Search
SupportConsoleDevelopersStart a trialContact

Chapter 1. Deploying OpenShift Container Storage

download PDF

OpenShift Container Storage 4.2 installation is supported only on existing Red Hat OpenShift Container Platform worker nodes. Follow the instructions in Section 1.1, “Installing Red Hat OpenShift Container Storage on an existing Red Hat OpenShift Container Platform” to deploy OpenShift Container Storage.

Note

When you install OpenShift Container Storage in a restricted network environment, you need to apply a custom Network Time Protocol (NTP) configuration to the nodes, because by default, internet connectivity is assumed in OpenShift Container Platform and chronyd is configured to use *.rhel.pool.ntp.org servers. See https://access.redhat.com/solutions/4828941 and Configuring chrony time service for more details.

1.1. Installing Red Hat OpenShift Container Storage on an existing Red Hat OpenShift Container Platform

The deployment process consists of two main parts:

  1. Install the OpenShift Container Storage Operator by following the instructions in Section 1.1.1, “Installing Red Hat OpenShift Container Storage Operator using the Operator Hub”.
  2. Create the OpenShift Container Storage service by following the instructions in Section 1.1.2, “Creating an OpenShift Container Storage service”.

For Red Hat Enterprise Linux based hosts in a user provisioned infrastructure (UPI), you need to enable container access to the underlying file system by following the instructions in Section 1.1.3, “Enabling file system access for containers on Red Hat Enterprise Linux based nodes”.

1.1.1. Installing Red Hat OpenShift Container Storage Operator using the Operator Hub

You can install Red Hat OpenShift Container Storage using the Red Hat OpenShift Container Platform (OCP) Operator Hub on Amazon Web Services (AWS) and VMware vSphere platforms. For information about the hardware and software requirements, see Planning your deployment.

Prerequisites

  • You must be logged into a latest OpenShift Container Platform cluster.
  • You must have at least three worker nodes in OCP cluster.

  • You must create a namespace called openshift-storage as follows:

    1. Click Administration Namespaces in the left pane of the OpenShift Web Console.
    2. Click Create Namespace.
    3. In the Create Namespace dialog box, enter openshift-storage for Name and openshift.io/cluster-monitoring=true for Labels. This label is required to get the dashboards.
    4. Select No restrictions option for Default Network Policy.
    5. Click Create.
Note

When you need to override the cluster-wide default node selector for OpenShift Container Storage, you can use the following command in command line interface to specify a blank node selector for the openshift-storage namespace: 

$ oc annotate namespace openshift-storage openshift.io/node-selector=

Procedure

  1. Click Operators OperatorHub in the left pane of the OpenShift Web Console.

    Figure 1.1. List of operators in the Operator Hub

    Screenshot of list of operators in the Operator Hub of the OpenShift Web Console.
  2. Search for OpenShift Container Storage Operator from the list of operators and click on it.
  3. On the OpenShift Container Storage Operator page, click Install.

  4. On the Create Operator Subscription page, you can set the Installation Mode, Update Channel, and Approval Strategy options.

    Figure 1.2. Create Operator Subscription page

    Screenshot of create operator subscription page.

    1. Select A specific namespace on the cluster for the Installation Mode option.

      • Select openshift-storage namespace from the drop down menu.
    2. stable-4.2 channel is selected by default for the Update Channel option.

    3. Select an Approval Strategy:

      • Automatic specifies that you want OpenShift Container Platform to upgrade OpenShift Container Storage automatically.
      • Manual specifies that you want to have control to upgrade OpenShift Container Storage manually.

  5. Click Subscribe.

    Figure 1.3. Installed operators

    Screenshot of the installed operators.

    The Installed Operators page is displayed with the status of the operator.

Verification steps

  • Verify that the OpenShift Container Storage Operator show the Status as Up-to-date.

1.1.2. Creating an OpenShift Container Storage service

You need to create a new OpenShift Container Storage service after you install OpenShift Container Storage operator on a user provisioned cloud for both Amazon Web Services (AWS) and VMware vSphere platforms.

Prerequisites

Procedure

  1. Click Operators Installed Operators from the left pane of the OpenShift Web Console to view the installed operators.
  2. On the Installed Operator page, select openshift-storage from the Project drop down list to switch to the openshift-storage project.

  3. Click OpenShift Container Storage Operator.

    OpenShift Container Storage operator creates a OCSInitialization resource automatically.

  4. On the OpenShift Container Storage Operator page, scroll right and click the Storage Cluster tab.

    Figure 1.4. OpenShift Container Storage Operator page

    Screenshot of OpenShift Container Storage operator page.
  5. On the OCS Cluster Services page, click Create OCS Cluster Service.

  6. On the Create New OCS Service page, perform the following:

    Figure 1.5. Create New OCS Service page

    Screenshot of create new OCS service page.

    1. Select at least three worker nodes from the available list of nodes for the use of OpenShift Container Storage service.

      Note
      • Ensure that the nodes are in different Location (AWS only).
      • Ensure that the selected nodes do not have the NoSchedule label (for example the selected nodes should not be master nodes).

    2. Click Create.

      The Create button is enabled only after you select three nodes. A new storage cluster of three 2 TiB volumes will be created with one volume per worker node. The default configuration uses a replication factor of 3 providing approximately 2 TiB of usable storage.

Verification steps

1.1.3. Enabling file system access for containers on Red Hat Enterprise Linux based nodes

Deploying OpenShift Container Platform on a Red Hat Enterprise Linux base in a user provisioned infrastructure (UPI) does not automatically provide container access to the underlying Ceph file system. This is a bug tracked by RHSTOR-787.

Note

This process is not necessary for hosts based on Red Hat Enterprise Linux CoreOS.

Procedure

Perform the following steps on each node in your cluster.

  1. Log in to the Red Hat Enterprise Linux based node and open a terminal.

  2. Verify that the node has access to the rhel-7-server-extras-rpms repository. 

    # subscription-manager repos --list-enabled | grep rhel-7-server

    If you do not see both rhel-7-server-rpms and rhel-7-server-extras-rpms in the output, or if there is no output, run the following commands to enable each repository. 

    # subscription-manager repos --enable=rhel-7-server-rpms
# subscription-manager repos --enable=rhel-7-server-extras-rpms

  3. Install the required packages. 

    # yum install -y policycoreutils container-selinux

  4. Persistently enable container use of the Ceph file system in SELinux. 

    # setsebool -P container_use_cephfs on
  5. Verify that containers can now access OpenShift Container Storage hosted on this node.
Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.