Red Hat SummitChapter 11. Hardware enablement
The following chapters contain the most notable changes to hardware enablement between RHEL 9 and RHEL 10.
11.1. Unmaintained hardware support
The following devices (drivers, adapters) are available but are no longer tested or updated on a routine basis in RHEL 10. Red Hat may fix serious bugs, including security bugs, at its discretion. These devices should no longer be used in production, and it is possible they will be disabled in the next major release.
PCI device IDs are in the format of vendor:device:subvendor:subdevice. If no device ID is listed, all devices associated with the corresponding driver are unmaintained. To check the PCI IDs of the hardware on your system, run the lspci -nn command.
| Device ID | Driver | Device description |
|---|---|---|
| aacraid | Dell PERC2, 2/Si, 3/Si, 3/Di, Adaptec Advanced Raid Products, HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver | |
| af_key | PF_KEY sockets | |
| ahci_seattle | Seattle AHCI SATA platform driver | |
| ahci_xgene | APM X-Gene AHCI SATA driver | |
| arp_tables | ARP tables support | |
| 0x10df:0xe220 | be2net | Emulex Corporation: OneConnect NIC (Lancer) |
| bnx2 | ||
| bnx2fc | QLogic FCoE Driver | |
| bnx2i | QLogic NetXtreme II BCM5706/5708/5709/57710/57711/57712/57800/57810/57840 iSCSI Driver | |
| bnx2x | QLogic BCM57710/57711/57711E/57712/57712_MF/57800/57800_MF/57810/57810_MF/57840/57840_MF Driver | |
| cnic | QLogic cnic Driver | |
| dl2k | ||
| ebtables | Ethernet Bridge tables (ebtables) support | |
| e1000 | Intel® PRO/1000 Network Driver | |
| hdlc_fr | ||
| hisi_sas_main | HISILICON SAS controller driver | |
| hpsa | Driver for HP Smart Array Controller | |
| ip_set | IP set support | |
| ip_tables | IP tables support (required for filtering/masq/NAT) | |
| ip6_tables | IP6 tables support (required for filtering) | |
| 0x10df:0x0724 | lpfc | Emulex Corporation: OneConnect FCoE Initiator (Skyhawk) |
| 0x10df:0xe200 | lpfc | Emulex Corporation: LPe15000/LPe16000 Series 8Gb/16Gb Fibre Channel Adapter |
| 0x10df:0xf011 | lpfc | Emulex Corporation: Saturn: LightPulse Fibre Channel Host Adapter |
| 0x10df:0xf015 | lpfc | Emulex Corporation: Saturn: LightPulse Fibre Channel Host Adapter |
| 0x10df:0xf100 | lpfc | Emulex Corporation: LPe12000 Series 8Gb Fibre Channel Adapter |
| 0x10df:0xfc40 | lpfc | Emulex Corporation: Saturn-X: LightPulse Fibre Channel Host Adapter |
| 0x1000:0x005b | megaraid_sas | Broadcom / LSI: MegaRAID SAS 2208 [Thunderbolt] |
| 0x1000:0x0071 | megaraid_sas | Broadcom / LSI: MR SAS HBA 2004 |
| 0x1000:0x0073 | megaraid_sas | Broadcom / LSI: MegaRAID SAS 2008 [Falcon] |
| 0x1000:0x0079 | megaraid_sas | Broadcom / LSI: MegaRAID SAS 2108 [Liberator] |
| mptbase | Fusion MPT base driver | |
| mptsas | ||
| 0x1000:0x006E | mpt3sas | Broadcom / LSI: SAS2308 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0080 | mpt3sas | Broadcom / LSI: SAS2208 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0081 | mpt3sas | Broadcom / LSI: SAS2208 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0082 | mpt3sas | Broadcom / LSI: SAS2208 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0083 | mpt3sas | Broadcom / LSI: SAS2208 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0084 | mpt3sas | Broadcom / LSI: SAS2208 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0085 | mpt3sas | Broadcom / LSI: SAS2208 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0086 | mpt3sas | Broadcom / LSI: SAS2308 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0087 | mpt3sas | Broadcom / LSI: SAS2308 PCI-Express Fusion-MPT SAS-2 |
| mptscsih | Fusion MPT SCSI Host driver | |
| mptspi | Fusion MPT SPI Host driver | |
| myri10ge | Myricom 10G driver (10GbE) | |
| netxen_nic | QLogic/NetXen (1/10) GbE Intelligent Ethernet Driver | |
| nft_compat | Netfilter x_tables over nf_tables module | |
| nicpf | ||
| nicvf | ||
| nvmet_fc | ||
| nvmet_tcp | ||
| 0x1077:0x2031 | qla2xxx | QLogic Corp.: ISP8324-based 16Gb Fibre Channel to PCI Express Adapter |
| 0x1077:0x2532 | qla2xxx | QLogic Corp.: ISP2532-based 8Gb Fibre Channel to PCI Express HBA |
| 0x1077:0x8031 | qla2xxx | QLogic Corp.: 8300 Series 10GbE Converged Network Adapter (FCoE) |
| 0x1924:0x0803 | sfc | Solarflare Communications: SFC9020 10G Ethernet Controller |
| 0x1924:0x0813 | sfc | Solarflare Communications: SFL9021 10GBASE-T Ethernet Controller |
| team | Ethernet team driver support |
11.2. Removed hardware support
The following devices (drivers, adapters) have been removed from RHEL 10.
PCI device IDs are in the format of vendor:device:subvendor:subdevice. If no device ID is listed, all devices associated with the corresponding driver are unmaintained. To check the PCI IDs of the hardware on your system, run the lspci -nn command.
| Device ID | Driver | Device description |
|---|---|---|
| firewire_core | ||
| mlx4 | ||
| nfp | Netronome NFP driver | |
| qla3xxx | QLogic ISP3XXX Network Driver | |
| qla4xxx | QLogic ISP4XXX and ISP82XX iSCSI Host Adapter | |
| rdma_rxe | ||
| usnic_verbs | Cisco VIC (usNIC) Verbs Driver |
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}