn, debug, or error instead of info.

   Note

   You must specify the directory that contains the cluster definition files for your cluster. The installation program requires the metadata.json file in this directory to delete the cluster.

2. Optional: Delete the <installation_directory> directory and the OpenShift Container Platform installation program.