Chapter 8. Managing network policies
A Kubernetes network policy is a specification of how groups of pods are allowed to communicate with each other and other network endpoints. These network policies are configured as YAML files. By looking at these files alone, it is often hard to identify whether the applied network policies achieve the desired network topology.
Red Hat Advanced Cluster Security for Kubernetes (RHACS) gathers all defined network policies from your orchestrator and provides tools to make these policies easier to use.
To support network policy enforcement, RHACS provides the following tools:
- Network graph
- Network policy generator
- Network policy simulator
- Build-time network policy generator
8.1. Network graph
8.1.1. About the network graph
The network graph provides high-level and detailed information about deployments, network flows, and network policies in your environment.
RHACS processes all network policies in each secured cluster to show you which deployments can contact each other and which can reach external networks. It also monitors running deployments and tracks traffic between them. You can view the following items in the network graph:
- Network components
- From the top menu, you can select namespaces (indicated by the NS label) and deployments (indicated by the D label) to display on the graph for a chosen cluster (indicated by the CL label). You can further filter deployments by using the drop-down list and selecting criteria on which to filter, such as common vulnerabilities and exposures (CVEs), labels, and images.
- External entities
- These represent entities that are connected outside of your cluster. For more information, see "External entities and connections in the network graph".
- Network policies
- You can view existing policies for a selected component or view components that have no policies.
- Network flows
- You can select one of the following flows for the graph:
- Active traffic
- Selecting this default option shows observed traffic, focused on the namespace or specific deployment that you selected. You can select the time period for which to display information.
- Inactive flows
- Selecting this option shows potential flows allowed by your network policies, helping you identify missing network policies needed to achieve tighter isolation. You can select the time period for which to display information.
You can also simulate network policies from the network graph view. See "Simulating network policies from the network graph" for more information.
Navigation and user interface in the network graph
- Clicking on items in the graph lets you view additional information about components or perform actions such as adding a network flow to your baseline.
- Opening the legend provides information about the symbols in use and their meaning. The legend shows explanatory text for symbols representing namespaces, deployments, and connections on the network graph.
- Selecting additional display options from the drop-down list controls whether the graph displays icons such as the network policy status badge, active external traffic badge, and port and protocol labels for edge connections.
- RHACS detects changes in network traffic, such as nodes joining or leaving. If changes are detected, the network graph displays a notification showing the number of updates available. To avoid interrupting your focus, the graph is not updated automatically. Click the notification to update the graph.
External entities and connections in the network graph
The network graph view shows network connections between managed clusters and external sources. In addition, RHACS automatically discovers and highlights public Classless Inter-Domain Routing (CIDR) address blocks, such as Google Cloud, AWS, Microsoft Azure, Oracle Cloud, and Cloudflare. Using this information, you can identify deployments with active external connections and decide if they are making or receiving unauthorized connections from outside your network.
By default, the external connections point to a common External Entities icon and different CIDR address blocks in the network graph. However, you can choose not to show auto-discovered CIDR blocks by clicking Manage CIDR blocks and deselecting Auto-discovered CIDR blocks.
RHACS includes IP ranges for the following cloud providers:
- Google Cloud
- AWS
- Microsoft Azure
- Oracle Cloud
- Cloudflare
RHACS fetches and updates the cloud providers' IP ranges every 7 days, and updates CIDR blocks daily. If you are using offline mode, you can update these ranges by installing new support packages.
The following image provides an example of the network graph. In this example, based on the options that the user has chosen, the graph depicts deployments in the selected namespace. Traffic flows are not displayed until you click on an item such as a deployment. The graph uses a red badge to indicate deployments that are missing policies and therefore allowing all network traffic.
Figure 8.1. Network graph example
![Overview of the Network graph showing deployments](https://access.redhat.com/webassets/avalon/d/Red_Hat_Advanced_Cluster_Security_for_Kubernetes-4.3-Operating-en-US/images/9e4f415923939020fbd6ca6ece78fe76/network-graph-20-overview-updated.png)
When you click an item in the graph, the rearranged side panel with collapsible sections presents information about that item. You can click on the following items:
- Deployments
- Namespaces
- External entities
- CIDR blocks
- External groups
The side panel displays relevant information based on the item in the graph that you have selected. The D or NS label next to the item name in the header (in this example, "visa-processor,") indicates if it is a deployment or a namespace. The following example illustrates the side panel for a deployment.
Figure 8.2. Side panel for a deployment example
![Side panel for a deployment](https://access.redhat.com/webassets/avalon/d/Red_Hat_Advanced_Cluster_Security_for_Kubernetes-4.3-Operating-en-US/images/4b9385acd59a629111c6ec5b5bc884e8/network-graph-20-deployment-mode-updated.png)
When viewing a namespace, the side panel includes a search bar and a list of deployments. You can click on a deployment to view its information. The side panel also includes a Network policies tab. From this tab, you can view, copy to the clipboard, or export any network policy defined in that namespace, as shown in the following example.
Figure 8.3. Side panel for a namespace example
![Side panel for a namespace showing network policy information](https://access.redhat.com/webassets/avalon/d/Red_Hat_Advanced_Cluster_Security_for_Kubernetes-4.3-Operating-en-US/images/e4acdcc0c5cdea4abb69e5b13adb3464/network-graph-20-namespace-mode.png)
8.1.2. Access control and permissions
To view network graphs, the user must have at least the permissions granted to the Network Graph Viewer default permission set.
The following permissions are granted to the Network Graph Viewer permission set:
-
Read
Deployment
-
Read
NetworkGraph
-
Read
NetworkPolicy
For more information, see "System permission sets" in the "Additional resources" section.
Additional resources
8.1.3. Viewing deployment information
The network graph provides a visual map of deployments, namespaces, and connections that RHACS has discovered. By clicking on a deployment in the graph, you can view information about the deployment, including the following details:
- Network security, such as the number of flows, existing or missing network policy rules, and listening ports
- Labels and annotations
- Port configurations
- Container information
- Anomalous and baseline flows for ingress and egress connections, including protocols and port numbers
- Network policies
Procedure
To view details for deployments in a namespace:
- In the RHACS portal, navigate to Network Graph and select your cluster from the drop-down list.
- Click the Namespaces list and use the search field to locate a namespace, or select individual namespaces.
- Click the Deployments list and use the search field to locate a deployment, or select individual deployments to display in the network graph.
- In the network graph, click on a deployment to view the information panel.
- Click the Details, Flows, Baseline, or Network policies tab to view the corresponding information.
8.1.4. Viewing network policies in the network graph
Network policies specify how groups of pods are allowed to communicate with each other and with other network endpoints. Kubernetes NetworkPolicy
resources use labels to select pods and define rules that specify what traffic is allowed to or from the selected pods. RHACS discovers and displays network policy information for all your Kubernetes clusters, namespaces, deployments, and pods, in the network graph.
Procedure
- In the RHACS portal, navigate to Network Graph and select your cluster from the drop-down list.
- Click the Namespaces list and select individual namespaces, or use the search field to locate a namespace.
- Click the Deployments list and select individual deployments, or use the search field to locate a deployment.
- In the network graph, click on a deployment to view the information panel.
In the Details tab, in the Network security section, you can view summary messages about network policy rules that give the following information:
- If policies exist in the network that regulate ingress or egress traffic
- If your network is missing policies and is therefore allowing all ingress or egress traffic
- To view the YAML file for the network policies, you can click on the policy rule, or click the Network policies tab.
8.1.5. Configuring CIDR blocks in the network graph
You can specify custom CIDR blocks or configure the display of auto-discovered CIDR blocks in the network graph.
Procedure
In the RHACS portal, navigate to Network Graph, and then select Manage CIDR Blocks. You can perform the following actions:
Toggle Auto-discovered CIDR blocks to hide auto-discovered CIDR blocks in the network graph.
NoteWhen you hide the auto-discovered CIDR blocks, the auto-discovered CIDR blocks are hidden for all clusters, and not only for the selected cluster in the network graph.
Add a custom CIDR block to the graph by performing the following steps:
- Enter the CIDR name and CIDR address in the fields. To add additional CIDR blocks, click Add CIDR block and enter information for each block.
- Click Update Configuration to save the changes.
8.2. Using the network graph to generate and simulate network policies
8.2.1. About generating policies from the network graph
A Kubernetes network policy controls which pods receive incoming network traffic, and which pods can send outgoing traffic. By using network policies to enable and disable traffic to or from pods, you can limit your network attack surface.
These network policies are YAML configuration files. It is often difficult to gain insights into the network flow and manually create these files. You can use RHACS to generate these files. When you automatically generate network policies, RHACS follows these guidelines:
RHACS generates a single network policy for each deployment in the namespace. The pod selector for the policy is the pod selector of the deployment.
If a deployment already has a network policy, RHACS does not generate new policies or delete existing policies.
Generated policies only restrict traffic to existing deployments.
- Deployments that you create later will not have any restrictions unless you create or generate new network policies for them.
- If a new deployment needs to contact a deployment with a network policy, you might need to edit the network policy to allow access.
-
Each policy has the same name as the deployment name, prefixed with
stackrox-generated-
. For example, the policy name for the deploymentdepABC
in the generated network policy isstackrox-generated-depABC
. All generated policies also have an identifying label. RHACS generates a single rule allowing traffic from any IP address if one of the following conditions are met:
- The deployment has an incoming connection from outside the cluster within the selected time
- The deployment is exposed through a node port or load balancer service
RHACS generates one
ingress
rule for every deployment from which there is an incoming connection.- For deployments in the same namespace, this rule uses the pod selector labels from the other deployment.
-
For deployments in different namespaces, this rule uses a namespace selector. To make this possible, RHACS automatically adds a label,
namespace.metadata.stackrox.io/name
, to each namespace.
In rare cases, if a standalone pod does not have any labels, the generated policy allows traffic from or to the pod’s entire namespace.
8.2.2. Generating network policies in the network graph
RHACS lets you automatically generate network policies based on the actual observed network communication flows in your environment.
You can generate policies based on the cluster, namespaces, and deployments that you have selected in the network graph. Policies are generated for any deployments that are included in the current Network Graph scope. For example, the current scope could include the entire cluster, a cluster and namespaces, or individually selected deployments in the selected namespaces. You can also further reduce the scope by applying one of the filters from the Filter deployments field with any combination of the cluster, namespace, and deployment selections. For example, you could narrow the scope to deployments in a specific cluster and namespace that are affected by a specific CVE. Policies are generated from the traffic observed during the baseline discovery period.
- In the RHACS portal, navigate to Network Graph.
- Select a cluster, and then select one or more namespaces.
- Optional: Select individual deployments to restrict the policy generated to only those deployments. You can also use the Filter deployments feature to further narrow the scope.
- In the network graph header, select Network policy generator.
Optional: In the information panel that opens, select Exclude ports & protocols to remove the port/protocol restrictions when generating network policies from a baseline.
As an example, the
nginx3
deployment makes a port 80 connection tonginx4
, and this is included as part of the baseline fornginx4
. If policies are generated and this checkbox is not selected (the default behavior), the generated policy will restrict the allowed connections fromnginx3
tonginx4
to only port 80. If policies are generated with this option selected, the generated policy will allow any port in the connection fromnginx3
tonginx4
.Click Generate and simulate network policies. RHACS generates policies for the scope that you have chosen. This scope is displayed at the top of the Generate network policies panel.
NoteClicking on the deployment information in the scope displays a list of the deployments that are included.
- Optional: Copy the generated network policy configuration YAML file to the clipboard or download it by clicking the download icon in the panel.
Optional: To compare the generated network policies to the existing network policies, click Compare. The YAML files for existing and generated network policies are shown in a side-by-side view.
NoteSome items do not have generated policies, such as namespaces with existing ingress policies or deployments in certain protected namespaces such as as
stackrox
oracs
.Optional: Click the Actions menu to perform the following activities:
-
Share the YAML file with notifiers: Sends the YAML file to one of the system notifiers you have configured, for example, Slack, ServiceNow, or an application that uses generic webhooks. These notifiers are configured by navigating to Platform Configuration
Integrations. See the documentation in the "Additional resources" section for more information. - Rebuild rules from active traffic: Refreshes the generated policies that are displayed.
- Revert rules to previously applied YAML: Removes the simulated policy and reverts to the last network policy.
-
Share the YAML file with notifiers: Sends the YAML file to one of the system notifiers you have configured, for example, Slack, ServiceNow, or an application that uses generic webhooks. These notifiers are configured by navigating to Platform Configuration
8.2.3. Saving generated policies in the network graph
You can download and save the generated network policies from RHACS. Use this option to download policies so that you can commit the policies into a version control system such as Git.
Procedure
- After generating a network policy, click the Download YAML icon in the Network Policy Simulator panel.
8.2.4. Testing generated policies in the network graph
After you download the network policies that RHACS generates, you can test them by applying them to your cluster by using the CLI or your automated deployment procedures. You cannot apply generated network policies directly in the network graph.
Procedure
To create policies using the saved YAML file, run the following command:
$ oc create -f "<generated_file>.yml" 1
- 1
- If you use Kubernetes, enter
kubectl
instead ofoc
.
If the generated policies cause problems, you can remove them by running the following command:
$ oc delete -f "<generated_file>.yml" 1
- 1
- If you use Kubernetes, enter
kubectl
instead ofoc
.
Directly applying network policies might cause problems for running applications. Always download and test the network policies in a development environment or test clusters before applying them to production workloads.
8.2.5. Reverting to a previously applied policy in the network graph
You can remove a policy and revert to a previously applied policy.
Procedure
- In the RHACS portal, navigate to Network Graph.
- Select a cluster name from the menu on the top bar.
- Select one or more namespaces and deployments.
- Select Simulate network policy.
- Select View active YAMLS.
From the Actions menu, select Revert rules to previously applied YAML.
WarningDirectly applying network policies might cause problems for running applications. Always download and test the network policies in a development environment or test clusters before applying them to production workloads.
8.2.6. Deleting all policies autogenerated in the network graph
You can delete all automatically generated policies from your cluster that you have created by using RHACS.
Procedure
Run the following command:
$ oc get ns -o jsonpath='{.items[*].metadata.name}' | \ xargs -n 1 oc delete networkpolicies -l \ 'network-policy-generator.stackrox.io/generated=true' -n 1
- 1
- If you use Kubernetes, enter
kubectl
instead ofoc
.
8.2.7. Simulating network policies from the network graph
Your current network policies might allow unneeded network communications. You can use the network policy generator to create network policies that restrict ingress traffic to the computed baselines for a set of deployments.
The Network Graph does not display the generated policies in the visualization. Generated policies are only for ingress traffic and policies that restrict egress traffic are not generated.
Procedure
- In the RHACS portal, navigate to Network Graph.
- Select a cluster, and then select one or more namespaces.
- On the network graph header, select Network policy generator.
- Optional: To generate a YAML file with network policies to use in the simulation, click Generate and simulate network policies. For more information, see "Generating network policies in the network graph".
Upload a YAML file of a network policy that you want to use in the simulation. The network graph view displays what your proposed network policies would achieve. Perform the following steps:
- Click Upload YAML and then select the file.
- Click Open. The system displays a message to indicate the processing status of the uploaded policy.
You can view active YAML files that correspond to the current network policies by clicking the View active YAMLS tab, and then selecting policies from the drop-down list. You can also perform the following actions:
- Click the appropriate button to copy or download the displayed YAML file.
- Use the Actions menu to rebuild rules from active traffic or revert rules to a previously applied YAML. For more information, see "Generating network policies in the network graph".
Additional resources
8.3. About network baselining in the network graph
In RHACS, you can minimize your risks by using network baselining. It is a proactive approach to keep your infrastructure secure. RHACS first discovers existing network flows and creates a baseline, and then it treats network flows outside of this baseline as anomalous.
When you install RHACS, there is no default network baseline. As RHACS discovers network flows, it creates a baseline and then it adds all discovered network flows to it, following these guidelines:
- When RHACS discovers new network activity, it adds that network flow to the network baseline.
- Network flows do not show up as anomalous flows and do not trigger any violations.
After the discovery phase, the following actions occur:
- RHACS stops adding network flows to the network baselines.
- New network flows that are not in the network baseline show up as anomalous flows but they do not trigger any violations.
8.3.1. Viewing network baselines from the network graph
You can view network baselines from the network graph view.
Procedure
- Click the Namespaces list and use the search field to locate a namespace, or select individual namespaces.
- Click the Deployments list and use the search field to locate a deployment, or select individual deployments to display in the network graph.
- In the network graph, click on a deployment to view the information panel.
- Select the Baseline tab. Use the filter by entity name field to further restrict the flows that are displayed.
Optional: You can mark baseline flows as anomalous by performing one of the following actions:
-
Select an individual entity, and then click
and select Mark as anomalous.
- Select multiple entities, and then click Bulk actions and select Mark as anomalous.
-
Select an individual entity, and then click
- Optional: Check the box to exclude ports and protocols.
- Optional: To save the baseline as a network policy YAML file, click Download baseline as network policy.
8.3.2. Downloading network baselines from the network graph
You can download network baselines as YAML files from the network graph view.
Procedure
- In the RHACS portal, navigate to Network Graph.
- Click the Namespaces list and use the search field to locate a namespace, or select individual namespaces.
- Click the Deployments list and use the search field to locate a deployment, or select individual deployments to display in the network graph.
- In the network graph, click on a deployment to view the information panel.
- The Baseline tab lists the baseline flows. Use the filter by entity name field to further restrict the list of flows.
- Optional: Check the box to exclude ports and protocols.
- Click Download baseline as network policy.
8.3.3. Configuring network baselining time frame
You can use the ROX_NETWORK_BASELINE_OBSERVATION_PERIOD
and the ROX_BASELINE_GENERATION_DURATION
environment variables to configure the observation period and the network baseline generation duration.
Procedure
Set the
ROX_NETWORK_BASELINE_OBSERVATION_PERIOD
environment variable:$ oc -n stackrox set env deploy/central \1 ROX_NETWORK_BASELINE_OBSERVATION_PERIOD=<value> 2
Set the
ROX_BASELINE_GENERATION_DURATION
environment variable:$ oc -n stackrox set env deploy/central \1 ROX_BASELINE_GENERATION_DURATION=<value> 2
8.3.4. Enabling alerts on baseline violations in the network graph
You can configure RHACS to detect anomalous network flows and trigger violations for traffic that is not in the baseline. This can help you determine if the network contains unwanted traffic before you block traffic with a network policy.
Procedure
- Click the Namespaces list and use the search field to locate a namespace, or select individual namespaces.
- Click the Deployments list and use the search field to locate a deployment, or select individual deployments to display in the network graph.
- In the network graph, click on a deployment to view the information panel.
- In the Baseline tab, you can view baseline flows. Use the filter by entity name field to further restrict the flows that are displayed.
Toggle the Alert on baseline violations option.
- After you toggle the Alert on baseline violations option, anomalous network flows trigger violations.
- You can toggle the Alert on baseline violations option again to stop receiving violations for anomalous network flows.