Red Hat Summit Red Hat SummitSupportConsoleDevelopersStart a trialContact

Chapter 8. Deploying and configuring a Postfix SMTP server

You can configure your email infrastructure by using the Postfix mail transport agent (MTA) to transport email messages between hosts by using the SMTP protocol. Postfix is a server-side application for routing and delivering mail.

You can use Postfix to set up a local mail server, create a null-client mail relay, use a Postfix server as a destination for multiple domains, or choose an LDAP directory instead of files for lookups.

The postfix package provides multiple configuration files in the /etc/postfix/ directory.

To configure your email infrastructure, use the following configuration files:

  • main.cf - contains the global configuration of Postfix.
  • master.cf - specifies Postfix interaction with various processes to accomplish mail delivery.
  • access - specifies access rules, for example hosts that are allowed to connect to Postfix.
  • transport - maps email addresses to relay hosts.
  • aliases - contains a configurable list required by the mail protocol that describes user ID aliases. Note that you can find this file in the /etc/ directory.

The key features of Postfix:

  • Security features to protect against common email related threats
  • Customization options, including support for virtual domains and aliases

You can configure your Postfix SMTP server to receive, store, and deliver email messages. If you do not select the mail server package during the system installation, Postfix will not be available by default.

Prerequisites

Procedure

  1. Remove the Sendmail utility: 

    # yum remove sendmail

  2. Install Postfix: 

    # yum install postfix

  3. To configure Postfix, edit the /etc/postfix/main.cf file and make the following changes:

    1. By default, Postfix receives emails only on the loopback interface. To configure Postfix to listen on specific interfaces, update the inet_interfaces parameter to the IP addresses of these interfaces: 

      inet_interfaces = 127.0.0.1/32, [::1]/128, 192.0.2.1, [2001:db8:1::1]

      To configure Postfix to listen on all interfaces, set: 

      inet_interfaces = all

    2. If you want that Postfix uses a different hostname than the fully-qualified domain name (FQDN) that is returned by the gethostname() function, add the myhostname parameter: 

      myhostname = smtp.example.com

      For example, Postfix adds this hostname to the header of emails it processes.

    3. If the domain name differs from the one in the myhostname parameter, add the mydomain parameter: 

      mydomain = example.com

    4. Add the myorigin parameter and set it to the value of mydomain: 

      myorigin = $mydomain

      With this setting, Postfix uses the domain name as origin for locally posted mails instead of the hostname.

    5. Add the mynetworks parameter, and define the IP ranges of trusted networks that are allowed to send mails: 

      mynetworks = 127.0.0.1/32, [::1]/128, 192.0.2.1/24, [2001:db8:1::1]/64

      If clients from non-trustworthy networks, such as the internet, should be able to send mails through this server, you must configure relay restrictions in a later step.

  4. Verify if the Postfix configuration in the main.cf file is correct: 

    # postfix check

  5. Enable the postfix service to start at boot and start it: 

    # systemctl enable --now postfix

  6. Allow the smtp traffic through firewall and reload the firewall rules: 

    # firewall-cmd --permanent --add-service smtp
# firewall-cmd --reload

Verification

  1. Verify that the postfix service is running: 

    # systemctl status postfix

    • Optional: Restart the postfix service, if the output is stopped, waiting, or the service is not running: 

      # systemctl restart postfix

    • Optional: Reload the postfix service after changing any options in the configuration files in the /etc/postfix/ directory to apply those changes: 

      # systemctl reload postfix

  2. Verify the email communication between local users on your system: 

    # echo "This is a test message" | mail -s <subject> <user@mydomain.com>

  3. To verify that your mail server does not relay emails from external IP ranges to foreign domains, follow the below mentioned procedure:

    1. Log in to a client which is not within the subnets that you defined in mynetworks.
    2. Configure the client to use your mail server.
    3. Try to send an email to an email address that is not under the domain you specified in mydomain on your mail server. For example, try to send an email to non-existing-user@redhat.com.

    4. Check the /var/log/maillog file: 

      554 Relay access denied - the server is not going to relay.
250 OK or similar - the server is going to relay.

Troubleshooting

  • In case of errors, check the /var/log/maillog file.

8.2. Customizing TLS settings of a Postfix server
Copy link

With Transport Layer Security (TLS), you can encrypt email traffic to increase the security. For example, you can customize TLS settings and use a certificate from a trusted certificate authority (CA) instead of the self-signed certificate.

In RHEL 8, the TLS encryption protocol is enabled in the Postfix server by default. The basic Postfix TLS configuration contains self-signed certificates for inbound SMTP and the opportunistic TLS for outbound SMTP.

Prerequisites

  • You have the postfix package installed on your server.
  • You have a certificate signed by a trusted certificate authority (CA) and a private key.

  • You have copied the following files to the Postfix server:

    • The server certificate: /etc/pki/tls/certs/postfix.pem
    • The private key: /etc/pki/tls/private/postfix.key

Procedure

  1. Set the path to the certificate and private key files on the server where Postfix is running by adding the following lines to the /etc/postfix/main.cf file: 

    smtpd_tls_cert_file = /etc/pki/tls/certs/postfix.pem
smtpd_tls_key_file = /etc/pki/tls/private/postfix.key

  2. Restrict the incoming SMTP connections to authenticated users only by editing the /etc/postfix/main.cf file: 

    smtpd_tls_auth_only = yes

  3. Reload the postfix service to apply the changes: 

    # systemctl reload postfix

Verification

  • Configure your client to use TLS encryption and send an email.

    Note

    To get additional information about Postfix client TLS activity, increase the log level from 0 to 1 by changing the following line in the /etc/postfix/main.cf: 

    smtp_tls_loglevel = 1

If you want to forward all email to a mail relay, you can configure Postfix server as a null client. In this configuration Postfix only forwards mail to a different mail server and is not capable of receiving mail.

Prerequisites

  • You have the postfix package installed on your server.
  • You have the IP address or hostname of the relay host to which you want to forward emails.

Procedure

  1. To prevent Postfix from accepting any local email delivery and making it a null client, edit the /etc/postfix/main.cf file and make the following changes:

    1. Configure Postfix to forward all email by setting the mydestination parameter equal to an empty value: 

      mydestination =

      In this configuration the Postfix server is not a destination for any email and acts as a null client.

    2. Specify the mail relay server that receives the email from your null client: 

      relayhost = [<ip_address_or_hostname>]

      The relay host is responsible for the mail delivery. Enclose <ip_address_or_hostname> in square brackets.

    3. Configure the Postfix mail server to listen only on the loopback interface for emails to deliver: 

      inet_interfaces = loopback-only

    4. If you want Postfix to rewrite the sender domain of all outgoing emails to the company domain of your relay mail server, set: 

      myorigin = relay.example.com

    5. To disable the local mail delivery, add the following directive at the end of the configuration file: 

      local_transport = error: local delivery disabled

    6. Add the mynetworks parameter so that Postfix forwards email from the local system originating from the 127.0.0.0/8 IPv4 network and the [::1]/128 IPv6 network to the mail relay server: 

      mynetworks = 127.0.0.0/8, [::1]/128

  2. Verify if the Postfix configuration in the main.cf file is correct: 

    # postfix check

  3. Restart the postfix service to apply the changes: 

    # systemctl restart postfix

Verification

  • Verify that the email communication is forwarded to the mail relay: 

    # echo "This is a test message" | mail -s <subject> <user@example.com>

Troubleshooting

  • In case of errors, check the /var/log/maillog file.

You can configure Postfix as a mail server that can receive emails for multiple domains. In this configuration, Postfix acts as the final destination for emails sent to addresses within the specified domains.

You can configure the following scenarios:

  • Set up multiple email addresses that point to the same email destination
  • Route incoming email for multiple domains to the same Postfix server

Prerequisites

  • You have configured a Postfix server.

Procedure

  1. In the /etc/postfix/virtual virtual alias file, specify the email addresses for each domain. Add each email address on a new line: 

    <info@example.com>   <user22@example.net>
<sales@example.com>  <user11@example.org>

    In this example, Postfix redirects all emails sent to info@example.com to user22@example.net and email sent to sales@example.com to user11@example.org.

  2. Create a hash file for the virtual alias map: 

    # postmap /etc/postfix/virtual

    This command creates the /etc/postfix/virtual.db file. Note that you must always re-run this command after you update the /etc/postfix/virtual file.

  3. In the Postfix /etc/postfix/main.cf configuration file, add the virtual_alias_maps parameter and point it to the hash file: 

    virtual_alias_maps = hash:/etc/postfix/virtual

  4. Reload the postfix service to apply the changes: 

    # systemctl reload postfix

Verification

  • Test the configuration by sending an email to one of the virtual email addresses.

Troubleshooting

  • In case of errors, check the /var/log/maillog file.

8.5. Using an LDAP directory as a lookup table
Copy link

If you use a Lightweight Directory Access Protocol (LDAP) server to store accounts, domains or aliases, you can configure Postfix to use the LDAP server as a lookup table. Using LDAP instead of files for lookups enables you to have a central database.

Prerequisites

  • You have the postfix package installed on your server.
  • You have an LDAP server with the required schema and user credentials.
  • You have the postfix-ldap plugin installed on the server running Postfix.

Procedure

  1. Configure the LDAP lookup parameters by creating a /etc/postfix/ldap-aliases.cf file with the following content:

    1. Specify the hostname of the LDAP server: 

      server_host = ldap.example.com

    2. Specify the base domain name for the LDAP search: 

      search_base = dc=example,dc=com
    3. Optional: Customize the LDAP search filter and attributes based on your requirements. The filter for searching the directory defaults to query_filter = mailacceptinggeneralid=%s.

  2. Enable the LDAP source as a lookup table in the /etc/postfix/main.cf configuration file by adding the following content: 

    virtual_alias_maps = ldap:/etc/postfix/ldap-aliases.cf

    For further details, see the /usr/share/doc/postfix/README_FILES/LDAP_README and /usr/share/doc/postfix/README_FILES/DATABASE_README files.

  3. Verify the LDAP configuration by running the postmap command, which checks for any syntax errors or connectivity issues: 

    # postmap -q @example.com ldap:/etc/postfix/ldap-aliases.cf

  4. Reload the postfix service to apply the changes: 

    # systemctl reload postfix

Verification

  • Send a test email to verify that the LDAP lookup works correctly. Check the mail logs in /var/log/maillog for any errors.

You can configure Postfix to relay mail for authenticated users. In this scenario, you allow users to authenticate themselves and use their email address to send mail through your SMTP server by configuring Postfix as an outgoing mail server.

Prerequisites

  • You have configured a Postfix server.

Procedure

  1. To configure Postfix as an outgoing mail server, edit the /etc/postfix/main.cf file and add the following:

    1. Enable SMTP authentication: 

      smtpd_sasl_auth_enable = yes
broken_sasl_auth_clients = yes

    2. Disable access without TLS: 

      smtpd_tls_auth_only = yes

    3. Allow mail relaying only for authenticated users: 

      smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination

    4. Optional: Restrict users to use their own email address only as a sender: 

      smtpd_sender_restrictions = reject_sender_login_mismatch

  2. Reload the postfix service to apply the changes: 

    # systemctl reload postfix

Verification

  • Authenticate in your SMTP client that supports TLS and SASL. Send a test email to verify that the SMTP authentication works correctly.

You can configure Postfix to deliver incoming mail to Dovecot on the same host using LMTP over a UNIX socket. This socket enables direct communication between Postfix and Dovecot on the local machine.

Prerequisites

Procedure

  1. Configure Postfix to use the LMTP protocol and the UNIX domain socket for delivering mail to Dovecot in the /etc/postfix/main.cf file:

    • If you want to use virtual mailboxes, add the following content: 

      virtual_transport = lmtp:unix:/var/run/dovecot/lmtp

    • If you want to use non-virtual mailboxes, add the following content: 

      mailbox_transport = lmtp:unix:/var/run/dovecot/lmtp

  2. Reload postfix to apply the changes: 

    # systemctl reload postfix

Verification

  • Send a test email to verify that the LMTP socket works correctly. Check the mail logs in /var/log/maillog for any errors.

You can establish a secure connection between Postfix mail server and the Dovecot delivery agent over the network. To do so, configure the LMTP service to use a network socket for delivering mail between mail servers.

By default, the LMTP protocol is not encrypted. However, if you configured TLS encryption, Dovecot uses the same settings automatically for the LMTP service. SMTP servers can then connect to it by using the STARTTLS command over LMTP.

Prerequisites

Procedure

  1. Configure Postfix to use the LMTP protocol and the INET domain socket for delivering mail to Dovecot in the /etc/postfix/main.cf file by adding the following content: 

    mailbox_transport = lmtp:inet:<dovecot_host>:<port>

    Replace <dovecot_host> with the IP address or hostname of the Dovecot server and <port> with the port number of the LMTP service.

  2. Reload the postfix service to apply the changes: 

    # systemctl reload postfix

Verification

  • Send a test email to an address hosted by the remote Dovecot server and check the Dovecot logs to ensure that the mail was successfully delivered.

8.9. Securing the Postfix service
Copy link

Secure the Postfix mail transfer agent by configuring it to use encryption and applying settings that mitigate risks from various attacks. This involves configuring SMTP Authentication (AUTH) using SASL and setting limits to reduce vulnerability to denial-of-service (DoS) attacks.

Postfix is a mail transfer agent (MTA) that uses the Simple Mail Transfer Protocol (SMTP) to deliver electronic messages between other MTAs and to email clients or delivery agents. Although MTAs can encrypt traffic between one another, they might not do so by default.

You can limit denial-of-service (DoS) attacks by configuring certain Postfix options. This involves setting strict rate and message-size limits to protect the server from being flooded with traffic.

An attacker can flood the server with traffic or send information that triggers a crash, causing a denial of service (DoS) attack. You can configure your system to reduce the risk of such attacks by setting limits in the /etc/postfix/main.cf file. You can change the value of the existing directives, or you can add new directives with custom values in the <directive> = <value> format.

Use the following list of directives for limiting DoS attacks:

smtpd_client_connection_rate_limit
Limits the maximum number of connection attempts any client can make to this service per time unit. The default value is 0, which means a client can make as many connections per time unit as Postfix can accept. By default, the directive excludes clients in trusted networks.
anvil_rate_time_unit
Defines a time unit to calculate the rate limit. The default value is 60 seconds.
smtpd_client_event_limit_exceptions
Excludes clients from the connection and rate limit commands. By default, the directive excludes clients in trusted networks.
smtpd_client_message_rate_limit
Defines the maximum number of message deliveries from client to request per time unit (regardless of whether or not Postfix actually accepts those messages).
default_process_limit
Defines the default maximum number of Postfix child processes that provide a given service. You can ignore this rule for specific services in the master.cf file. By default, the value is 100.
queue_minfree
Defines the minimum amount of free space required to receive mail in the queue file system. The directive is currently used by the Postfix SMTP server to decide if it accepts any mail at all. By default, the Postfix SMTP server rejects MAIL FROM commands when the amount of free space is less than 1.5 times the message_size_limit. To specify a higher minimum free space limit, specify a queue_minfree value that is at least 1.5 times the message_size_limit. By default, the queue_minfree value is 0.
header_size_limit
Defines the maximum amount of memory in bytes for storing a message header. If a header is large, it discards the excess header. By default, the value is 102400 bytes.
message_size_limit
Defines the maximum size of a message, including the envelope information, in bytes. By default, the value is 10240000 bytes.

8.9.3. Configuring Postfix to use SASL
Copy link

You can configure the Postfix mail transfer agent to use Simple Authentication and Security Layer (SASL). This strengthens authentication when sending and receiving electronic messages.

Postfix supports SASL-based SMTP Authentication (AUTH). SMTP AUTH is an extension of the Simple Mail Transfer Protocol. Currently, the Postfix SMTP server supports the SASL implementations in the following ways:

Dovecot SASL
The Postfix SMTP server can communicate with the Dovecot SASL implementation by using either a UNIX-domain socket or a TCP socket. Use this method if Postfix and Dovecot applications are running on separate machines.
Cyrus SASL
When enabled, SMTP clients must authenticate with the SMTP server by using an authentication method supported and accepted by both the server and the client.

Prerequisites

  • The dovecot package is installed on the system

Procedure

  1. Set up Dovecot:

    1. Include the following lines in the /etc/dovecot/conf.d/10-master.conf file: 

      service auth {
  unix_listener /var/spool/postfix/private/auth {
    mode = 0660
    user = postfix
    group = postfix
  }
}

      The previous example uses UNIX-domain sockets for communication between Postfix and Dovecot. The example also assumes default Postfix SMTP server settings, which include the mail queue located in the /var/spool/postfix/ directory, and the application running under the postfix user and group.

    2. Optional: Set up Dovecot to listen for Postfix authentication requests through TCP: 

      service auth {
  inet_listener {
      port = <port-number>
  }
}

    3. Specify the method that the email client uses to authenticate with Dovecot by editing the auth_mechanisms parameter in /etc/dovecot/conf.d/10-auth.conf file: 

      auth_mechanisms = plain login

      The auth_mechanisms parameter supports different plaintext and non-plaintext authentication methods.

  2. Set up Postfix by modifying the /etc/postfix/main.cf file:

    1. Enable SMTP Authentication on the Postfix SMTP server: 

      smtpd_sasl_auth_enable = yes

    2. Enable the use of Dovecot SASL implementation for SMTP Authentication: 

      smtpd_sasl_type = dovecot

    3. Provide the authentication path relative to the Postfix queue directory. Note that the use of a relative path ensures that the configuration works regardless of whether the Postfix server runs in chroot or not: 

      smtpd_sasl_path = private/auth

      This step uses UNIX-domain sockets for communication between Postfix and Dovecot.

      To configure Postfix to look for Dovecot on a different machine in case you use TCP sockets for communication, use configuration values similar to the following: 

      smtpd_sasl_path = inet: <IP_address> : <port_number>

      In the previous example, replace the ip-address with the IP address of the Dovecot machine and port-number with the port number specified in Dovecot’s /etc/dovecot/conf.d/10-master.conf file.

    4. Specify SASL mechanisms that the Postfix SMTP server makes available to clients. Note that you can specify different mechanisms for encrypted and unencrypted sessions. 

      smtpd_sasl_security_options = noanonymous, noplaintext
smtpd_sasl_tls_security_options = noanonymous

      The previous directives specify that during unencrypted sessions, no anonymous authentication is allowed and no mechanisms that transmit unencrypted user names or passwords are allowed. For encrypted sessions that use TLS, only non-anonymous authentication mechanisms are allowed.

Red Hat logoGithubredditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust. Explore our recent updates.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

Theme

© 2026 Red HatBack to top